Osprey Packs | Hydraulics™ Reservoir Product Tour

Learn how to use, clean and maintain your Osprey Hydraulics™ Reservoir by Hydrapak®

[@TheCort3z]

When brand new, the bladder is almost like glued together in the opening. You have do what feels like tearing it apart to open it. That should really be shown in detail how it is done. For those coming for that; When taking off the slider at the top, and unfolding it, the part that should actually open is the first piece of plastic that sticks out from the top, the stiff kind-of-broad part. The start of the opening is not in the bend, which i though at first. If you look closely it looks to be welded at the edges, and there might be some air trapped between the actual weld, and what is actually the opening (Which also looks to be welded together). For measure; I guess the force required to open mine the first time was roughly 1kg.

[@themightyren]

Thanks so much for this! We were terrified of damaging it. I think this part certainly needs including in a revision video.

[@viachesslove9907]

Thanks.

[@grahamperks]

They now have a tab saying "Open Here" :)

[@arnellp8771]

Thank you! Came here for that lol

[@tonyjohnson3752]

This is a great design feature: glueing shut the fill opening ensures no water can ever get inside this reservoir, thus it will never leak.

[@57precision]

Trying to figure out how to work this reservoir without resorting to the internet is the true test of your ability to survive in the wilderness.

[@TheGreener22]

😂😂

[@midi510]

A little tip for drying after washing. The ring for a small mouth Mason jar lid fits perfectly in the opening to allow for drying after washing. I use a spring clip on the seam at the bottom of the bag to hang it upside down and dry out.

[@purplelucrezia]

Brilliant idea, thank you!

[@midi510]

@@purplelucrezia For the last year or so, I've been using a loop of string threaded through where the tube attaches to the reservoir for hanging. I like it better than the spring clip and it opens the bottom (top while hanging) of the reservoir more for better air circulation.

[@lindyallfrey-walker3148]

I've just bought my reservoir, and have had absolutely no problem opening the slider. Perhaps there's been a material change. My only negative is echoed by others. The bite valve cover should be standard and an instruction manual would be rather helpful rather than searching on KZbin! Same applies to their excellent rucksacks. I'm still finding the secret features of my Stratos pack, which I absolutely love.

[@carolboq503]

I agree. Had to watch several tube videos to figure it out. Still can’t figure out how to attach hiking poles. Instructions are totally missing. Ugh.

[@sarahnevin9617]

I had a hell of a time getting mine open the first time. Really thought I was going to break it! Otherwise, it's been a while since I've had a bladder and I like some of the features on this one vs the older ones I've had from other brands.

[@OllyParryJones]

This does look like a huge improvement over the older model. Much easier to clean and dry properly, as well.

[@CornerOfTheAttic]

It’s taken me ages to work out how to open the mouth of the bladder. I thought I was breaking it trying to peel it open. It’s only in the part of the video where water is being poured in that I knew I was in the right spot, but again, peeling it open I thought I was pulling something apart that was not meant to be pulled apart.

[@liseneer4070]

Same here. That's where I'm stuck. Don't want to rip it apart unnecessarily!

[@CornerOfTheAttic]

@@liseneer4070 it’ll just peel back, feels wrong but once it opens it’s fine. Frustrating though.

[@davidpeterson5186]

I just used my Osprey 2.5 l bladder for the first time today and was very happy with its performance. This KZbin video was very helpful and so was the comment section. One suggestion, put a link to your website in the description field to make it easier to find out where to buy the cleaning kit. Thanks for a well made and designed product.

[@brandonharding1199]

I like how easily the guy takes the hose off the reservoir when mine it literally glued. I’ve already started to see the hose stretching at the connecting yet still can not get it apart.

[@carolinescott3888]

Mine too

[@Drinksfromtap]

Same, I just tried running hot water over it like one of the other posters suggested, still did not come off.

[@carolinescott3888]

@@Drinksfromtap I've managed to do it a couple of times now

[@Drinksfromtap]

@@carolinescott3888 hm, I wonder if I just need to use hotter water, I keep my hot water heater relatively low so maybe I’ll try heating some up in a pot so it’s hotter but still well under boiling.

[@carolinescott3888]

@@Drinksfromtap I just used hot tap water

[@samcrockett5644]

Yeah, but in real life how do you take the tubes apart?

[@ItsMe-dk2sy]

Yep. Sending mine back!

[@57precision]

For real. Mine didn't come with the hose threaded through the holder and I don't see how I'm going to take it apart without destroying the tubing.

[@Speed04GT]

Pull to you break it 🤷🏼‍♂️

[@mojoeks]

I came here for the same thing. I am past the return window so now I am stuck with a germ filled tube?

[@nicolasdemers8074]

Grab the tube tightly with one hand and the valve with the other Have both your hands as close as possible then twist it until it comes out

[@oharajoshua]

This my first hydration pack purchase. I am VERY pleased with the performance. I use it between 2-3 times a week. Great product.

[@ospreypacks]

Hi +Joshua O'Hara, we're so glad to hear that! Thanks for sharing your feedback!

[@will-jc5vo]

So happy I just got one of these I cant wait to hike

[@Jack3dBrett]

Looks like an awesome product.

[@TheAnalogRebellion]

Lots of subtle clever engineering packed into these things! Feels like futuristic alien technology compared to my old CamelBak. Great work as always.

[@kappleton3653]

Seriously I have to buy a bite cover? I looked on Amazon and it cost $6 to order one. It can't cost the company that much to includen it. Make the customer happy please.

[@ziploc53]

I have an older style 3L hydraulics with a screw cap. But these tips will help me clean mine.

[@veroniquediallo6055]

I had the same issue with disconnecting the hose from the bite valve and the bottom part (I don't know the technical term) As it turns out soaking both ends in warm to hot water (from the faucet, not boiling off the stove hot) for 5 mins or more loosens the grip (just work it a little) and you can detach the hose completely. The solution was shared here by Osprey, I was having issues and tried the suggestion and it worked!!

[@MrArod001]

This is what I need the tube is glued to the bottom attachment lol. Almost punched my own lights out trying to pull it off when my hand slipped

[@melissabeecher1769]

Love this bladder. It has kept my water cold somehow during long hot hikes. They might not be telling us of its secret reverse cooling mechanism. And I use vitamin c powder to clean it. Helps with the yellowing of the material.

[@angelak.french9340]

what do you mean by vitamin C powder? Mine has yellowed.

[@NathanaelCBR]

@@angelak.french9340 Probably ascorbic acid. You can get it in health food or agriculture shops.

[@katssketches1118]

Used it for the first time today, it was really great. Wish I'd cleaned it with the lemon first tho as it does taste like plastic

[@janros2217]

Just bought the 1.5 and this video was perfect! Now....headed to the Wind River!

[@ospreypacks]

Happy adventuring!

[@stevebeschakis9775]

I bought an Osprey hydration pack, and I'll probably give it away. It's heavy, overly-complicated, and loaded with tricky features that don't seem to work as well as intended. It seems like this pack was a test platform for a bunch of designers' experimental ideas, which is great if they work, but frustrating when they don't. I'll take it to the trail for testing, to see if it'll grow on me, but my first impression is that someone really over-thought this one.

[@timothyds7453]

Make sure to order a "quick release" kit if you want to remove the bladder without having to remove the entire tube since it doesn't come with the bladder by default; e.g. like with my new Raptor 14 bag.

[@RichardBuckerCodes]

I have several platypus and camelbak hydro-like bags. I simply do not like them. Depending on the size they reduce the overall pack volume forcing you to put gear in the external pockets. AND no matter what smartwater bottles are cheaper. *HOWEVER* There is a time and place for the osprey model. Sure they weigh just a little more with the ridged stiffener on the larger models but until you've experienced trying to insert into a partially full pak... The part about the sloshing and the other quick-connect seems counter intuitive. [a] having the tall quick-connect is cool because you do not have to stick you hand deep into the pack to make the connection. This is a stronger reason than "switching sides". [b] but the combination of features does not seem to support the "invert and suck the air to reduce sloshing" The prices are pretty good and on par with the competition. The other accessories also seem useful.

[@emraldeyz1]

The only improvement that I could suggest is some sort of locking mechanism that keeps the slide seal in place. If you accidentally grab that it can slide right off and dump the whole bag. Ask me how I know.

[@oc9438]

Thank you so much!

[@bobtiger5553]

Has anyone used their Osprey Four Season Insulation Kit and know if it really does work in winter climates like 20 - 10 degree farhrenheit?

[@reginamortem1336]

Come on guys, osprey is my favourite brand but it still disappoints me. The bite valve cover should come with it. And maybe the insulation should too because oz trail sells the bladder, cover and valve cover all in one. Step up your game here

[@ospreypacks]

Thanks for the feedback!

[@jackluke6209]

you guys thoughts of everything

[@yoyomastero]

Hi @ospreypacks ! I am in the process of purchasing the Talon 22 M/L 2017. I was thinking of buying the 3L hydration pack since the Talon comes with the hydration sleeve and all that. Could you please tell me which hydration pack would be suitable for me? Should I get the 3L? the 2.5L LT one? Thanks

[@ospreypacks]

Hello, the Talon 22 can fit either a 3L or 2.5L - it really depends on the length of your trip and if you prefer a rigid backing on your reservoir. The 3L is nice for longer days on the trail but the 2.5 is nice for lighter days. Cheers!

[@Spartan87667]

I’m here because I just bought a Raptor 10 hydropack and couldn’t figure out how to open the reservoir. Nice to have the interwebs to save the day 😅

[@teesea77]

Hey Osprey Team- could you please let me know what bladder sizes would fit into the Talon 11? Thanks

[@ospreypacks]

Hello! All of our reservoirs will fit in the Talon 11 - we recommend either the 2.5L or 3L options. Cheers!

[@mike.repucci]

Nice design. I too was concerned about forcing open the main fill compartment until I found the video. But I'm really stumped regarding the statement on the package: "Hose clip magnet attaches to included sternum strap magnet..." Nice idea, so, where is the "included" sternum strap magnet?

[@terrykorenowski2736]

Mike, you've probably figured it out by now, but the sternum strap magnet is attached to the hose clip magnet - you just need to separate them, and affix the sternum strap magnet to the sternum strap

[@ospreypacks]

Hi Mike! Sorry for the delay in reply. Which pack do you have? As Terry mentioned below, all of our hydration packs that come with a reservoir have the magnet included on the sternum strap for easy attachment. Otherwise, when you buy a reservoir, it comes with a sternum strap attachment that you can take on and off any pack you decide to use your reservoir with. You can also contact our warranty department to get a replacement magnet. Let us know if you have any other questions.

[@bruceschechter2754]

this took me forever to figure out thanks to this post I finally did! Directions could have been clearer on the osprey packaging...

[@joepearson279]

Hi Osprey, I've just bought the Radial 26. I was just wondering if I can add a reservoir into the laptop compartment? If so which size is the most appropriate? Thanks

[@ospreypacks]

Hi Joe, the Radial 26 was designed for bike commuting so the designers left a reservoir sleeve out. While you could easily fit a 3L in the back compartment, there is no hidden hole for the hose to connect through so you'd have to use the zipper to hold it in. This pack was designed more to hold water bottles but could potentially be rigged to fit a reservoir. Hope that helps!

[@daniellearmato845]

I can’t figure out how to get the bite valve cover on. Can anyone direct me to a source to help?

[@jnewman4033]

how do you remove the tube from the bag?

[@MegaGifton]

Can I use sodium percarbonate to clean my reservoir? Is that the active ingredient in the tablets? I have a whole jar of pure percarb.

[@beyeringly]

I’m having a hell of a time closing mine, then opening it. Clamp doesn’t seem to fit. Didn’t have this problem before.

[@connorsurgeon8976]

what size reservoir should I use in the daylite pack.

[@HabeasJ]

I have the three liter as well and was going to take it on an overnight trip but thought it was way too bloated to keep in a full pack. I ended up only filling it less than half way and went on. Should I be worried about it popping or anything? I wouldn't fill it over the fill line nor would overfill my pack

[@ospreypacks]

Hello! It is safe to fill it completely to the fill line and stuff in a full backpack. We do this regularly and have not had an issue with a reservoir popping or leaking due to it being too full :)

[@HabeasJ]

@@ospreypacks thank you. Love your products!

[@user-qp6vg9ho8u]

I’ve got the 2.5l version that came with the Raptor pack but I cannot work out how to remove the hose to clean it. Any ideas?? It’s driving me crazy

[@ospreypacks]

Hi! You'll need to pop it off the reservoir from the base. That way, you can access it for cleaning.

[@NikosAthanasiadis-xe5vb]

hey i just bought mine and after i fill it with water and i try the test for leakage by turning it upside down it leaks way too much....I have tried it many times and happens everytime.....should i return it back to store?

[@edwardpage9996]

On my osprey Katari 7 it shows it coming with a quick connect but when I received it didn't, should it come with one or not, thanks ?

[@ospreypacks]

Hi Edward, the Katari series should come with a 2.5L reservoir but it is up to the store whether it come in the quick connect version or not. If unused, you may be able to exchange yours for a quick connect if you call our customer service team. Thanks!

[@frankrunner2620]

What about using my hydration reservoir for beer? I like to drink a beer after running - when I'm not driving home. Being on the public transit system it becomes questionable as to whether or not drinking a beer constitutes a breach of the law, and hiding it in the reservoir is a prefect solution. I have thought about the fact that beer generates gas inside the reservoir, and that could cause it to burst - so I drink often enough to prevent the buildup of gas, and don't lean back on the reservoir while riding the train or bus. Should I avoid beer, or any other beverage that produces gases inside the reservoir?

[@kas9633]

Good question. But honestly the best option is just to mix fanta with vodka in a fanta bottle :) Proportions 50-50 of course :)

[@SciVias917]

My reservoir didn't come with quick connect and my tube came out! How do you fix that?? I can't get it back in. :(

[@ospreypacks]

Hi L! Sorry to hear about your tube coming out. Quick connect is a feature we have on some but not all of our reservoirs. Please contact our customer service team and they can help you get the tube back on or send out a replacement part. Their number is 866-284-7830. Thanks!

[@bgucoil]

Is it possible to totally disconnect the hose on both ends ? I'm afraid to use too much force on it, as it is hard to remove the end where it is attached to the reservoir

[@ospreypacks]

Hi Oz, you can completely disconnect the hose on both ends. The fitting is probably pretty tight near the bottom of the reservoir from the factory but if you run it under warm water to help loosen it and then apply a fair amount of force, it will come out. The fitting may stay in the hose when you pull it out but that also be removed once the hose is disconnected. Let us know if you're still having trouble and we can make further suggestions.

[@bgucoil]

Thank you so much for the detailed answer, Im asking it coz I want to clean it (it is new, but I want to let it rinse well) do u recommend to completely disconnect the hose in order to let it rinse ?

[@stevenforsberg2029]

Hi I have an osprey aether plus 70 L. Should I get the 2.5L red or the 3L blue? And whats the main difference?

[@TrekkingPals]

Main difference is capacity! I would choose 3L over 2.5

[@belengerkuma]

Question, can I put salty water to the bladder?

[@spencersmyth5221]

everyone having problems removing the hoses and or the grey disconnect piece from the hose, rather than just pulling on it, insert a thin metal pick (i used one end of swiss tweezers) to break the seal, and then start turning the grey plastic piece to get it out

[@SirJeanLucAsec]

That's what I was trying to figure out, thanks for the advice, I will give it a try

[@gravel_slope]

ware did the cleaning tablets go?

[@jamiephillips3725]

I recently bought the insulated hose, but I can not get the original hose to disconnect from the bottom. Is there a trick to getting off? I feel like I am going to rip the bag.

[@ospreypacks]

Hi Jamie, we actually recommend returning that insulted hose and purchasing the one from HydraPak instead: hydrapak.com/shop/accessories/arcticfusion-tube - that one is going to provide more insulation and will integrate with your current reservoir much better than our version. If you have any questions about how to install it, our CS team is happy to help. It may feel uncomfortable to pull the hose off but we promise it won't break! Their number is 866-284-7830. Thanks!

[@bernardmonbouquette7115]

I bought an Osprey 2.5 L Reservoir, made by HydraPak, for my new Osprey Sirrus 24 pack. There was a magnet attached to the hose, but no sternum strap magnet found in the package. I read the three comments but still cannot locate the "attached" sternum strap magnet. How can I obtain a replacement?

[@ospreypacks]

Hi! If you are located in the US, please reach out to our Customer Service team at 866-284-7830.

[@NT1V]

Where can we buy the bite valve cover? Can't seem to find it anywhere...

[@ospreypacks]

Hi Nhattan, thanks for your question! They will be available this fall near the end of August. Please call your local retailer when it gets closer to that time to make sure they are in stock.

[@patfleury3870]

I filled the bladder and started to put the slider on. It is on halfway now and I can't get it to slide off! Anybody know the trick?

[@katerinakubanova2849]

if I have Kyte 36 that has the compartment for the reservoir outside the main compartment of thw backpack (behind shoulders straps) should i place the front part of the reservoir (with the red handle) towards the shoulder straps or towards the main backpack compartment?

[@ospreypacks]

Hello Katerina, we recommend placing the reservoir with the front facing towards the shoulder straps for easy feeding of the hose through the loops on the straps. Cheers !

[@katerinakubanova2849]

Thanks! There's one more thing I coulnd't find anywhere...For how long it should stay in the freezer to get rid of the plastic taste and should I suck the excess air out of it?

[@ospreypacks]

If you use lemon juice or one of our cleaning tablets, you can fill the reservoir half full, slosh the solution around and let it fully freeze overnight. You can also freeze after each use to prevent any bacteria from growing and help the reservoir last longer. Lastly, there is generally no need to suck the excess air out but it could take an extra few seconds for water to reach up through the tube. Cheers!

[@iAudun]

Hey! For how long should it be in the freezer after it is filled with lemon juice and water and how much water should you put into it for this process for removing the hint of plastic taste?

[@ospreypacks]

Hi Audun, great question! We recommend filling it half full with water and lemon juice mixture, sloshing it around a bit and then letting it freeze all the way. Generally that takes a few hours so leaving it in overnight and letting it thaw the next morning works well.

[@jpaw1325]

How do you take the tube off?

[@carolinebarbeau2157]

Do I need to under fill the bladder if going to 14,000 feet from sea level?

[@ospreypacks]

Hi there! You do not need to under fill the bladder, just make sure you're not over filling it! :)

[@bobjohnson6131]

Uh.....I have a talon 22....not sure which pack to get. Should I just get the 3L to be safe?

[@ospreypacks]

Hi Bob, you can fit any of our reservoirs in you Talon 22. We'd recommend a 3L to be safe and it has nice hard backing so it fits and stays in your pack as you drink. Let us know what other questions you have!

[@realgoodartist]

Mine doesn’t come with the line in 2 places!

[@kaiviti2013]

Osprey need to put the instructions on opening the main compartment for filling on the packaging.

[@ospreypacks]

Thanks for that feedback! Our design team is constantly working on how to improve our packaging and this is a great suggestion. We know it is challenging to open our new reservoirs but don't be afriad to pull pretty hard the first time to break the seal.

[@tomcasarella6061]

the super magnetic mouthpiece holder is convenient, but if you use a compass you will be traveling in a circle ☺

[@matthewbucchi6127]

Tom Casarella thanks to you I now found out why I went down on the other side of a mountain with fog all over

[@s.d.r1062]

Dear Ospey Will the 3liter bladder fit in the Daylite ?

[@ianburlingame8658]

Yes it does

[@zbynekbart]

I have 2,5 l red version of the pack and I can't perform an open and close operation (1:20).

[@smarticle]

I have the same problem. The valve won't turn to fully open or close. Any suggestions anybody?

[@charliebuck8355]

I got new silicone nozzles, how do I get the red bit out of the old one?

[@Drinksfromtap]

I just pushed it out backwards, didn’t damage anything.

[@GorgiasRed]

It's silly that the bladder doesn't come with the dust cap for the mouth piece. What's that? Another tich of plastic. Also, the bladder is impossible to air dry without the hanger, which of course is another way Osprey is nickle and dollaring us to death.

[@ospreypacks]

Hello! Thanks for that feedback. Did you know you can also use a regular metal hanger to air dry or put your empty reservoir in the freezer until your next use? While we hope you use our accessories, there are other ways to clean your kit :)

[@problematique87]

Does anyone know if the 2.5L version of this would be compatible to fit the Talon 33 pack?

[@ospreypacks]

The 2.5L reservoir will fit! :)

[@problematique87]

@@ospreypacks perfect, thank you! My Talon 33 just arrived yesterday and I'm so excited to get back outdoors once lockdown is lifted! Thanks so much, Osprey 🖤

[@iannickCZ]

I still do not know how dry the bladder, the opening still keep closing and there is no way how keep sides not touching and dry all everywhere.

[@ospreypacks]

Hello, we recommend either putting a metal hanger in the bag to keep the sides separated or putting the reservoir in the freezer after each use. The cold will kill all of the bacteria that collects in there while also drying out the reservoir. If you still have questions, our CS team is happy to make some other recommendations. Their number is 866-284-7830.

[@normm]

I use kitchen tongs to hold mine open whilst drying ;)

[@chipflaming]

@@ospreypacks According to the Mighty Google, freezing does not kill bacteria, it only renders them inactive. Some biology labs store bacteria at temperatures far below what a home freezer can achieve. And it's not bacteria that causes mold, it's a fungus, which freezing in a home freezer probably doesn't kill either.

[@alek-by7rm]

Hey! What is the difference between the blue and red one? Which one is better?

[@ospreypacks]

Hi Alek! The blue ones have a hard backing on them while the red ones do not. That are both equally great but if you want a tad more stability when storing your reservoir in your bag, we'd recommend going with the blue version. Most of our packs fit a 3L but let us know if you have questions on a certain style.

[@alek-by7rm]

I want to buy one of 2.5 or 3 liters for my Osprey backpacks (Quasar, Stratos and Aether). Which model of the hydraulic pack is more suitable, taking into account that i will need it for backpacking and less running or cycling? I need something very durable that i can use for years.

[@ospreypacks]

We personally like the blue ones with the hard backing more as they are easier to get in and out of our backpacking bags so we'd recommend the 3L blue version in your case. Cheers!

[@alek-by7rm]

Thanks for your reply, i will buy one as soons as possible :)

[@josephanderson1253]

I just bought the 3 pack of new Silicone Nozzles for bite valve replacement. I can Not get the old leaky one off and can't fine a video on hoe to do it Please help

[@ospreypacks]

Hi Joseph, have you tried running the bit valve under hot water and pulling it apart? Sometimes that can help loosen the connection, but it will require some elbow grease. If that still does not work, please reach out to our CS team at 866-284-7830.

[@ospreypacks]

Hi Joseph, have you tried running the bit valve under hot water and pulling it apart? Sometimes that can help loosen the connection, but it will require some elbow grease. If that still does not work, please reach out to our CS team at 866-284-7830.

[@thebentzenable]

Hi Osprey 😀 My slide seal is so hard to slide that I feel that I am breaking the product apart. I can see that the dark grey plastic on the seal is white at the opening because it was stressed to hard 😊 Is this normal? I only used it 5 times and love it.

[@ospreypacks]

Hello! On occasion, those can be hard to open but should not turn white from being so stressed. Our customer service team can send you a new slider or provide some tips for helping it not get stuck. Looks like you may live in Europe so please see our International CS page for contact info: www.osprey.com/us/en/customer-support/international-customer-service-center - let us know if we can help with anything else!

[@atari_rx]

great product but comes with a lot of poor and lack of instructions. i just bought a 2.5 L pack but it does not have a backplate? so i have no idea when they say the new bags come with a backplate, it doesn't. also how does a company assume that its customers will know how to use the product with absolutely no instructions whatsoever? if it wasn't for KZbin, i wouldn't have known how to use the bite valve. my water wouldn't come out at first and i wonder why bags don't come with a standard cover on the bite valve like every other brand? i mean if I'm gonna spend $90 on a hydration bag, I'd at least expect a cover for the bite valve, it's just standard hygiene that should be included. i bought this because of the company's value in a lifetime warranty so hopefully it holds up.

[@ospreypacks]

Hello! Thanks for your feedback. The 2 and 3L non-LT reservoirs have the back plating and all of our hydration packs come with the 2.5L version. We state this on the hangtag and product pages and we apologize that was confusing for you. We made this video and link to it from the reservoir materials in hopes of making the opening process easier. With the slider piece, customers should not be afraid to rip the top open; sometimes it's easy and sometimes it requires some elbow grease. We also provide owners manuals on the website for each of our products with instructions on how to use them. This link is also on the tag for each product :) We hope you enjoy your new pack and if you need a repair, please reach out to our amazing customer service team!

[@2985728]

Same here.

[@charliewhiskey8440]

What's the difference LT and non-LT?

[@ospreypacks]

Hi Charlie, the LT means that those reservoirs are lighter and do not come with the hard backplate found on non-LT. Cheers!

[@2wheelsrbest327]

Interesting comments as I have just brought a 1.5 ltr and the disconnecting the quick connect to put the tube on the correct side required hot water poured over it to release it. Not impressed 😏

[@Kkorhetz]

But what's the magnet for?

[@Kkorhetz]

@@ospreypacks thank you! 😊

[@ka81alex]

Where to buy Bite Valve Cover (here it's on 1:30)? You don't even show it in your catalogue - www.ospreyeurope.com/gb_en/accessories

[@ospreypacks]

Hello O, the US got our new bite valve covers in this fall and Europe should have them too, they may just not be on the website. Please email [e-mail] to request one and they can get you set up. Thanks!

[@zane5598]

Could never get rid of the plastic taste, gone back to camelbak, shame because I really like my Osprey daysack.

[@rooted9287]

Why do you recommend not using bleach?

[@ospreypacks]

Hi Pedro, if not diluted and rinsed out properly, bleach can be very harmful to drink if any residue is left in the reservoir. Also, bleach may compromise the seams, making it harder for the reservoir to hold water. We recommend using lemon juice. You can find more cleaning tips here: www.osprey.com/us/en/fitting-learning/pack-care - Thanks!

[@frankrunner2620]

I have been using a diluted bleach solution for cleaning all of my other hydration reservoirs for years. I would pour in a capful of bleach into about 1 pint of water, slosh it around for 5-10 seconds, let it run through the hose, then shake out and let the bladder hang upside-down to dry out. It prevented the buildup of mold in the hose and fittings. I never used to rinse out until I was ready to use again, thinking that the water I used to rinse might cause mold to grow. After watching the video, I will be using lemon juice instead. Makes sense. Maybe use lemon juice in plain water to drink too - I have read that it helps with electrolytes.

[@SwiftEcstasy]

RAVE LIFE

[@robertdurnack78]

What if I used bleach. Some websites say to use bleach

[@ospreypacks]

We do not recommend cleaning with bleach. You can find more cleaning tips on our website!

[@susietopspin]

My bite valve does not lock.

[@ospreypacks]

Hello! Have you reached out to our customer service team about getting a replacement? All bite valves should lock and unlock easily :)

[@wesleydeitz4183]

Have to say I’m not impressed so far....how are you supposed to air dry this thing with nothing to prop and keep the opening propped?

[@ospreypacks]

We hear you! The cleaning kit was designed with the older reservoirs in mind. One tip we have is to put your reservoir in the freezer overnight to both dry it out and kill any bacteria before the next use. We hope that helps in the meantime!

[@susanannlee1]

I use a blow dryer on low, cold air. It works fine. I havent figured out drying the hose yet................

[@LostInDistance]

Great backpacks but when it comes to these Osprey bladders they’re an awful design. Ended up chucking mine and bought a 3ltr Camelbak bladder. Works and fits really well!

[@JL-lg9ys]

What happened to the good old model which only required one hand to fill. No dirty hand need to be around filling cap. The nice 360 degree mouth piece that turned off at 90 degree. Looks cheap, but still cost a lot. Price and design don't go together here. Sadly it looks more like a step backwards than an improvement.

[@boesboot]

My experionce with the 3L / Blue version: The Blue and Grey parts are hot-welded to the Bladder. This might result in leaks on the seam. My version was leaking from the start and I returned to my € 5 decathlon version. I have seen more productreviews about LEAKS with this version Not recommended.

[@trailladymtb7700]

good video, no instructions for anything. the quick connect kit had zero instructions as well, can't figure out why, and watched a guys youtube video to figure out how to open bladder.

[@ospreypacks]

Hello - thanks for that feedback. The reservoirs can be a little tricky to open but we're glad you figured it out. We have passed this on to our design team to hopefully fix with the update coming in a few seasons.

[@muhammadramdhani9940]

Can't claim guaranteed

[@ospreypacks]

Hi there. Sorry, can you please clarify your question? Are you asking about the All Mighty Guarantee?

[@muhammadramdhani9940]

@@ospreypacks yes, i ask about all mighty guarantee. My water bladder has leak. I don't know why, when i want use to hike, my daypack has been soaked😂 and my daypack is osprey escapist 32L. I want to claim guarantee about belt helmet. Cause have break:( can you tell me prosedur to claim guarantee? I buy my daypack and water bladder at Eiger.

[@ospreypacks]

@@muhammadramdhani9940 Can you please tell me which country you are located in? I'll give you the distributor's info. :)

[@muhammadramdhani9940]

@@ospreypacks my location in bogor, west java, Indonesia.

[@ospreypacks]

@@muhammadramdhani9940 Great. Here is the distributor info: Phone: [phone] Email: [e-mail]

[@mickchapman5483]

I bought my Osprey 3ltr Hydra pack on Osprey's reputation for making quality equipment. The Hydra pack shows every sign of quality but has a couple of very dumb features. Firstly the routing loops at the quick detachable connector are too small. There is no way to pass the disconnector through it, so one must fight with the bottom connector to change the tube from left to right hose feed. Secondly, Osprey evidently doesn't want you to use the Hydration system with another brand of pack. As the size of the opening to attach the hydration pack to the main pack, is too small, so the user has to come up with another method of attaching. We pay good money for quality gear and it is disappointing that small things like the above have not be thought through properly.

[@guy5330]

You can also easily remove the quick release to change the hose from side to side

[@ChristopherChilas]

@@guy5330 Easliy!? I feel like I'm going to rip it apart trying to remove the quick release!

[@tomjohanfillan8448]

This is so bad product that I will return it to the shop were I bought it. I bought Osprey hydraulics reservoar LT 1,5 l and the insulated delivery system. It was almost impossible to change from the standard tube to the insulated tube. In addition, the connection to the bladder was so loose that it is a great risk to pull out the tube from det bladder. I did this and the water flow out on my living room floor. There was no information on how to change tubings, or how to fasten the bladder to my Osprey Talon 11. I am fed up with this product...

[@sneakyray9160]

Too much hassle and maintenance, Mind as well just carry a water bottle

[@roloroko9523]

"Plastic like taste"... a little concerning for something that's supposed to be high quality and bpa/pvc free

[@marieforeman7584]

Worst bladder I've ever had. The product changes the taste of the water. I have followed all directions provided and it's made no difference. Very disappointing.

[@Pt-42]

Are you seriously selling the bite valve cover separately????! And it costs 40% of the whole reservoir??? SHAME

[@1956colinb]

The bite valve is rubbish, No instructions or anything, I’ve swapped it for a Camelback one, won’t be buying another Osprey bladder, the Camelback stuff is far simpler, easier to use and functions a lot better 👍

[@hameed]

You know your design is bad when you need a KZbin video to know how to open it

[@MyPat444]

Used 4 times... leaks! Way NOT to go, Osprey!

[@EssexLadOutdoors]

Plastic taste 👎 Should not have to freeze with lemon juice. I won’t be buying one.