Our cup VS their cup!!!

Our 3mm solvent cup drilled out VS a competitors solvent cup. What's inside ? Here's the true fact!

[@pennise]

Is the cup thicker so it can be tapped for attaching a drain tube with a quarter turn valve?

[@anthonydavis1545]

Good question. Not really, that function would be applied in the end cap, that's why they are 3/4" thick (instead of a thin wafer). The thickness of the cup bottom is too withstand the drilling process for larger drainage holes. Thin material will flex, heat up quickly, and lose its strength.

[@anthonydavis1545]

Indeed, it's 7mm thick on the bottom. But it's best to thread the end cap, not the cup.

[@TimKollat]

What would you suggest for me to drain my 450 bushwacker...I mean Bushmaster? I would like a tube large enough and cups with at least 0.460" hole to really get that fluid draining quick and quite

[@psteelman396]

I'd go with a more standard size, like the D cell sizes. That way you can buy cups/plugs/end caps/pre built monocores from other companies. Finally got my stamp and I started my mock up for my silencer build, this guy's tubes are NOT a standard size. 1.5" ID and I forget what the OD is. Any type of blast chamber space or monocore will have to be custom machined to fit this tube. Go standard D cell size in your preferred length and with the 3/4-16 threads and you shouldn't run into all of the problems that I have.

[@tommysellers5339]

Are you offering these cups for the 9-9-9 solvent trap. I have the 9-9-9- solvent trap and it works perfect. Can I ORDER these cups for my solvent trap that i already have, and how many cups would i need to order for the 9-9-9 solvent trap tube. Thanks

[@anthonydavis1545]

Great to hear Tommy! yes, the black slide cups will work with any filter tube that we have ever sold. You can get 7 in the 9" tube, then a few springs to compress them tightly. :)

[@tommysellers5339]

@@anthonydavis1545 thank you sir.

[@psteelman396]

Why is your size proprietary??? Almost no one else makes anything with the 1.5" internal size. I just got my tax stamp back and I've had your trap in my closet for over a year, I finally go to work on it and can't buy a premade monocle to go in it. I want to make a steel/titanium spacer to go in the blast chamber instead of those springs, and it looks like the only way I can accomplish that will be to buy 1.5" diameter tubing and cut it to length, may possibly have to turn it down on the lathe a few thousandths but I don't have a shop or access to a lathe...