"Thanks", one of the best break downs and explanations on youtube so far .
@ridgetoriveroutdoors3 жыл бұрын
englishgroup123, I appreciate that.
@kerrytodd37533 ай бұрын
Awesome video, just bought one on a two stroke Suzuki, it wouldn’t get out of its own way 😮 ordered new impeller and flange as the old ones were shot! Looked 3x worse than the used one you showed, this boat was straight from Montana to now South Georgia. Very strange smooth rocks caught in the pickup fins, nothing like them here…..thanks for the knowledge 👍
@ridgetoriveroutdoors3 ай бұрын
I am glad it helped. Amazing what new impeller and liner will do.
@TheSilverSurfisher Жыл бұрын
👏🏾👏🏾👏🏾Thanks! Great thorough Informative video!✊🏾👍🏾
@liggiwonka95393 ай бұрын
Great video thanks. Very informative
@xs-1b4156 ай бұрын
Great video. I just got my first jet and this really helped me get to know it a little better. Thanks!
@lukedejour2 жыл бұрын
Great video my jet just started to loose performance, so I am pretty sure a shim adjustment is needed. The business card trick is a great one, thanks for sharing!
@williamchandler24947 ай бұрын
Nicely done and explained. Thank you for sharing.
@kwally332 жыл бұрын
Thank you! Can you do a video on how sharpen an impeller? Maybe use an old one you got just for an example... Thank you!! Maybe another on how to change the shaft, bearings and maybe how adjust and re-shim one that's out of tolerance? I like the business card ideas!!
@ridgetoriveroutdoors2 жыл бұрын
I can work on that.
@kwally332 жыл бұрын
@@ridgetoriveroutdoors awesome! I think that will help alot of do it your selfer's.
@prometheusfallen Жыл бұрын
Very nice video! Gives even a totes n00b like me the feeling that I can do it. The main thing I was unsure of was the key way, but I think I got it now.
@ridgetoriveroutdoors Жыл бұрын
Thanks for watching
@kendicarlo62063 жыл бұрын
Good video just did this and gained 5-7 mph. I had 80 hours and ten years on my pump and just one shim gave me performance back
@ridgetoriveroutdoors3 жыл бұрын
That is awesome! I am glad this video helped.
@highcountry3603 жыл бұрын
Thank you, great video. One problem I had with greasing I used too big of a grease gun and the pressure blew out my seals. Now I use a small tube of lubriplate 630-AA and a screw on hand pump. Any tips on how low to mount your shoe below your boat and tips on a cavitation plate install?
@ridgetoriveroutdoors3 жыл бұрын
Correct. Grease guns have a lot of pressure and blow the seals. Cavitation is a trial situation. You have to make an adjustment and see what works for your boat. When the shoe is mounted and you can run in smooth water without cavitation, you should be good. Cavitation occurs most commonly in rough water. Jet pumps are not designed for rough water. Good luck.
@countryisrecordsangellosou7797 Жыл бұрын
What a great video Thank you!
@carsonstumpf91592 жыл бұрын
Hi I have an issue impeller. Is it normal to have a tiny bit of play in your impeller?
@ridgetoriveroutdoors2 жыл бұрын
You would have to explain in more detail what kind of play you have. Otherwise you can call me.
@zacharyclifton63153 жыл бұрын
What should I do if the grease doesn't pump through the tube when trying to flush the water out? Thanks
@ridgetoriveroutdoors3 жыл бұрын
You should talk to your mechanic. Sounds like you might have some bad seals. If this is the case, I would have a mechanic replace them.
@PICAFUMO6752 жыл бұрын
Great video!
@ridgetoriveroutdoors2 жыл бұрын
Thank You!
@ilovefriedrice98913 ай бұрын
lol i had to pause the video to see if it there were chickens in my neighborhood lol
@ridgetoriveroutdoors3 ай бұрын
😆
@kirknelson30202 жыл бұрын
Great video thanks!
@ridgetoriveroutdoors2 жыл бұрын
Thank you
@tegdejonge3 жыл бұрын
Mine has a key way notch. I hear some come with that. How do I remove?
@ridgetoriveroutdoors3 жыл бұрын
It should have a woodruff key. You can likely find a video that explains how to remove the woodruff key. If your in doubt, you should talk to your local mechanic.
@bradenherle8774 Жыл бұрын
What size of outboard? HP?
@ridgetoriveroutdoors Жыл бұрын
This is a 250hp.
@thelotec0073 жыл бұрын
I'm building a custom flat bottom. Just found a 55hp with jet...will it work brother
@ridgetoriveroutdoors3 жыл бұрын
I have no idea. It all depends on the weight of the boat, and how much weight is in the boat when you plan on using it. You should look at other boats similar to what you are building and see what they are running for power.
@fishnlift013 жыл бұрын
Thanks for the info, sir.
@foxgrove603 жыл бұрын
Very good info very good
@ademiryslacrispin273 жыл бұрын
Necesitamos en Perú jet oarturbo
@dustinclark81863 жыл бұрын
No grease. In there. Sand sticks in it. Only grease shaft and and bearing.
@tegdejonge3 жыл бұрын
My liner is Stuck to the foot
@ridgetoriveroutdoors3 жыл бұрын
You may need to see your mechanic if you cannot get it loose.
@Garminrules2 жыл бұрын
Why not use anti seize on threads and feeler gauge for exact measurement verses business card????
@ridgetoriveroutdoors2 жыл бұрын
The business card works. No need to be so precise.
@Garminrules2 жыл бұрын
@@ridgetoriveroutdoors thanks for the quick response.......I'm prop guy wanting to get another boat...a jet and trying to learn how it all works...your video was great! Thanks