Outfox | Making of Ocelote Monitor Hi-Fi Speaker

Making of Ocelote Monitor
Inspirado en la elegancia del felino endémico de México conocido por su belleza y color pardo, Ocelote Monitor es un altavoz de 2 vías y 100 watts. Su cajón y corneta; fabricados en madera sólida y triplay de abedul, albergan un woofer de 6 pulgadas cruzado con un driver de compresión en 1 pulgada. Este diseño combina calidad de audio excepcional con una construcción sólida y atención a los detalles, un accesorio ideal para los amantes de la música Hi-Fi.

[@hificonspiracy]

Wow. That planner sounds great in High Rez... 🤣

[@uruguay360]

Good job! >Best regards from Montevideo, Uruguay !!!

[@outfoxworks]

saludos desde mexico!

[@Papisara]

Joooooe McNally! En bocinas 😎🫡

[@MrMirosz]

Do you have a video of the Hi fi stand/rack? The one where the Technics receiver and the turntable are? Looks interesting.

[@outfoxworks]

I do, let me search for it and upload it, it has a cool joinery sistem, a bit ispired in japanese traditional woodworking, wedges and friction, it does have screws, it is designed as a flat pack furniture, fun to asamble at home

[@crazyprayingmantis5596]

King gizz, nice 👌

[@thomasschafer7268]

😅😅😅die sieht anders aus!

[@outfoxworks]

😎

[@mariocampos6508]

Do u have plans dimensions and crossovers plans

[@OLEGator-uj9mp]

Where is measurements?

[@MsCorbacho]

, sounded harsh , disconnected and without bass at all, Of course this is you tube , but if the micro is good I normally can distinguish a good sound , my headphones are pretty decent and smooth on top .

[@outfoxworks]

it is because of the amp, was a bit old, needed some cleaning, now it sounds great

[@coversamz4872]

De 100 watts no son y el amplificador tampoco pero el amplificador es muy potente para esos woofers, de hecho los vi que estan a punto de salirse, y no creo que el amplificador este al maximo lo que significa que es muy potente para esas cajas, como proyecto esta pero para un sistema de menor potencia, para ese amplificador altavoces mas grandes, saludos.

[@outfoxworks]

si son de 100 watts, y el amplificador es de 75 watts por canal, el tema de que los drivers se muevan tanto se debe a una falla en la tornamesa, justo se meten vibraciones de mas, busco solucion! saludos

[@yuriwalter385]

Olá, amigo! Isso acontece porquê alguma vibração produzida pela caixa está sendo captada pela cápsula do toca discos, criando um loop. Você precisa de um filtro subsônico no pré amplificador e de uma base de isolamento no toca discos. Lindas caixas e suportes. Gostei muito de como fez a corneta. Parabéns!

[@thomasschafer7268]

Das horn könnte noch eine Nummer größer sein. Genau wie der Tieftöner. Sieht eher aus wie ein mitteltöner

[@ronmoes42]

THose speaker move too much, they look flubbery...It must be either the quality of the speaker or the air in the speaker cabinet, which needs to provide some resistance

[@bitmanev4331]

Rumble from the turntable?

[@user-qy2pv1uq8j]

Might wanna find the speakers drivers ( ebp ) might be better with closed box if lower than 50

[@ronmoes42]

@@user-qy2pv1uq8j My 6 inch KRK V6's have a bass port on the front side, but it is a separate chamber, inside the cabinet there is are hole(s) or some air to escape, so the bass reflex effect is noticable, beside this moving of air it is imo better to have '' A'' bass hole on the frontside instead of the backside like my old 4 inch Mackies which sounded very bass heavy and not flat at all....When a speak sounds flat, you can then shape the sound yourself with an Grahpical Equilizer....99% of the consumer speakers have a curve stright from the factory and then it is hard to correct for it.

[@outfoxworks]

@@bitmanev4331 it does have a lot of motion and it comes from the turntable, any solutions? when it plays streamed music they dont move at all

[@outfoxworks]

@@user-qy2pv1uq8j thanks!