Big Delivery At The Sawmill Today

Walnut Bowl Blanks: www.outofthewo...
Oxygen Absorbers Mentioned in video: amzn.to/3CJl1LH
Join the OTW Patreon Tribe: https: / outofthewoods
Out Of The Woods Merch: bit.ly/3V3e9ik
Mr KATO Hoodie: farmfocused.co...
Follow me on Facebook bit.ly/420uaK7
Follow me on Instagram: bit.ly/41V8jnm
Contact Joe Maine for Silver Tip Blades: 229-563-1172
Get your anchor seal here: amzn.to/48kuh2U
Masonry Brush for anchor seal : amzn.to/42xTWDG
Mail Address:
P.O.Box 1209
Kingsport TN 37662
List of tools commonly used at my sawmill:
Logrite Cant Hook: amzn.to/48qjKEo
Logrite Hookaroon: amzn.to/48pO69Y
Anchorseal: amzn.to/48qKtk3
A Must Have Tape Holster: amzn.to/3LyLmxe
My Fav Measuring Tape: amzn.to/3ZrA4Rk
Moisture Meter: amzn.to/3LAa8xf
Oil Can for ATF Fluid: amzn.to/3Px1Mrn
Level for bed rails: amzn.to/3Zxadr1
Framing Square: amzn.to/3ZrqYnq
Nail Puller: amzn.to/3EO0Aur
Puller Used I use: amzn.to/3XI9Dpt
Buy this and thank me later: amzn.to/42jMdHD
Our Online Store: www.outofthewo...
Woodmizer: www.woodmizer.com
TYM Tractors: tym.world
KATO: katoces.com
Nyle dry kilns www.nyle.com/k...
Sawmill Used: Wood-Mizer LT70 Super Wide
www.woodmizer.com
Video Tip Jar Paypal: [e-mail]
Amazon Sawmill Store: www.amazon.com...
Business Inquiries: [e-mail]
www.outofthewoodsforestry.com

[@OutoftheWoods0623]

Walnut Bowl Blanks: www.outofthewoodsforestry.com/shop#google_vignette Oxygen Absorbers Mentioned in video: amzn.to/3CJl1LH Join the OTW Patreon Tribe: https:www.patreon.com/outofthewoods

[@frankfarrjr8825]

How did Mr. Earl the rooster taste?

[@frankfarrjr8825]

as soon as I asked about Mr. Earl, he crowed on the video

[@garybeasley4885]

Ive done several black walnut bowls with sapwood and that makes an attractive feature. What would be defects for flat lumber often is desirable for bowl turning.

[@RRRIBEYE]

Hey Nathan - can you please do a full video of just working in the woodshop?! That is so amazing, watching you change that dried lumber into final product! I'd love to see you make flooring too! Love that little stand-on skid steer too! Y'all take care now!

[@MartyHenderson-ie9sp]

Nathan I appreciate you letting me know about those moisture traps. I bought several last year because of you. They have worked awesome in all of my tool chests and I have 4 of them. They keep the moisture off of all of my hand tools. Enjoyed the video my friend. Take care.

[@FredD63]

Good looking walnut Nathan…. Last week I went to the sawmill and bought some 4 x 6 Poplar beams and I bought some black walnut as well to make an entertainment stand out of the black walnut.. as I was driving home and pulled into my business parking lot. A sheriff deputy followed me through the gate. He wanted to know what the wood was and then he informed me that somebody has been stealing walnut trees in the area, and wanted to know where I got the wood from. I don’t know how people get away with stealing a tree and not being seen, but I guess it’s happened….. stay Safe 🇺🇸👊🏼👊🏼✌🏼🔨🪚

[@Lee-qp6gf]

On the checked ends cut them 3x3x11" for pepper and salt mill blanks.....No waist. I make a lot of them and hard to find 3" timber.

[@meehd01]

We stock 3"x3" Eastern Red Cedar here at Kinta Sawmill.

[@ivank2139]

The end piece on your tape measure is designed to slip the width of the tab feature. it is so you get accurate measurement if you push or pull on the little tab for your measurement.

[@OutoftheWoods0623]

I know that this one has been stretched too far which is why I pointed that out, thanks for watching

[@martineastburn3679]

56 years or so I turned a walnut picture frame. My wife sewed a picture on nice cloth, and I mounted it in. Therefore, some thin or narrow might be used for other objects like frames or armchair parts. Fancy turners use epoxy, colored and turned on a lathe makes a strong blank and maybe a beautiful Drink holder protected by epoxy.

[@Joshua_Jericho]

I need a shirt or hoodie that says “You guys hang in there.” I smile every time you say that 😂 Awesome video, blessings from Kentucky!

[@OutoftheWoods0623]

I might just have to make a few for the shop. 😉

[@floraandflannel]

That there’s a fine idea

[@MrDrewmcdonald]

I'd buy one.

[@EricinAuburnCa]

Hello Nathan - My wife and kids love it when the "hatefulest cat on youtube" makes an appearance but since you moved to the new building her screen time has taken a hit. They would love to see her when you are up around the house. Big hello to Bruno too.

[@carolineb3527]

Hey, Nathan... just so you know, I'm getting a bowl! @FRBPturning is making one for me out of the last set of Black Walnut blanks you sold - the blanks arrived with him last week and we're both pretty excited about the project. I don't know if you ever wonder where the wood you cut ends up but now some is coming to England!

[@OutoftheWoods0623]

thats awesome, didn't know that

[@BradleyBellwether-oy2qi]

@4:09 when the rooster crowed, the closed caption said, "[music]" ...I agree! 😂

[@midwayfarms]

Great video I love watching Walnut being sawed God bless

[@OutoftheWoods0623]

Thanks 👍

[@anthonycrumb9810]

- I like the new legs you have for your exit roller table, much more sturdy than the sawhorses. - "I got allot stuff on my list" made me laugh

[@OutoftheWoods0623]

Yeah they're much better. 👍

[@dmorgan28]

Nathan you do such a great job sawing lumber. The grain in that wood is beautiful. Cool video 👍❤️

[@OutoftheWoods0623]

Thanks, I appreciate it 👍

[@haggetthill]

I have those same absorbers in my gun safe...works great.

[@OutoftheWoods0623]

I bet they do!

[@bobstep720]

You are like an encyclopedia when it comes to sawing.👍

[@hasletjoe5984]

Love to see how all this comes together. Fascinating details behind the scene. About time for a trip through time (Bruno's Clocks). Thank you, stay safe and keep on sawing!

[@OutoftheWoods0623]

Great idea!

[@randydobson1863]

Hello Nathan & it's is Randy and i like yours video is Cool & Thanks Nathan & Friends Randy

[@refurbansuburban]

Another interesting video. Thanks for all of the great editing! Best of luck on your bowl blank sales, that is some really fine Walnut. Blessings on you and your family, as always.

[@donaldadams5342]

Another great, informative video Nathan. I agree that it would be good to get some lights down into the barn. Thanks for sharing. Cheers, Don from South Australia.

[@OutoftheWoods0623]

Thanks for watching Don!

[@olddawgdreaming5715]

Good looking walnut log that you milled down Nathan, glad you got some good wood out of that on the half's milling. Stay safe around there and keep up the great work and videos. Fred and family.

[@OutoftheWoods0623]

thanks Fred,

[@richardbritton5280]

nice Job Norm ty God Bless

[@toddpacheco4748]

Nathan,that walnut 🪵 was amazing looking 👀 😮😊❤

[@OutoftheWoods0623]

Thanks

[@rogercleveland9776]

You can make some spindle blanks out of the split ends of that walnut.

[@clarenceburton9654]

You can put some c a into the checking and still get a good bowl blank and it would only add character to them, some turner’s will like it !!

[@thorzyan]

Agreed. A lot of what he considers scrap wood is perfect for the epoxy resin crowd.

[@harrykeel8557]

That walnut is very pretty.

[@OutoftheWoods0623]

Agreed 👍

[@lonegunwomen]

Enjoyed the video Nathan, not seen Bruno for a time hope the little guy is doing well. 💖

[@OutoftheWoods0623]

doing well

[@britonmooney7198]

Thanks Nathan! Enjoy your weekend sir!

[@OutoftheWoods0623]

Thanks, you too!

[@raccoonlover9640]

if I lived in your neck of the woods I would love to come do work for you keeping the sawmill/shop area cleaned and organize the logs and learn other things I've always wanted to be out in the country just like my queen in oklahoma thanks for the great content great educational and learning experience. also how did you get into the wood cutting business.

[@AndruwsLumber]

Hey Nathen those looked like some really nice logs you got in Fun sawing

[@OutoftheWoods0623]

@@AndruwsLumber yes sir. Not a bad haul

[@keithprinn720]

Videos cost time and stacks of money in cameras, mikes and batteries that most dont see or understand. Greatly appreciate your efforts.

[@OutoftheWoods0623]

You get it.👍👍👍

[@davidpoll220]

Just ordered a bowl blank. Looking forward to making expensive sawdust with some nice wood. Thanks

[@OutoftheWoods0623]

saw that, thank you very much!

[@lastplacetrophy3821]

I couldn't stand the rattling of the blade doors on my super 70, so I use a couple tarp straps across the top corners of the doors and it significantly cuts down on that rattle!

[@frankkirby5763]

I believe that the WM70 is the best sawmill out there. Well worth the investment. Great video. Best wishes and blessings.

[@OutoftheWoods0623]

Agreed

[@steveshoemaker6347]

Thank you Nathan...... Old Shoe🇺🇸

[@Diggar72]

Just from a wood turning perspective where you had those checks you could also sale the splits because I personally would use those for those for peppermills, pen blanks, wands and several other things. Just throwing that out there in case you didn't think about it or know.

[@OutoftheWoods0623]

Thanks 🙏

[@yoosrid]

Cool

[@BartWalker-h9w]

Great video, thank you for sharing

[@MichaelJohnson-jt5cu]

You should set your pallets on risers to reduce bending over to stack your cut boards. You only have (1) body you need to do as much as possible to reduce the physical strain on your body while running a sawmill.

[@OutoftheWoods0623]

Thanks for the tip, I'll give that a try.

[@erinmcgrathejm4985]

Wondering if you have an actual physical list of projects to do at the farm. That must be one long list! Hey! Just the realities of a going farm concern.

[@fondadeen1164]

Good morning Nathan

[@OutoftheWoods0623]

hi

[@rogerworkman5813]

I like your music, and who was the singer in the past?

[@raccoonlover9640]

hey out of the woods I really enjoy watching your videos/content I was wondering if you ever considered metal pallets or wooden pallets to keep the logs off the ground and more organized until your able to get them into the sawmill to cut them and also how often do you get your own logs that aren't customers that you can cut use and or sell for yourself.

[@NorthernMichiganSaweyer]

Use a caliber that’s what I use at the mill learned that from a old time sawyer

[@brucebello2049]

Getting very close to the two hundred thousand mark!

[@davidhuffine5084]

Your shiplath looks nice . SEEYA

[@ronnielloyd4514]

Never not anything to do. Sawmill seems to be 24-7.

[@OutoftheWoods0623]

no doubt

[@johnzink3309]

Thx

[@timhatch5909]

Your Wood- Mizer saw looks so clean and shiny lately, do you polish it up, is this camera so much better, or does the company come in and clean and shine it to look so good on your videos!

[@OutoftheWoods0623]

I keep it clean.

[@stanwooddave9758]

A BIG HELLO to Bruno, from the Pacific Northwest, Washington State, 50 miles north of the *SAN-FRAN-FREAK-O* of the north, formerly known as Seattle. I'm not a wood worker (Welder /Steel Fabricator, CAD Designer) but that Black Walnut looks awesome. You Take care Nathan. Thanks for sharing.

[@OutoftheWoods0623]

thanks

[@oldad6207]

Mornin'!

[@OutoftheWoods0623]

hello there,

[@texasjetman]

Good morning from Texas. I’m a little behind on my Patreon notification

[@OutoftheWoods0623]

crap, I was wondering if you saw it or not,

[@2naturesownplace]

Now the weekend begins proper

[@OutoftheWoods0623]

something to take your mind off all the bad news, plenty of it going around lately

[@2naturesownplace]

​@@OutoftheWoods0623 something I've been meaning to share from my area. For the past month I've been getting cull scraps from local place it's being processed in traditional hardwood flooring but with black walnut. Will you use my wood oven and wood furnace. So far I've hauled 320 ft loads of these scraps. Lotta $$$$$ paid out this year for someone.

[@texasjetman]

Absolutely losing three aircraft with souls on board in a few days so great tragedy

[@russmarchand3962]

Nathan. PLEASE lay your wood planes on their side. It does not matter if you have these fancy moisture absorbers. Moisture WILL collect in the pads of your shelves and rust will collect on the plane blades. Rust and sharp do not add up.

[@09FLTRMM77]

MM77 Approved 👍🏼 👍🏼

[@OutoftheWoods0623]

You bet! 👍

[@Lglenn4146]

Would it be possible to cut 3x3x8,10,12” blanks from the sides of the pith cut. They would sell just as fast and maybe you wouldn’t have to make firewood of it. JMO

[@A..n..d..y]

Nice to see the mp260 getting some use. Any update on the conveyor? I’m interested to see if it gets in the way.

[@OutoftheWoods0623]

still waiting, shouldn't be too much longer

[@Rysaber]

Good afternoon, Nathan. I know in a past video you said what your hearing protection is. I am unable to find them. Could you either post what they are or a link to them?

[@SotTreeService]

is 300 a thousand a good price for spruce logs. im in the maine area

[@Joe-cp2db]

I always thought how you guys retired from your jobs

[@jill-ti7oe]

😄👍

[@MyDogmatix]

Hey boss, sorry to bother you, but I gotta ask. With your business seeming pretty successful, is this something you find profitable enough to do, if KZbin was not a part of the day-to-day? Canadian carpenter here. Btw, love your products and all the education you give. Plus your taste in music is awesome. I’d throw a couple bux for your playlist. ❤from 🇨🇦 too bad about this international sillyness happening. Sorry if anything we do becomes an issue for you and the other small guys. Take care eh!

[@robert.brokaw3829]

Hey Nathan, a question - when you go halves on a log do you normally keep the off cuts or do they go to the customer to do with what they want - just asking. Stay safe.

[@OutoftheWoods0623]

Either way 👍👍

[@MrDrewmcdonald]

Hey Nathan, I'm in the market for noise canceling earbuds for my shop. What brand and model are you using?

[@danmaciosekmaciosek6166]

What is the status on your sawdust conveyor? Curious to see it

[@OutoftheWoods0623]

hope to have it here soon, it is being built in Indy,

[@whatdoyouthinktodd]

ISO headphones with audio. The audio only goes to 84 decimals. That is because anything higher than 84 decibels causes hearing loss. So if your earbuds are playing louder than 84 decibels you're causing hearing loss. Then it's not hearing protection.

[@OutoftheWoods0623]

@@whatdoyouthinktodd I don’t play anything on them when running equipment that would defeat the purpose

[@bobwollard9105]

Nathan, it's really strange how cameras can distort the appearance of things. Those boards really do appear thicker than four quarters on camera. The camera lenses also make long, straight boards look curved. But we know they are straight.

[@AaronTurnwald]

When you saw lumber for someone and give them a bdft price, do you measure their log bdft or after you saw the log do you measure the lumber bdft you ended up with and charge them that bdft?

[@OutoftheWoods0623]

Usually the log size

[@billupstateny9151]

Is anchor seal weather sensitive?

[@OutoftheWoods0623]

it is not,

[@cjkelly3691]

Check the flag. Stars to the left if you please

[@UncleMelB]

Where’s the meanest cat on KZbin been lately? And that rooster, he still around?

[@johnclark5153]

4:05 rooster

[@jamesmitchell5667]

Do bowl blanks have to be kill dried

[@OutoftheWoods0623]

No

[@danfraser7479]

when do plan onn getting farm animals?

[@Mr.mermelman]

Bowl or bow blank ?

[@johnclark5153]

Bowl. Have a blessed day.

[@Mr.mermelman]

Oh okay, that makes sense thanks

[@MatthewFrey-kc7vf]

I was the guilty whiner about the hearing aides. Speaking of hearing I really enjoy the song you played at the beginning of the video. In the past I have listened to more selections from the artist. However I erased the bookmark I had. If you wouldnt mind what is the artists name? Thanks in advance.

[@Dadas0560]

C'mon, we know it costs you a good dinner or beer from time to time!

[@OutoftheWoods0623]

👍😂

[@Dadas0560]

LOL, Nathan can speak Japanese, now! And 8 more languages...

[@OutoftheWoods0623]

I've been taking night classes

[@clarencetrice4442]

😊😊HI N U should have a push broom 2 get dirt and mud off the logs it would help alot and make quicker 2 do so 😊😊 because dirt and mud pulls the blade and a chainsaw chain ⛓️ 😮 is the same way 😊😊 OMG 2 2 2O25

[@OutoftheWoods0623]

my sawmill has a debarker

[@ronthacker211]

if Four Quarter is 1-1/8", then why not just call it 9/8?

[@boooshes]

Because it is rough sawn so that when planed, it will be a full inch, 4/4

[@Lglenn4146]

The last cant contained the pith. Those bowl blanks will not be good for turning. I would cut the pith out and cut the remainder into 3x3 blanks 8, 10, or 12” in length that would make great pepper mills, ect. Pith in a bowl blank is no, no. Just saying. $52 for a blank containing pith….no

[@OutoftheWoods0623]

I stated in the video the pith would not be in the blanks and showed that also, thanks for watching

[@billupstateny9151]

Have the flag 👮 police shown up @ the wood shop ❓ Actually, all those silly comments do help drive the algorithm toward the channel, all is not wasted. The flag orientation has not yet changed, difficult to bully Nathan 🇺🇸🗽🙏👌

[@OutoftheWoods0623]

I got more emails about it than I could reply 2,

[@Wineman-g5v]

Hey what about your forge you never say anything about it.

[@terrymillard9255]

Never did like working with walnut its pretty but very splintery and it stinks

[@jamessemple194]

Mr Elliot, sir, should you not be wearing a dust mask with all that sawdust flying around?

[@donaldhanger9807]

Will the bags work in a gun safe!

[@OutoftheWoods0623]

yes, I have them in mine

[@ghislaincampeau2106]

Could you make a video saying how much money pattryon vs KZbin on percentage… you don’t have to say the real amount….

[@gnewman18]

OFF TOPIC… Nathan, have you thought about a wood gasification unit to run a generator? Like kzbin.info/www/bejne/fpnRo35-e511jbcsi=qC6fxUhb8T9DMM4V ?

[@clarencetrice4442]

😊😊 HI N now finally the days are getting longer again it's about time ⏲️ 😊 that it does so I looked yesterday evening and in the western sky after 615 PM it was still day light there I still can remember it wouldn't get dark until 1O PM at night now thats been many moons and years ago it's a shame it's not like that anymore 😊😊 OMG 2 2 2O25