Overclockersclub reviews the RLC-511W 5MP WiFi camera from Reolink.

[@skk3940]

If you want to capture license plates at night you can do this via the Reolink Desktop program. You go into advanced settings and set the shutter to 1ms and the "gain " to 40. Leave the IR light on. Everything will turn black. But at night, if a car passes, the bright headlights will not glare. And the reflective face of the plate will let you see the plate! 70% for me it works well. I set to 4x optical zoom and I can see license plates most of the time at night. Now in the daytime, at this setting, video is black and white but still very clear so I leave it. I have three Reolink Cameras. One 511w and two C2 Pros, which I place inside facing the window looking outside. Now for the C2 Pro indoor cameras, I leave it in color mode, even at night. This way I can see the color of vehicles and there is less motion blur, compared to leaving it in black and white.

[@jesussanchez5342]

Thanks

[@latrace1986]

great tips, thank you!

[@mrmarcus6138]

What exactly is the SD card for if you have an nvr, Also can the cameras be connected to a power outlet and that's it or do I need to use another cable I see your talking about a little cable and that you gonna need a longer one??? I need to buy at reolink 8 channel with NVR,But I don't want wires going all the way back to the nvr from 8 diff places 😫... Nice video and thank you for your time I'll be awaiting a response... 🤙😎💯

[@overclockersclub]

The SD card would be used if you don't have an NVR. I don't have one of their NVRs yet (I will soon), so I can't speak on the functionality, but usually you would run ethernet cables from your IP cameras back to the NVR, however some do have WiFi capabilities too. Since this 511W is not a PoE (Power over Ethernet) camera, you will always need the power adapter, but you can use either WiFi or ethernet to access the camera. Running all the cables can be a real pain, but you will always get the best connection / most consistent quality that way.

[@mrmarcus6138]

Can I get 8 of those and hook them up to a reolink nvr..? I think that I can if so how does the controls on the phone work If you have it hooked up to one nvr and you snap a shot or record live motion on your phone does it record to the SD card only because the nvr would be set on 24 hours surveillance, ill be waiting for your response thanks 👍

[@t.p.2305]

Update 2021-01-18: Camera requires newest firmware, otherwise no connection to WiFi after power loss. I was initially disappointed. Now, it is working. Good resolution and picture of the camera.

[@supernova655]

is this true ?

[@t.p.2305]

@@supernova655 even though settings saved, it will connect only if Ethernet is plugged in. Then Ethernet can be removed. But now, of course, outside I want the camera to connect again via Wi-Fi according to the settings. This does not happen. The point is, that once configured, I want a device that connects to the Wi-Fi by itself without the need to plug in an Ethernet cable. Apparently others have same problems. I think little firmware updated would do it.

[@supernova655]

@@t.p.2305 I was in doubt... To buy this or Foscam FI9928p Ptz WiFi 2mp STSRVIS 4x.... Or another Chinese PTZ cam with 20x zoom and 5mp...

[@t.p.2305]

@@supernova655 The picture quality of this is good. Only the Wi-Fi. In fact, under FAQ and manual / support as I recall they mention that ethernet is required to connect to Wi-Fi, after that ethernet can be unplugged. But after power loss the connection doesn't get established. For ethernet operation only I think it is a good device.

[@supernova655]

@@t.p.2305 But this will be a problem because I want to install in another location and operate from my home - so if disconnects will not be easy...for that I wanted WiFi cam in case of power loss will reconnect back alone

[@walterdavies6434]

we want to see night vision

[@rswow]

It shrinks people (& the entire scene). Makes people appear shorter than they really are. I got another brand camera where people look fine in it. So, what am I doing wrong? Should I send back the camera? Can't stand the vertical shrinkage.

[@Random_How-tos]

Are we able to continuously record video onto the SD card.

[@Okie-Tom]

I have two of there. My problem is one if them has a spot of something internally on the lens. How does a person remove the lens for cleaning on the inside? Thanks

[@iaguilera67]

Can you have multiple cameras to view on the app? and how many people can view events from their own phone?

[@bbogdanmircea]

Nice that it has Zoom 4X, Pity there is no Speaker for Bi Audio function. Does it have ONVIF so you can record on a normal DVR? I have a HIKVISION 7204. Just received an offer for 80 EUROS for it, is this a good price.

[@mrmarcus6138]

Would you say its an upgrade from the 411w cams...thanks...

[@overclockersclub]

Absolutely!

[@brentkasl6510]

Would you consider this an upgrade from the Lumas?

[@paulcaldwell913]

To give perspective, how far away is the shed visible in the zoom test? Also, you mentioned using these with a NAS. If connecting to a NAS do you still have to set it up with or use the Reolink App? I was looking to use a Synology NAS. Thanks.

[@overclockersclub]

The shed is about 85 feet away from the camera. On my Terra Master NAS, there is an FTP setting that needs to be configured and then on the Reolink app you enable FTP. You can do it from the PC client software too. It took me a few tries to get it right, but it works well. I would think that Synology uses a similar method for FTP operation. If you don't set up a recording schedule and go with 24/7, be ready to store a lot of video clips.

[@mikebirminghamnz]

Look solid and built to last. Not like a lot of the newer plastic ones.

[@Eli.I.Newman]

Great review! Can I use it with the same app I use for my Argus 2 and watch both from the same screen?

[@overclockersclub]

Yes, the Reolink app for your smart phone will allow you to view all of your Reolink cameras.

[@mrmarcus6138]

Is jennov 8 ch nvr with 5mp cameras the same as reolink 8 ch 5mp cameras..??they both have the same features but the pr of reolink is double ,but I want to invest in the better one,pr don't matter ..which is better ..again thanks...

[@Oldgamingfart]

I have two of these, and although they are OK in daylight, they false-trigger a lot with their own infrared (especially fog and rain which drives them crazy!), so perhaps best to use an externally-mounted IR floodlight a little away from the camera. This may also solve any issues with spider webs. The coverage isn't fantastic due to the nature of 5GHz WiFi, so you might need a range extender for reliable streaming. Left to its own devices with an SD card it's fine, though. And at least there's the PoE option to fall back on..

[@tjCooper88]

Can you do continuous recording instead of just motion events?

[@flyingwithbrian3287]

Yes

[@neilm9400]

Thanks for the video. I was looking at buying one for my Synology Surveillance station, since I gather it supports Onvif. I just need to work out the best way to provide power to the camera(s), since I reckon I need about three.

[@overclockersclub]

Yes, power can be a problem but you might consider POE (power over Ethernet) cameras if that is an option.

[@Jamestfarrell]

Without a solar charging capability these are going to need a looooong power cord. How did Reolink drop the ball on the 5ghz/solar powered cameras?

[@annashum9105]

I just received this camera and was a little confused about all the functions and setup. This video was very thorough and helpful!

[@macster1457]

nice video quality, but by the time it zooms and focuses, the thief is GONE!

[@walterdavies6434]

with this model can i use cloud and save my videos? what file extension are these videos saved ? thx

[@walterdavies6434]

is this spotlight or infared? can disable spotlight?

[@overclockersclub]

No spotlight. Only infrared for night vision.

[@mindgrind5968]

Does anybody know if this supports RTSP?

[@erdejo01]

Does the camera start recording prior to or after the trigger event? So, basically, does it record a few seconds before motion (pre-record)? Or is there a delay, which could cause the recording to miss the actual event (depending how long that is in the fov...)?

[@AlphaGeekgirl]

There is a Prerecord Check this other video kzbin.info/www/bejne/r6jUXmOfYs-Mg7M

[@richardnixon3722]

Does this have 247 recording?

[@dibrentley7915]

The most helpful thing for me was put an app on your phone and see where the wifi goes.

[@keninmo]

Will this camera work on a nvr? If so, will it work on any Reolink nvr? I'd like to set at least 4 of these up if possible.

[@Oldgamingfart]

PoE cameras usually work better with NVR's, so perhaps consider the standard 511. Alternatively, you could connect them all up to a PoE network switch and then Ethernet over to your main internet hub/ router, then simply place SD cards in all the cameras and use the phone app and/ or desktop client to view saved events/ live stream. No need for an NVR, then.

[@keninmo]

@@Oldgamingfart Thank you!

[@gifted6305]

Can you leave a link to the SD card I need their is several of them out their, i have yet to purchase this camera which will be soon thank you.

[@overclockersclub]

www.amazon.com/gp/product/B07R9WN5M6/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

[@gifted6305]

OverclockersClub thank you.

[@efmarosario4953]

Do you think this can work with a solar panel?

[@overclockersclub]

No. Only the battery cameras work with solar panels...

[@efmarosario4953]

Thank you for your quick response. If I didn’t have a power outlet, can this be powered through PoE instead to an NVR or Router/Satellite?

[@overclockersclub]

@@efmarosario4953 The "W" in the 511W means wifi, so this model must be powered with an AC adapter, but there is a PoE version that will work as you suggest. It is just the 511 with no W.

[@efmarosario4953]

Gotcha. Thanks for the clarification. I actually just checked out the RLC-511WA and if I’m not mistaken it has both WiFi and PoE with Artificial Intelligence.

[@emiliajesion8550]

Nie mogę skonfigurować z aplikacja ciągle błąd