Overclocking a Ryzen 5 3600 on the MSI X570 Tomahawk // should apply to most MSI motherboards

Mistake in the video! The power readings on the mobo are fine I just didn't look at all the sensor readings in HWinfo properly.
My Patreon: www.patreon.com/buildzoid
Teespring: teespring.com/stores/actually-hardcore-overclocking
The Twitch:www.twitch.tv/buildzoid
The Facebook: actuallyhardcoreoverclocking
#Ryzen #MSI #Overclocking

[@MythicEclipseTTV]

My favorite part about buildzoid is he’s a cheapskate like most budget builders 👍 makes his recommendations mean something compared to other people saying “it’s a good deal buy it” he’s like it’s not a bad deal but you can get xyz for 10 bucks less and does the same

[@Erksah68]

Just buy it.

[@Four-sc6gj]

Excellent video, I appreciate these sessions. Helped me to get my 3600 dialed in on my MSI board :D Now time to get this memory tuned!

[@mohsinopiani]

Buildzoid: "Aio cooler on 6 core bad" Me with a 240mm on a 2600x: 😐

[@MarshallSambell]

Oletta Liano that’s pretty bad tbh, the only way that would ever be worth it is if you used a 2080ti with every build or did max cpu in the socket eg 3950x 9900k 10900k 10980xe

[@forgofm7105]

@@MarshallSambell Bad for his pocket, but hey if he wants to, who am I to say no.

[@mohsinopiani]

@@MarshallSambell Well my mindset was to remove the thermal cap for overclocking this chip and also at the same time set myself up for future upgrades. So it will become worth it later this year I hope.

[@UnsettlingNarrations]

@@mohsinopiani Aren't you more likely to hit stability issues before thermal throttling on the 3600?

[@mohsinopiani]

@@UnsettlingNarrations Yes, but that is the point. I don't want thermals to be the limiting factor. And also, if I choose to apply a much higher voltage than needed or even safe for my chip, then I can also run that cool if I wanted to. Even if it degrades my chip.

[@JFKEOD]

Just subscribed due to you showing me just how little I know about overclocking. Teach me your ways oh wise one!

[@outcast6187]

Good video, what about ram overclocking for the Ryzen 5 3600 to get the most out of it?

[@lilarkor]

I am not much of a overclocker, I just work with stock and play games, but I love this a lot. Watching your MBO reviews and overclocking videos is really something special for my new found knowledge. I learned a lot last month or something watching, so thank you.

[@AKSKMY]

@Actually Hardcore Overclocking, is there a difference to just straight do OC via override and not do the PBO stuff at all? Cuz I thought its usually either u use PBO or just manually OC by choosing your voltage and core frequency.

[@BeastLT]

I have a question about the CPU EDC setting. When I set it to 160 A, it actually reaches very close to that value in both Ryzen Master and HWiNFO when running a stress test or even a R15. Is that safe?

[@ActuallyHardcoreOverclocking]

FIIIRST!!!!!!!!!!!!!!!!!

[@peterpain6625]

**slow-clap** ;)

[@jiwookim348]

Unless?

[@slangerzz]

I've been waiting for this for long time :D

[@PaulHawke1337]

Dammit BZ... X D

[@raawesome3851]

Buildzoid, can you do this for an AMD ryzen 7 3700x on Asus Motherboards?

[@JoeBob79569]

There's just so many tiny little tidbits of information in these videos, it's great. Compared to some of the other people who post overclocking videos where they just tell you what settings to change and you're none the wiser at the end. The casual ranting here is absolute gold..

[@LadyEmilyNyx]

I have a 3800X (because when I got it, it was only $15 more than the 3700X) and CCX0 can hold 4.475 Ghz, while CCX1 can only hold 4.2. @1.275v So I think per CCX is definitely something to look into, even if it doesn't always have a huge benefit. You won't really know until you try.

[@xMooD1]

And how? Find a stable all core oc (my R5-3600 can do 4.2 @ 1.2375v) and then bump up the clock per ccx until it crashes at the same voltage?

[@LadyEmilyNyx]

@@xMooD1 I started absurdly high on the voltage, found the max I could run stable all core, then raised the fastest CCX till that was also stable, then stepped back voltage till I lost stability. I started at 1.55 but you probably don't need to start higher than 1.35 or so. Both my 3800X, and my 3600 hit heat limits before they hit voltage instability, under custom loops. 7nm just can't disperse the heat fast enough to really show what it can do :( So unless you're running subambient, I don't think Ryzen ever needs above 1.35, and can usually be pulled down lower. YMMV, of course.

[@xMooD1]

@@LadyEmilyNyx Wow, thanks!

[@TheHavocInferno]

@@LadyEmilyNyx That's not a good way of doing it. Even 1.35v can be too much for Ryzen 3000 and lead to degradation. Buildzoid did a good video on determining FIT voltage. Stick to that and then raise CCX clocks until you get instability. Do NOT start with absurdly high voltage.

[@jaxsonmillz6474]

I jus killed my x570 TUF+WIFI playing Elden ring showing my OC on My 5800x @4.8+0.2 OC hehe not so TUF

[@uwu1976]

is there a written guide for this? I mean great video, but im still a beginner and want to know the settings for this.

[@cracklingice]

Have you done a rambling about c-states video? Would be interested in seeing all your thoughts about c-states and the like in a single place.

[@jamesonly4835]

I also have this combo, and I will use this video as a guide right now !

[@BatteryAz1z]

Unrelated but I just purchased two of your keep calm and raise vcore t-shirts. That design looks great.

[@DClaville]

Thank you for making this BZ a fast question? When i get time ill be doing the work to see how my R5 3600 silicon is and how i can push it on my B550-A Pro. my new ram is taking for ever to get here tho.. if i test and find whats stable on the CPU now will that change if i run different ram with higher Volts later going from 32GB G.Skill F4-3200C14D-32GTZR to a kit of 16GB G.skill F4-3600C14D-16GTZNB when they bother to sent it to me that is -_- the XMP on the new RAM is 1.45V the old is 1.35V but also a larger kit or am i overthinking it? so should i wait for the ram before i dial in the OC of the CPU

[@jake20479]

tbh buildzoid.. im curious. is it better to do a static OC with ryzen using safe voltage or let it run stock and hit 1.5v regularly?

[@VenusTube]

@Actually Hardcore Overclocking Does the game boost do anything, if I do it on mine I get the best results in Time Spy 3dMark, then again I am using the stock cooler :P

[@conradical5941]

I gave the video a like for the amount of info in it. How did you determine the optimal level of LLC? On your CPU you used level 7, what stopped you from using higher vcore and allowing more vdroop by selecting mode 8?

[@SteadyPetesFPVquadracing]

Which Prima 95 version do you recommend?

[@RaVuK100]

@BZ. Id this any good in your opinion? Alpenföhn® - Olymp 340w tdp. Bought this fiew years back on sale from overclockers I think £45 or so. Liked fans on it so bought 4 x140mm from them to my case.

[@deniskorugic2145]

Thanks for the video, it was almost made for my system. But an question, do you leave PBO enabled after manually setting the values? I read some article’s recommending to disable it for oc 24/7

[@ActuallyHardcoreOverclocking]

manual OC overrides any PBO settings.

[@michaelnorthrop1205]

My tomahawk X570 is coming this week. Now that you’ve been able to play with it a bit, do you still feel it may be your ‘go to’ X570 motherboard in this price range (as you mentioned in the gamers nexus vid)? Has it lived up to expectation?

[@MarcFun]

How do u like it ? Do you recommend MSI MAG X570 Tomahawk for overclocking 5950, i;'m looking to reach 4.7, 4.7 or even 4.9

[@MrPuddinJones]

is there a setting in the x570 bios to let CPU voltage have a max cap? vs static voltage? i cant figure it out to save my life. i want the voltage to drop when idle like normal- but max out at 1.275

[@CivilizationV]

Hey, I'm new to overclocking and a lot of your videos go over my head. What resources should I use to try to further my knowledge?

[@cmdrsoyo7154]

just watching more of these videos helped me a lot. there are some videos explaining some basics like how VRMs work or what effect certain settings have like he showed in the 10700K overclocking video with the oszillosope

[@mikaelgaiason688]

I second that. Just watch everything bz has made. Then watch it all again

[@LadyEmilyNyx]

@@mikaelgaiason688 I second the "watch it all again" part. With every video, I come to understand things a little better, and older videos make more sense, and I learn things I missed the first time.

[@ShamanKish]

Try Hardware Numb3rs.

[@alanhaigh9682]

Basic overclocking is fairly simple these days. The trouble I've had clocking a 486 dx66 from years ago

[@KarmaPolice93]

What PBO Limits would you put for a 5900x/x570 tomahawk?

[@sjones72751]

Is there something wrong with going off of ryzen master as to what the best ccx is?

[@mammar2289]

Is overclocking in bios different then overclocking in ryzen master software?

[@ajinkyap7102]

Just bought a 3900x will it OC to 4.4 ghz too ?? On a Msi unify x570? Or am I over expecting?

[@laszlosarkozi1385]

I have a 3600X on a B550 Tomahawk, with 3600Mhz Ram(Cl18). I followed your video(until you set 4.2Ghz) and used the same settings to see if I can get an OC on my system. Strangely Prime95 didn't even start on my system (not even at 4.1 Ghz with the same core voltage you used), it shut down right away. Also even at 4.2 Ghz when I ran Cb R15 my 3600X only drew around 74W. Does that mean that my Cpu is faulty?

[@moisttowelette3881]

Suggestions for this board and a 3900x???? Would be very helpful! @Actual Hardcore overclocking

[@devoker666]

What about boards with no llc setting? I don't know what to do after I find my fit voltage cause my mobo asrock b450 itx has no llc settings.

[@eatthisvr6]

Will this carry over for zen3? Ie same principles. I'm used to Intel but I'm switching to a 5900 when it's released. Just bought this mobo. Ps mine will be on water

[@Sinbad1999]

what cooler do u have? my cpu has never gone down to 39 degrees. i have an air cooler and the lowest it goes is 50 i have a 3600x

[@sabasgutierrez3781]

My Setup on my new build is a: MSI X570 Unify Motherboard AMD 3950X 32 Gbs of G.Skill Trident Z Neo for Amd Ryzen 3600mhz Msi Core 360mm AIO cooler Would your setting that you used on this video, work on my build? I am trying to OC to 4.4. Please advise....

[@MrDoomsday]

Just got r5 3600, with a asrock ab350 pro4 stock 4.2 at 1.38volts is this ok? Or i can give a try better bios settings than stock

[@KGB95140]

How do you think this board can handle oc on a ryzen 9 5900x ? Thanks

[@thesilverwang]

There's a bios update that updates AGESA so my 3700x boosts better on stock settings but kills all core OCing and/or undervolting on mine. Basically I have three issues - 1. it seems to be completely ignoring LLC settings 2. on a static oc of 4.375GHz I have to set a voltage of 1.35v+ to even get it to boot whereas before I could set 1.3v with no vdroop and run stable. 3. if you offset or override the voltage to lower it using pbo it locks all cores to the base clock (3.6GHz on my 3700x). Could you have a look at this BZ to see if the same is happening for you.

[@sunefrodi]

b550 or x570 tomahawk ? Which is most futureprof for ryzen 5000 ? b550 can run 5000mhz ram and x570 can run 4600mhz ?

[@stefbcrich]

Does setting the IF to 1900Mhz and Ram at the same speed inpact thermals and voltage needed for the CPU to run stable at higher frequencies? I have the same mobo with the same cpu and I cannot seem to run my OC stable when Infinity Fabric and Ram are set to 1900Mhz. I can barely run my my CPU at 4.275Ghz at 1.35v

[@Daxter250]

the 3600x comes with the better wraith cooler if i remember correctly. given the fact, that the 3600x comes just with 100mhz more at stock or soi would assume ya can overclock it the same way as a normal 3600, right?

[@Bitz0]

yay a zoid video is on! you know sometimes you & steve(GN) put me to sleep in 10 mins. but i always do watch it back again XD. as usual great content man!

[@eatthisvr6]

Iv got the tomawawk x570 with 4 x 8gb parriot viper 4400 ram and a 5900x cpu. With 4 sticks in it boots to windows but wont show me the bios or post screen, the inly way i can get into the bisis using 2 sticks not 4. Any ideas? Also is fclk infinity fabric speed?

[@stevejohnson6248]

I just bought both of these yesterday, hivemind.

[@stoptellingmewhattowrite]

Good vid, was pretty helpful for my setup! Can you try doing a video with this CPU/board and the Viper 4400 mem? Would be interesting it can handle it. Thanks!

[@unsc0212able]

Do you think the intel 10900k or 10700k any good or is amd just better at the moment?

[@QuaK3RRR]

even on LLC 8 my vcore is not dropping on B450 Tomahawk, why ??

[@djsmileyoflasvegas]

I have msi bazooka v2 and have 2 x 8 ddr4 3600mhz whats the best settings for it or just use xmp 2 at 3600mhz cl18 18 18 42 i think..i have it set for xmp 2 ryzen 2600 but should i tighten the timings or it aint worth it

[@DxeNvtsukii]

Would this method on an asus tuf x570 mobo ? I’m also using a ryzen 5 3600

[@StiggyAzalea]

Doubt you’re taking requests but can you do the 3900x on a gigabyte board? Totally not at all because that’s what I’m running, I just think that would be informative

[@cactusstudiossouth]

HELLO! You are my go to guy for MSI! I recently built my last system with an MSI Z390-A Pro with an Intel Pentium Gold Coffee Lake G5400 Duel Core 3.7Ghz Processor! 1TB M.2 SSD with 64GB DDR4 3200 Ram and a GeForce GTX 1650 Video Card! I use this system for Adobe Video Editing! Besides ticking the XMP & GAME BOOST button with FAN set to Auto, what else can I do to Overclock this system? I was told by MSI after I already bought & installed it that "this is basically a budget gaming board that cannot be manually overclocked? Any advise Would be greatly appreciated!

[@madararinneganuchiha]

what should I do with my ryzen 5 3600XT on the MSI X570 Gaming pro carbon watercooled with nzxt kraken x73?

[@p1st0ls44]

pbo is kinda broken on my msi board as well... used to get good gains now it does nothing at all? hmmm

[@HoKogan007]

So you said at the very end to leave idle voltage to close to prime95 load But Prime95 load to you was with 60ish mV Vdroop So shouldn’t you then leave idle voltage closer to 1.3V?

[@ProvidenceX13A]

I​ have​ 3600@4425 vcore 1.35 Msi​ b​450 pro​ vdh​ Max​, Max​ temp 86 AIO​ nzxt​ m22 Ram​ 2666 is​ good?

[@B4Quattro]

Hey Buildzoid, I run my 3950x at 4.35 GHz at 1.31 V (1.28 under load) and the temps are in the high 70s to low 80s (depending on room temperature) and it draws around 210 Watts. Do you think this is ok? I use the Crosshair VIII hero with LLC lvl 4.

[@avagreen9060]

Sounds about right

[@sergiomadureira9985]

Hey BZ great vid once again, this slots in into my setup perfectly 👍 OC per CCX is a nice way to ‘escape’ the weakest cores, but Zen 3 with its 8C per CCX design makes this feature mute, hence it is rumored you will be able to do per core OC Im excited about that possibility, wbu?

[@MrAndyPee]

moot*

[@TrueRegulators]

I love how this vid's thumbnail is the windows login screen LUL

[@tober1995]

Would love to head your thoughts on setting the Vcore at over 1.3 for a 24/7 OC? Many people tell me that WILL for sure cause degredation. But i see you had no issue with it.

[@xMooD1]

This! I heard that over 1.25 is a no-no and causes degradation on Ryzen 3000.

[@cosmicclayton4399]

Watch his video on safe voltages for Ryzen 3000. He basically uses the fit system to tell him the safe voltages. It makes a lot of sense.

[@xMooD1]

@@cosmicclayton4399 Oh wow, didn't know this, thanks! I thought that the max safe voltage is universal across the whole architecture.. but apparently, it's not! Thanks!

[@coows]

I have run a 1.35 volt over clock for 5 years and its stable as a rock. I just need more ram

[@MarcFun]

Do you guys recommend MSI MAG X570 Tomahawk for overclocking 5950, i;'m looking to reach 4.7, 4.7 or even 4.9

[@donguano9850]

My stock R3600 score With MSI B450i on CB15 is only around 1500. Any ideas?

[@glutenfreeegaming8747]

I got 4.325 on CCX 0 and 4.35 on CCX 1. Any reason why my Corsair V LPX 3200MHz C16 2x8 Kit wouldn't accept the xmp profile on an MSI B450 Gaming+? I have always had to set settings manually.

[@AngeloGarcia-fi3un]

Sir 1. please help me, what's the use of setting the scalar 1x? Does it mean that only 1 of the 6 core is set to precision boost? 2. Why set 200mhz as max cpu boost clock everdrive? Does it mean 3.Why cpu switching frequency Set to 700khz. Is it the amount og clock being switch by the core clocks?

[@robandrews9826]

I run a 3600 on with a 240 aio Playing around with pbo the other day and it boosted to 4.4 with 1.4v but thought it would ultimately damage the chip Is there a max you would go to ?

[@HoKogan007]

Depends what your VDroop is and what Temps you’re getting at 1.4V

[@okaspatika]

I have a problem on this motherboard, where m.2 ssd on slow 2 below can't read the existing ssd. do you have a solution?

[@igoresque]

on x370 taichi per ccx overclock specifically mentions that power saving features are still active when you do a per ccx overclock plus, if you have cppc enabled, your better clocking ccx is going to be scheduled first just like in stock, so no need to worry about which ccx is better

[@dlanornalla338]

Hi Buildzoid and gurus's , sorry newbie here, need help. Is it ok to put 4x8gb GSkill Trident Z neo ddr4- 3600 cl16-16-16-36 on MSI Mag x570 tomahawk wifi and overclock it? If yes is there any reference on how to do that? The processor is Ryzen 5 3600. Thank you very much.

[@GotTheBeatBeetZ]

My 3600 somehow runs at 4.2 ghz at 1.15 volts (stable in cinebench an therfore gaming aswell) And Furthermore i run 1900fclk with 0.975 soc and 0.7 vddg and 0.77 vddp which shouldnt (?) be possible looking at other users experiences. Maybe my motherboard just reads out wrong voltages idk. But im happy overall. Is this normal, are those voltages realistic?

[@cryskro5425]

My Gigabyte X570 Aorus Pro doesn´t wanna boot if i change any CPU clock/voltage relatet settings even after updating bios :(

[@boa974]

Can you do the same video with the same board on the 5000 series? please

[@miorirfan9143]

Hello everyone,im currently puzzled about memory oc on b450m mortar max.Previously i used a b450m steel legend to tighten my ram timing with dram calc and it works fine,but after switching to Mortar Max,i cant apply any of the settings i used on SL,it would just restart 2x and says memory oc fails Is there any setting on msi bios that im not aware of? What am i doing wrong @@

[@igoresque]

have you tried to just give it a +200 MHz max boost clock option while being at stock? to see what its real boost actually is. my chip is a launch crap that won't go over 4GHz at FIT voltage, but with that option almost every core can boost to 4.3GHz at single core loads, except one that can only do 4.25

[@Tom-nh5lr]

What about cpu ratio and voltage in the amd overclocking section of advanced

[@PwadigytheOddity]

Yo, I had a quick question: I’m basically using the exact settings from your “how to get more performance out of Ryzen video” on a 3900XT/gigabyte Aorus Master. I think I also turned on Auto-OC and set LLC to “High” I’m using 2 of the RAM kits you tested (the teamforce xtreme cl14) at XMP. By coincidence, I happened to have bought those 2 weeks prior using the B-die finder app. And I set the Inf Fabric clock to 1800. Anyways. Looking at Coretemp, I’m getting amazing temperatures (as my cooling solution is ridiculous), but the voltages are occasionally spiking really high (as much as 1.5) in certain workloads. Is this measuring something uninportant? Because some of the voltage readings I’m getting using various monitors are so high that they’d have to be frying the chip if they meant anything. and what are the chances I’m overvolting the chip? The CPU never goes above 65, and when running R20 it seems to be automatically putting itself at 4400 allcore with very little deviation. Am I fine, or should I change something. Ideally, I don’t want any degradation. I didn’t manually set anything static except the infinity fabric clock, and those settings under PBO you had in that one video (it was like 300, 230/230, and 4x scalar iirc).

[@fmontanari]

Bump, same situation roughly and would like to know this too

[@Solidlightvideo]

use hwinfo64 not core temp! did you check with prime 95 and look at V under load? (what is it?) what sensor in hwinfo64 is saying 1.5v under load? did you check stock V PBO what PBO settings do you have on?

[@ycatthebrave]

So what were the results?

[@lol8463]

did he test prime95 with avx2 or off?

[@tristrisX]

Does overclocking the 3600 make a difference

[@TheOpenfield]

C-States still work if you set your OC within the AMD Overclocking menu (it even says so in the description). So Allcore OC will not have a negative impact on idle power consumption.

[@Erksah68]

Does it really matter ? Or rather how much do you actually save ?

[@chrishansen2584]

@@Erksah68 Yes it does. My 3600 allcore 4.4 drops to 14 Watt on idle.

[@MrAndyPee]

I have the same mobo and cpu, please help why can't i stably set the buss clock to 101mhz? it was stable on my cheaper msi x570 a pro board does this mean a defective mobo please help?

[@no-eb2xx]

Only OC one CCX, leave the other one at lower clocks and try when it crashes. Then do it the other way around. And then set the both to the values you figured out and hope it doesn't crash 😀

[@Dennzer1]

yesh!

[@argasasrgetthe9032]

how is HWinfo showing im only using 90W on my 3600 with 4.25ghz allcore with 1.35v while ure using more with less voltage, its prime95 stable and the performance checks out in cinebench, well its on an asus b450 strix

[@eatthisvr6]

just got a 3600xt with this mobo, 1st boot and the bios is showing 1.43vcore, is that ok?

[@kevoman4980]

I can't boot into my UFEI? not sure why..... del push Shift start not doing it....? ideas

[@nathanb4151]

I need help, latest click bios 5, ryzen 9 3900xt, i found no tutorial for this...

[@sgredsch]

i got a 3600 doing 4,4 ghz allcore @1,25v (bios) minus vdroop on a gigabyte x370 gaming 5 with 3600 MTs B-die - nothing optimized (living room PC), cinebench and gamestable, didnt test prime. at that point i feel like a static OC is the way to go, isnt it?

[@techbuildspcs]

Yaaay. If usps does not lose mine in shipment ill be doing this very soon. Thanks man!

[@guilhermecoelho5028]

Great vid Bullzoid! I'm also looking to do the opposite as a means to decrease a PC power consumption. Could you to a video about undervolting and underclocking for a significant power consumption? I know that just decreasing voltage and core clock can achieve this but I'm wondering about which settings to use on VRM to further decrease the power consumption.

[@Solidlightvideo]

just use stock? why do you need to drop power use, the zen 2 are relay low power cpu's? im amazed looking at my cpu at stock it's using only about 8w per core when maxed out! thats super low. the only way to drop power use is under volt or set a power limit on the cpu in bios something like go in to the pbo bios settings and put a lower than stock power limit on the cpu. the only problem i have is heat disopation, wonder now if a BIG air cooler was a mistake over a AIO option

[@hyptek0962]

How do you have soo good bios? I have the shitty black/white bios where I cant even controll the fans help

[@Chinhnguyen0497]

my cpu even runs below 4ghz at 65 degrees. in the tests it ran around 3.8ghz and the temperature was only about 85 degrees at max. Is this normal when its clock speed so low?

[@sergiomadureira9985]

FYI Ryzen Master tells you in which CCX the best cores are so its a nice way to check before doing CCX OC

[@Sherudons]

Been having some issues with my system for the past few weeks, it won't recognise 16 gig anymore the 7.95/16 used in windows, cpu id shows it see's both sticks, I cannot OC anything anymore, game boost will black screen, xmp 1-2 will black screen and not change a single setting, manual setting the voltage, black screen, it's driving me nuts. Tried reseating everything, cleaning everything, pin checks, different ram slots, different ram, bios update to the latest, memchecks fine, but the bios only recognises 8 gig of ram too instead of the usual 16, at this rate I'm thinking the new bios updates failed or deleted something making my gear work when it was last year. It's only a 2600 with a pair of 3200 ripjaws, but it's doing my head in, it worked last year, but just randomly stopped this year... at this rate I might just leave it at stock and deal with slowdowns while gaming and get a new system. Only thing that's actually changed is I fresh installed windows onto an SSD but I think it still worked for a time, so its also a simple button I don't remember being flicked to the off position.

[@nanolloe]

Quick question for a noob. Why would u go for 70 plus Vdroop as u can just set the Vcore at 1.25-1-27 is enough for 4.3ghz with LLC mode 3~4(less Vdroop) is there anything that Ive miss? Im aware as cooling get better you could have lower Voltage. But yeah Waiting for Short answer.

[@findingrusty]

would love to know myself

[@TeoshadeMC]

I have a question: I want undervolt my 3600XT to low temps and consumption, and actually I’m using a negative offsett of 0.1000 and all the rest stock bios settings, Have I to use LLC for stability? Because before I tried -0.1250 but at the end of the run of R23 the pc restarted so i returned to 1000, thanks in advance if someone will help

[@SinisterPuppy]

Thank you for making this. I spent 8hrs this past Saturday trying to wrap my head around B550 gaming edge with 3600. This will give me some good ideas. Noctua NH-U12S kept my old 1600 @ 3.8ghz @ 1.35v nice and cool. This 3600 when folding@home or small FFT prime95 loves to run upto 86c. Was honestly trying to find how to tame this cpu. Getting new paste and going to try to reinstall cooler; maybe it's something as simple as that. Voltage offset kills performance to much. I know, I'm doing the opposite of this channel :P Trying to get this running cooler now during the winter so in the summer I won't cook myself alive.

[@sebastiangonzalez9992]

How the ... do you know how to "tune" memorys? I tried memory tune for ryzen, but never worked for me. I just want optimal config for my 3200mhz memory and less power usage. Because is turned ON all day.

[@BornaPrpic]

Hi :) I've gotten myself X570 Tomahawk in preparation for the 4xxx series coming out. I couldn't put my 1700 in there so I bought a placeholder 3600 that will alter be moved to my B350-i machine. I still can't believe it. On just a 120mm cooler master master liquid AiO it's working at all core 4.5 GHz at 1.335 Volts under 90C. Stress tested for 3 hours. I'm starting to suspect they've put a 3600XT quality die inside some 3600 honestly This was really fun and I didn't even try to OC just one CCX to 4.55 or 4.6 yet :)

[@PastorwithoutaPulpit]

Very interesting as always AHOC well done... I'm asking here trying to learn to see if I understood this session. Wouldn't it be better to set both CCX's at the 4.2 or whatever you know they can do and then slowly raise one until the spread is like 100mhz. Then bump the slower by .5 see if it's stable and go back to bumping the higher clocked CCX until it's not stable. Back it down to where it was stable and start bumping the other one up until the systems no longer stable. Back it down a little to where it's stable and that should be where you end up as your daily after testing? I really am asking as I'm getting ready to upgrade to Ryzen and haven't done any over clocking on them yet. Thanks to anyone who first can understand what I said above... LOL ...and thanks to anyone who takes the time to help me...

[@davidhiggins2804]

with those motherboard settings would you run this for everyday use?

[@Solidlightvideo]

all silcon is difrent so watch how he finds the safe spots and know there is some risk. so dont just copy the settings from the video, find your safe points and know what you want.

[@marlonmori8833]

Msi have p-state options?

[@chadmckean9026]

In my exp adjusting the max clock speed for PBO on the 3600 affects non all core work loads (and it may not be stable) and the only power limit that matters in the socket limit my 3600 will hit 80C with a NH-D14 (in some prime95 loads [diff thread counts]), oddly it throttles at 80C, but i had the 'CPU temperature Warning Control' set to 85 (bios -> advanced -> hardware monitor), not sure if that would do it, PBO was off