Overdrive Guitar Pedal From Cheap LM386 Amplifier from Amazon

[@zurowetz]

Awesome you did a great job 👍🙂👍

[@CavershamGuitars]

Thank you so much!

[@shubhanbrahmkshatriya7460]

ZUROWETS!! HI

[@zurowetz]

@@shubhanbrahmkshatriya7460 hallo0O!😊

[@zurowetz]

​@@shubhanbrahmkshatriya7460 hallo0O!😊

[@patrickmcmanus5373]

I bought several mono and stereo amplifier modules, microphone amplifier modules and am turning them into guitar pedals. Can you try some other modules. I recommend the stereo amplifier mono as they run from 9v . You can also use a buck converter to turn 9v to 12,18 etc and get more gain from the module ❤

[@CavershamGuitars]

@@patrickmcmanus5373 I'll have to check some other boards out.

[@hellosailoreffectsofficial]

Hell yeah mate ⚡️ nice work mate

[@CavershamGuitars]

Thanks Joe!

[@spacewolf9585]

@@hellosailoreffectsofficial Joe, we definitely should do an episode of the pedal dive podcast where we look into different available cheap circuits that can be modified into different effects!

[@hellosailoreffectsofficial]

@spacewolf9585 I love it mate. I'm 100% up for that!

[@CavershamGuitars]

@@hellosailoreffectsofficial I followed this article to make a delay from a PT2399 board recently www.anexium.com/instruments/PT2399-Mods.html There's a video on my channel of it. I put a buffer in front of it but I also ran an LM386 board straight into an unmodified one and it has a Mid-Fi electronics Clari(not) thing going on.

[@spacewolf9585]

Great build! I have built quite a few LM386 based pedals and practice amps and will definitely be looking to grab some cheap amps like this to experiment with!👍🤙🖖

[@CavershamGuitars]

@@spacewolf9585 thanks!

[@MikeGervasi]

+1 for jamming out some Tap.

[@tigmil8116]

Ive made quite a few of these and share what i learn with my buddy zurowetz. Do you have the wiring diagram for this? I wanna play a bit with it. I wanna build one and then build another playing with the values of stuff.

[@CavershamGuitars]

Sure drop me an email [e-mail]

[@MikeGervasi]

Same here. I never got mine to work for some reason. I wanted to power it with a 9V but something was off. I've built far more complicated pedals...I bought 10 boards, maybe I had 2 duds?

[@CavershamGuitars]

I hooked the second one up to a speaker to make sure it was working first. It also prompted me to go back and finish up a cigar box amp I was working on a couple of years ago.

[@Gtman400]

Can you make Chorus pedal. If possible, Great Video 👍👍👍👍

[@CavershamGuitars]

I could have a go at a chorus. The easy way would be a kit but I could put something together on vero board too.

[@tigmil8116]

Is it an on off switch or on/on?

[@CavershamGuitars]

I used a DPDT on/on switch