This video shows how to make a speaker using paper, magnets, wire, and hot glue.
Пікірлер: 226
@littleguy30023 жыл бұрын
Because of you, it's a project in our science class, to make a speaker, thanks alot..
@littleguy30023 жыл бұрын
@@rosaliedezainde8367 Actually it wasn't, got a 100% on it :) still ; I have STE and ST, my STE is at 60% and my ST is at 48% This counts in STE, which is sad :|
@littleguy30023 жыл бұрын
Could have gotten my ST higher too to get my diploma
@405zx Жыл бұрын
Because of him we can make a speaker for our band thanks to him alot
@littleguy3002 Жыл бұрын
@@405zx You make a paper speaker for your band? 💀Crazy funny
@405zx Жыл бұрын
@@littleguy3002 yep except we made it much bigger and made more and it works
@3amali12 жыл бұрын
My 8 years old had made this following your instruction and it worked really well. Excellent instructions.
@esper.saint.p Жыл бұрын
What instructions
@Kayshots4 жыл бұрын
Ahh so this is how those speakers in local stores are made
@isthisshadow49553 жыл бұрын
It's not the same that's not how they make them
@IGRIBHU3 жыл бұрын
@@isthisshadow4955 Ever heard of sarcasm??
@Klypetang2 жыл бұрын
😂
@arpit2672 жыл бұрын
No bro you are not right it's made with a one circle magnet and copper he needs iron body
@Kayshots2 жыл бұрын
@@arpit267 sarcasm bro
@oldgiapetto5 жыл бұрын
Will this work with your home-made radio?
@indubonia66194 жыл бұрын
Yep
@SheeenBean4 жыл бұрын
😂😂😂😂
@gamerboyking73613 жыл бұрын
Yes
@CarsonSmith-eh1jb3 жыл бұрын
You need an amplifier first
@joefuentes29773 жыл бұрын
@@CarsonSmith-eh1jb *homemade* amplifier
@sadafrehman3286 жыл бұрын
You need to add in the theory behind what you are doing, either by speaking or captioning it out!
@abeginnerspov59683 жыл бұрын
@Cody Weber you need a thin diaphragm and a spider too or the voice coil will jump whatever way it likes.
@Rad_Pie4 ай бұрын
what is it? the therory of sound 💀💀
@nekbiodieselworksАй бұрын
As a science teacher, I did this one in our science class. It was a big hit
@jalanmcrae Жыл бұрын
Seeing it made makes it feel more like magic.
@btswifeu_purpleyou70662 жыл бұрын
Hello! Can I measure the both speakers you made with a multimeter?
@blackswans74174 жыл бұрын
Who got asmr tingles from this Like: yes Comment: no
@melissakouassi48456 ай бұрын
Does it matter how thick the wire is?
@MyAddad8 жыл бұрын
How many turns of wire and where do you get the magnets from, and does it matter about the polarity of the magnets ? Great job by the way......
@OverEngineered8 жыл бұрын
The exact number of turns is not very important. I did about 20-30. I've had the magnets that I used for a few years and can't remember exactly where I got them. They likely came out of something that I took apart. The polarity of the magnets does not matter. Thanks!
@MyAddad8 жыл бұрын
Thanks for the information, very useful....... Great video.....
@philyrics61043 жыл бұрын
@@OverEngineered you should have atleast 4ohms impedance of the coil for it to be safer with amplifier
@angktrl2 жыл бұрын
@@OverEngineered does Square magnets do the same job? I have some strong square one that's why I am askin
@bhuvqn2 жыл бұрын
@@angktrl yes i think
@jctheexplorertv7 жыл бұрын
Well it really works for me, nice one. I made a bigger one using neodymium magnets.
@angktrl2 жыл бұрын
Cool now a person four year later has a question... how is the quality of this speaker ? I can't really understand or be reliable from a video about sound quality. So if I can hear your own opinion I would be glad
@vote4nicki5332 жыл бұрын
@@angktrl it's probably really really really shitty. Of course he probably had access to better materials than this. This is meant to be more of a science experiment rather than to make an actual speaker, it works tho which is honestly really cool. If you want a good speaker, chances are you can probably go to goodwill and find one
@PungaClava4 жыл бұрын
What type of wire did you use??
@ataaslan51773 жыл бұрын
copper
@PungaClava3 жыл бұрын
@@ataaslan5177 lmao
@luckygames60247 жыл бұрын
This is a ricers sound system lol XD
@nathanieldonahue71193 жыл бұрын
Q
@jctheexplorertv7 жыл бұрын
you can make it eve in a plastic cup so that it will produce a larger sound, specially the cone shape, the longer the cone shape, the larger the sound it will make. :-)
@abeginnerspov59683 жыл бұрын
Larger means? Deeper or richer or louder?
@windestruct2 жыл бұрын
Is this paper sticky note sized?
@s.jawadnaqvi2054 жыл бұрын
Thank you.its working perfectly
@atroche19786 жыл бұрын
Awesome video. Some step by step instructions would be nice too. 😎👍
@__youngbasshead__71996 жыл бұрын
For people saying there is something wrong, you have to wrap the coil correctly you can't just slap it on an call it done
@bethannesgarden4 ай бұрын
Awesome! Thank you for this tutorial!
@J4KOB-_-3 жыл бұрын
you are so genius!!!!!!!!!!!!!!!!!
@LameSlime11 ай бұрын
can connect this diy speaker to ur diy radio ? It will be cool
@lizhoneyman62946 жыл бұрын
So I take it we're connecting some output wires from a sound source to the wires wires shown?
@josiahgarcia50466 жыл бұрын
Liz Honeyman
@yakoopfofficial4 жыл бұрын
Please make tutorial how to make coil please !!!! Very nice tutorial!
@abeginnerspov59683 жыл бұрын
Use a slow moving motor or a dc drill
@StevenStGelais3 жыл бұрын
@@abeginnerspov5968 i think the biggest concern here is the resistance the coil should be.
@proyoutuber50822 жыл бұрын
Thanks I am also make this paper speaker 🔊💯
@zacharywinders58278 жыл бұрын
thats f***ing cool
@kevinzhang33135 жыл бұрын
pretty cool how all speakers are is magnets vibrating
@niladridas40064 жыл бұрын
Hi, I made a very similar one but the sound is very low and after using an amplifier only the noise increased. The sound isn't audible from even a meter away. I have used 20 windings, and 3 neodymium magnets. Do you have any suggestions?
@lenechris652 жыл бұрын
ik i might be a bit late, but you’ll need many more windings than that, like 70, and you’re also gonna need more power
@lenechris652 жыл бұрын
yeah its probably the power you need more of
@richerv68752 жыл бұрын
@@lenechris65 ya think hes gonna need it 2 years later
@AGG-hd2 жыл бұрын
Use hem for airpods
@bhuvqn2 жыл бұрын
@@AGG-hd tf
@calamari3772 Жыл бұрын
Is that thing actually making the sound or is he playing an actual speaker in the background?
@moonbright73735 жыл бұрын
Do you have to burn the end of the magnet wire for it to work?
@mrnac55 жыл бұрын
Indy IFA the wire you have to use is coated kinda like a regular wire with rubber/plastic on it, but instead of rubber/plastic it’s coated with a very thin layer of non conductive material, so when he burns the ends he’s taking off that coating so it’s conductive and he can make a connection.
@techzen19353 жыл бұрын
How many rounds of copper did you took around that magnet ???..
@Edgar-rs8lg6 жыл бұрын
Lmao I lost quite a few brain cells reading this comment section
@ozapenguin7 жыл бұрын
Could I just cut the 3.5mm jack from broken headphones and connect it to the copper wire, then plug it into my phone?
@OverEngineered7 жыл бұрын
The only reason that would not work well, if at all, is because the signal coming out of a phone is fairly weak. You need a strong signal for a crude speaker like this to produce sound. That is why I used a powerful stereo system amplifier.
@ozapenguin7 жыл бұрын
Would you need a less stronger signal if you used more coils or a bigger magnet?
@OverEngineered7 жыл бұрын
A stronger magnet might help some. But, the best thing to do if you have a weak signal is make the speaker very small. For example, the 3.5mm jack from a phone is made for powering headphones which are small speakers. You need to amplify the signal from a phone if you want to use speakers bigger than headphones.
@ozapenguin7 жыл бұрын
Is the size in the video too big for a phone to power it?
@OverEngineered7 жыл бұрын
Yes
@okeyeng802410 ай бұрын
those magnets, they are fragile like glass, don't make them pull towards each other from a distance, they can break easily
@SheilaBirungi-vy4gi3 ай бұрын
Nice
@jozefnovak77503 ай бұрын
Super!
@mythnokthewolfbat3 жыл бұрын
might need this for robot repairs aka have wires goin to this if it works
@josephturner28867 жыл бұрын
How can I fix my coil wire that is broke off at the speaker?
@abeginnerspov59683 жыл бұрын
Soldering
@nguyenhien5377 жыл бұрын
amazing! But how can you move the coil when it's contacting with the audio jack?
@OverEngineered7 жыл бұрын
I don't understand the question.
@open_mind11117 жыл бұрын
you use the COIL with two electric cable but how to play music with 3.5mm audio wire?
@noclickbaitting33937 жыл бұрын
Nguyễn Hiền do u mean like 3.5 mm jack to speaker? You just connect wire to wire
@xGOKOPx6 жыл бұрын
Buy/salvage a 3.5 mm jack socket and connect the outputting wire to the coil wire lol
@mny-patentcatalog6817 жыл бұрын
Creativ AND entertaining
@mr.flowjay65443 жыл бұрын
I have some questions. 1: does the gauge of ur wire matter? and what would you reconmmend 2: Can you having multiple magents to power speaker?
@wearefromserbia97143 жыл бұрын
i was wondering the same "can you use more magnets?" as far as i have seen its all ok if they are stacked on top of each other and if they are of course the same size as for the thickness of wire i think its 0.2mm (idk what gauge is that) i have seen 10 inch speakers using same 0.2mm wire, so i guess every speaker pretty much uses same vires, but you should watch out how much ohms does your speaker have before putting it into an amp. You should probably look towards 4ohms as most amps support it. But i couldn't find how can you calculate how much ohms will the vires have I hope i helped you
@alextorres32103 жыл бұрын
Bro el cobre adecuado lo sacas de un motor de reproductor dvd (traen en las bobinas dentro de los motores ) usas al menos uno de los imanes no hace falta tantos con uno es suficiente y el marco lo haces con carton o algun otro material que puedas darles detalles diminutos. luego el diafragma eso es lo interesante para eso usas film aluminio y haces un molde con alguna especie de porcelana o masilla para darle la forma de diafragma al film de aluminio con eso haces un driver de headphones eso si antes como dijo el amigo del anterior comentario controlas la cantidad de ohms deben ser aproximadamente 32 ohms saludos!
@quarantinecommunity3842 жыл бұрын
Mine is not working I don't know why
@arrahien81097 жыл бұрын
Man I wish my house wasn't normal and had arts and crafty shit lying around
@kevinzhang33135 жыл бұрын
uh buy that shit or ask?
@raisfathroosdian51205 жыл бұрын
WHY
@mushroomvillage6 жыл бұрын
Wow.... that's so wondertful.
@hectolonger71622 жыл бұрын
Where can I buy those materials in a store?
@deadboybeats12 жыл бұрын
Redstone tutorial
@jaybruz.56883 жыл бұрын
replaced the speakers in my car with these, havent looked back
@jctheexplorertv7 жыл бұрын
Just make the magnet moves freely back and forth so that it can vibrate and make sounds
@thecctwinsoutdoorandgaming98474 жыл бұрын
Its the coil that has to go up and down:)
@Alex-wq6ge2 жыл бұрын
I will use it as a siren
@ALSmith-zz4yy2 жыл бұрын
Can you calculate the impedance of this speaker?
@premlatasingh80607 жыл бұрын
mst h bosssssss
@sarcasmm9 ай бұрын
day 9 of learning techniques and methods of living during a apocalypse
@DARKLOVERBOI6 жыл бұрын
nice
@aj7arts4028 жыл бұрын
THI IS THE BEST MAKE IT SPEAKERS
@baloins3rman3227 жыл бұрын
Can i so this with a plastic plate ? Are 4 neodym magnets good
@OverEngineered7 жыл бұрын
Should work just fine.
@stephengervais12192 жыл бұрын
Very cool!!!😀
@theosmith22147 жыл бұрын
how do you test it
@willyyulianto44857 жыл бұрын
will it work if the side is covered by holed plaatics?
@OverEngineered7 жыл бұрын
+Willy Yulianto Probably. Honestly, the speaker that I made in my other video works much better than this one and was easy to make.
@boashna4 жыл бұрын
bravo good job
@anandtinu88487 жыл бұрын
its copper wire or matal
@jessamae9265 Жыл бұрын
what'd you use to connect copper wire to a device?
@TobyCharlesThompson7 ай бұрын
Audio cable or smth
@kennethsmith53833 жыл бұрын
I think I'll do this and see if I can make a budget amp. Butchering the head of an old fender amp, gonna get that low budget, garbage tone I've always wanted 😂
@1nonly_xeon Жыл бұрын
What does he link the wire to
@TobyCharlesThompson7 ай бұрын
The music source
@hasnatali7136 жыл бұрын
Which song u played with this speaker. Can u plz tell name
@supercoolcowslideshows41126 жыл бұрын
Darude sandstorm
@philmccracken6076 жыл бұрын
How do i make it louder ?
@D1D_Official5 жыл бұрын
With amplifier
@RingtoneCentral6 жыл бұрын
How do you know which copper end is negative and which is positive ???
@screamahlee96253 жыл бұрын
Simple. If it smoke you got it wrong if not its right polarity. Just dont let your house burn down to ash 🤣😂
@TobyCharlesThompson7 ай бұрын
Its just copper man. Theres no negative and positive.
@nicolasperez47313 жыл бұрын
can i use normal paper or do i have to use the paper shown in the video
@HimeshKundal3 жыл бұрын
U can use anything which vibrates easily
@mugi_kun Жыл бұрын
so funny
@TobyCharlesThompson7 ай бұрын
@@HimeshKundalYeah correct
@hadyffmhi7873 жыл бұрын
The music test reminds me to How to Basic
@TheMNrailfan2276 жыл бұрын
Can this handle really hard bass?
@OverEngineered6 жыл бұрын
No. But with modifications, you might be able to make one that is good enough for music.
@DylanGamesOfficial2 жыл бұрын
What kind of wire
@mugi_kun Жыл бұрын
thin copper wires ofcourse
@mrymfwz3256 Жыл бұрын
how were the wires connected to the music source?
@TobyCharlesThompson7 ай бұрын
Through an audio cable
@Roufoxx22 күн бұрын
You can connect it an amplifier
@dani45987 Жыл бұрын
wowwwwwwwwww
@TheThorns8 жыл бұрын
what kind of wire did you use?
@chlordk8 жыл бұрын
Copper and isolated.
@aaronspencer54528 жыл бұрын
what kind of wire did he use?
@sumang.sharma41547 жыл бұрын
copper and isolated
@aaronspencer54527 жыл бұрын
Ok thanks
@Endacopia-h2nАй бұрын
W😮
@OfficalOxy Жыл бұрын
do i really have to waste my sticky-notes for this?
@ramgour20036 жыл бұрын
I love you and your family
@omguptaaaa8 жыл бұрын
can u make any other speaker without magnet
@OverEngineered8 жыл бұрын
I just looked into it; there are at least two types of speakers that don't use magnets (plasma speakers and electrostatic speakers). The problem is they would be a lot heard to make by hand.
@Anonymous-kl7hz3 жыл бұрын
I just made one and hooked it to my home surround sound and it was clappin then my receiver shut off and wont turn back on:((( the speaker was clappin tho hella bass
@user-qo6rr3cc7q5 жыл бұрын
Homemade na speakar ma sikka gevu shu chhe
@danielblackbird93892 жыл бұрын
Thanks
@attilarivera7 жыл бұрын
awesome!
@mysterywalidunia56637 жыл бұрын
how many times we shoud role the wire
@ericrodrigues37497 жыл бұрын
indian einganeer ur name is intreaging
@TimpBizkit6 жыл бұрын
until you get a resistance of about 6 ohms
@bestshots45077 жыл бұрын
what happen if i use a magnet of a hard drive and a long wire ?
@OverEngineered7 жыл бұрын
+best shots افضل الّلقطات Any magnet will work, but the shape of the magnet may influence how well it works.
@bestshots45077 жыл бұрын
thanks i choose this project in my study im working in but i still have a problem with link i linked with jack plug 3.5 but i dosen't work tell me pleaz the teatcher will give me a not about it and thanks
@OverEngineered7 жыл бұрын
You need a decently powerful amplified signal for the speaker to work. Your signal may be too weak.
@windestruct2 жыл бұрын
@@OverEngineered can you use wires without insulation?
@heavyfromtf21175 жыл бұрын
4:30 background music please?
@Nobachu4 жыл бұрын
there isn't any
@MrTanSned8 жыл бұрын
Where does the sound come from?
@OverEngineered8 жыл бұрын
I connected the homemade speaker to my amplifier. It is working just like any other speaker; the paper is vibrating which creates sound waves.
@ramshresthgope4 жыл бұрын
Why now you are not uploading videos
@michaelclairforet5031 Жыл бұрын
Audio please, and if you don’t know English then text will do.
@isdunyasi8 жыл бұрын
perfumed wire he used
@ralphoutland52265 ай бұрын
How it's made... Airline headphones
@shafitahmed36927 жыл бұрын
Ha bro I can use shop magnet that look like circle .that OK for making speaker
@AshwaniKumar-uk7qe5 жыл бұрын
Man plz also mention the things that you use in your inventions
@millonrose82298 жыл бұрын
where can I get that magnets
@OverEngineered8 жыл бұрын
+Aleem's creations Any magnet will work. Small round ones are good. Any place that sells refrigerator or information board magets will work.
@grimreaper78627 жыл бұрын
Aleem's creations no not any magnet will work i got some at walmart and they dont work for this
@MdNaim-vo8th7 жыл бұрын
Aleem's -- it's a neodymium magnets, purchase it lon Banggood.com, or amazon
@Swagolisious22 жыл бұрын
What a weird world
@samarjan28935 жыл бұрын
Wow man
@robinbob48457 жыл бұрын
you could make the diaphragm out of baking paper witch is a lot thinner so the paper vibrates better
@julieradymska49072 жыл бұрын
That would sound shit and what's a diaphram, you mean the cone
@nitishsurpur83417 жыл бұрын
you are cool
@anandtinu88487 жыл бұрын
my one is not working
@charlieangkor86495 жыл бұрын
now put it into a car and knock the windshield out with a dubstep music