OVERSIZE BOULDER IN 1600 TPH KOBELCO GYRATORY CONE CRUSHER REMOVING BY EOT 80 TON CRANE II

[@cameltanker1286]

And to think that they could have had production back up and running in 5 minutes or less if they had an extended reach excavator with a hydraulic jack hammer.

[@TECHNICALINFOMINING]

Yes it's will be try

[@bacilluscereus1299]

Some type of explosive might be better. What would the extended reach excavator do in the periods when the crusher was working normally.

[@perryprice554]

H H&&&& H&&&&&&& H H

[@AndreasDelleske]

Just a well secured man with an air jack hammer. It's not enforced concrete.

[@spooky3669]

@@bacilluscereus1299 kzbin.info/www/bejne/amSUYXeKZd-Be8k

[@KG-yn9qi]

The blind talking to the deaf leading the blind guided by the one that can not talk! Hi my name is Larry and this is my brother Darrel and my other brother Darrel!!!

[@Dragonuv2002]

How can a company invest all this money yet fail to anticipate something like this? For less than the cost of a single tire on those dumpers, they could install a pneumatic hammer to move and/or break up large boulders.

[@malcolmmckinlay2143]

Or monitor the size of the boulders being loaded

[@grumpyg9350]

Great job. These guys did exactly what was needed with what tools they had.👍👍👍👍👍👏🏻👏🏻👏🏻

[@burnedbeans4170]

You can really appreciate the size of that cone, hook and boulder when the men go down there.

[@hfdzl]

I worked on crushers like this one. Good job for the equipment you have. Need hydraulic breaker on backhoe arm, mounted in bin.

[@craignicholson505]

The guys been down there really puts scale on the size of the crusher

[@thomasbromley9802]

now this is a perfect example of the blind leading the blind

[@sar9907]

This beyond. I currently working in a gold mine. northwestern Ontario. This is like jaw dropping. This is an accident waiting to happen. Definitely a place to turn your back on and run as far as possible.

[@samuelfellows6923]

😠 - They needed to break/smash the rock to crush it, instead of trying to remove it from the hopper 🙄

[@biok2006]

Exactly

[@coveredbridgeman4916]

I'm a Former Blaster back in The 1980's, I would have had That up & Running in about 20 minutes by taking a Cordless Impact Drill with a Masonry Bit a size bigger Than a Blasting Cap & I would have Drilled Holes on Both Sides of That Bolder & Then had everyone Clear The Site The The Countdown at 1 & Fire a Press of The Plunger or Butten Then That Bolder is out of There That easy Poesy.

[@wheelitzr2]

An excavator with a chipping head would have made fast work of that thing.

[@TECHNICALINFOMINING]

Yes, I will try

[@bacilluscereus1299]

Does that mean having an excavator sitting around all day waiting for the jam to occur? Some sort of explosive might be better.

[@wheelitzr2]

@@bacilluscereus1299 yeah because I'm confident that would break their bank having an excavator waiting for a rock jam. I like the explosive idea but there are so many not good things that go along with explosives.

[@spooky3669]

@@bacilluscereus1299 You clearly Never seen this kzbin.info/www/bejne/amSUYXeKZd-Be8k

[@sunbeamsmcdermott1567]

Great video....stay safe...

[@tommelton7864]

They need an Excavator with a breaker on it just for these reasons

[@TECHNICALINFOMINING]

Yes I will try

[@bacilluscereus1299]

Some sort of explosive might be better. Does that mean having an excavator sitting around all day waiting for the jam to occur?

[@pickuo580]

Now I see the real size of that crane and hook, I thought it was smaller. That's why it is so difficult to handle the hook.With the workers nearby you see it in another perspective.

[@ingussilins6330]

Kārtīgs "kartupelis" iesprūda "blenderī"! :)

[@ericafoster4368]

You would certainly think with all the money invested in an operation like that they would have a better quicker and more efficient way of handling a problem like that as it obviously happens alot

[@jaironcarvalho2511]

Fiz muito isso aí na minha do Salobo serra dos carajás.mina de cobre.

[@SarahAParis]

Well, that's a huge pain in the Crusher isn't it?

[@Freecellspieler]

A tip on the front of the hook prevents it from slipping off. Eine Spitze vorn auf dem Haken verhindert ein abrutschen .

[@bohhica1]

Yea! They got it out!👍👍👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@RogowskiBubba0864]

What about grizly bars like they use in goldmining for hopperfeeders? They can instal them on the trucks and fil them up with the right size of load.

[@tilerman]

Just watching this video makes me so frustrated. If this was my outfit there's no way that rock would have got into the crusher let alone the truck. Crazy frustrating.

[@sar9907]

The company that puts production over safety of the employees is not worth working for( someone is going to say they're tied up. I will say fuck your hat). Why sending people risking their life to fix some douchbag mistakes. That giant rock should not be loaded on rock truck then end up in gyro. Secondly invest in proper rock breaker and change that old hook. Quality equipments = Good production. This type of work won't fly here in Canada. You have the right to refuse unsafe work. Plus hefty fines.

[@TECHNICALINFOMINING]

Ok

[@ngcolby]

Just drop the big hook on it a few times....it will break it up.

[@TECHNICALINFOMINING]

I will try

[@jamestboehm6450]

Not enough force with a crane that moves so slowly. The material is very hard and not easily broken. A very large hydraulic hammer hung from the crane would be a good choice

[@wademacdougall1600]

Drill bit and Hamer brake it in two

[@TECHNICALINFOMINING]

Yes will try

[@franklinbrooks9506]

You’ve got to increase the video quality. 480p is 20 year old technology.

[@BeeRich33]

That's when the hook was made as well.

[@TECHNICALINFOMINING]

Yes I will try for best

[@DarkVoidIII]

When they finally got it out, what did they do with it? Easiest solution would have been to crack it into smaller pieces. There's numerous ways of doing that with devastating efficiency. Apparently none of these workers have any idea how to break large rocks into smaller ones.

[@ОльгаКузнецова-ъ1х]

Ребята за раз 300 тонн дробят Уж поверьте они то дело своё знают

[@samohtw1]

This guy needs to put in some time on an arcade claw machine.

[@ГригорийРодионов-ж8ц]

👍👍👍

[@theirishman8356]

When does Fred Slide down the dinosaur

[@pmagnum44]

Ya Baba Do !!

[@nosferatu1229]

A like this video. Very interesting and hard work. But where exactly is the site of this mine? Thank you for your videos.

[@godbluffvdgg]

55:15 for the interesting part.

[@virus56777]

Rookies. ☃️☃️

[@pmagnum44]

How many Indian mine workers does it take to remove that boulder? The whole company. Basically too many managers screaming their own opinion on how to it. And 3 workers down wrestling with that large boulder.

[@jeffmcauliff5315]

they make jack hammers just for this, would had been done in half the time.

[@tilerman]

Way less than half the time i reckon Jeff. Crazy situation that that rock got into the crusher.

[@莊湘棋-p9f]

不知道有沒有傷到機器設備？

[@carstenw]

Wieviel Stunden hat das jetzt insgesamt gedauert? 🙄🙄🙄 How many hours did that take in total? 🙄🙄🙄

[@Stefan_Boerjesson]

Terrible handling of the camera. Way too long video for nothing achieved until the last second.

[@hickory01au]

Did the guy that loaded it in get a pay rise

[@57menjr]

hook stuck ?

[@nicolasm3217]

Question bête, mais pourquoi personne est descendu avec un marteau-piqueur ?

[@albertfrederick521]

Why do they think pulling it backwards will work. It must be pulled forwards. It is defeating the hook position

[@Dillipkumargiri58]

କଉ mines ta

[@malcolmmckinlay2143]

Love to see the cost of all this

[@tilerman]

Down time costs must have been huge. And as others have said in other comments, all's needed is an extended reach jack hammer, job done.

[@thbe51]

Where is this? India?

[@RogowskiBubba0864]

Would this be allowed in a mine outside of India, I doubt it.

[@toddgreenwell9568]

You guys need to seriously consider a hydraulic jackhammer so you don’t waste so much time instead of fishing with a hook at least it’s funny to watch 😂

[@TECHNICALINFOMINING]

Yes

[@clausb.2032]

das zauberwort heisst presslufthaemmerlein.....fuer den stein, nicht die hirne, falls vorhanden!!!!! ein jahr vergangen und die arbeiten noch immer...

[@donalfinn4205]

That hook must be the least efficient tool I have ever seen. Surely they could have a rock breaker on standby for this purpose as it seems to happen regularly?

[@richardbeal7015]

if you have a 80 ton crane with a 40 ton hook then you have a 40 ton crane

[@williamclements3266]

How can tiles be stronger than boulders???

[@theirishman8356]

Mic....key....mouseeeee...lol

[@paulwilliams8555]

What a waste of time a lot of yelling but nothing else

[@MasterKenfucius]

Wouldn't it have been easier to get the jackhammers out and reduce the size of that boulder?

[@sergebeckerich2914]

I think in the quarry they should make the blocks even bigger.

[@malcolmmckinlay2143]

Where is the dope that loaded it

[@robertgutierrez7203]

No cuentan con un pobre martillo neumatico para romper esa roca???????????

[@Freecellspieler]

Sie brauchen Mitarbeiten die Steine mit der Faust zerschlagen können 🙏 oder einen Akkubohrhammer ⛏

[@clausb.2032]

wir sehen hier bilder aus dem 16.ten jahrhundert....

[@Zacht1980]

At least they turned the crusher off for these guys...

[@cojones8518]

Bet that was expensive in downtime. Have to have a word with the loaders not to send that size to the crusher.

[@beanyou308]

. C'est pénible à regarder, on se demande si l'opérateur maitrise bien son palan et s'il sait ce qu'il y a à faire...

[@thomasfrye8996]

Who else hates that hook?

[@TheSagerider]

What these guys are doing is more than extremely dangerous! I hope they got a nice bonus for this one. 😬

[@emanueledinatale4645]

Bastava che la squadra che è scesa avesse un martello pneumatico.

[@Martin4949]

The solution is super easy. Quit putting such big rocks in!?😂😂

[@jamesballock1768]

40 mm HE round .1shot. 3 second fix.

[@garygilbert3302]

What they need is a excavator with a rock hammer on it to take care of these stuck,rocks problem solved,less down time.

[@cannon440]

You don't realize just how big that crusher is until a man is standing inside of it.

[@KG-yn9qi]

Fee fi fo. Grind up the bones of a mine worker to butter my bread!

[@Nikolai-Avdeev]

Такое сооружение сложное, а нужно то еще компрессор и отбойный молоток на такой случай. 5 минут и проблема решена.

[@richardbeal7015]

or they just need a 2 foot tooth on the end of the hook

[@zedsdead6054]

Weirdest title ever.

[@wthorwirth]

No real fail safe plan in such an case

[@KonbOronb]

Полпатрона амонита, капсуль нулевка, маленький камень и через минуту никакого негабарита не будет. Маленький камень нужен, чтобы прижать взрывчатку к булыге, чтобы не разлетелась. Мы так былыги прямо на конвейерах в щахте взрывали и на питателе погрузочной машины. Нормально работало, хоть и не по ТБ

[@porris64]

obsolete machinery truly ridiculous efficiency do not know how to work

[@bread19742000]

They need to upgrade that OLD ASS Equipment

[@KG-yn9qi]

Dam painful to watch!! But have too see who dies !!!!

[@ОльгаКузнецова-ъ1х]

Проще захватом камень вытащить и разбить молотом быстрее будет И простоя меньше

[@lernermarceloandre6489]

100gm de pólvora

[@elainetwum3465]

How about investing in a tool that actually works? Who came up with this? How much money are you losing during this? Stop wasting time and go to hardware store to buy a jackhammer!!!!!

[@mehmetbedirkankaya2340]

bk taşı kırıcı ile kırsaız daa ii olr kepçe kırıcı ile

[@malcolmmckinlay2143]

Clueless,Clueless.Clusless

[@billfender3347]

The camera man’s skill suck

[@stevehartz178]

Got 2 b a better way than that.

[@spooky3669]

Yes pneumatic hammer on an excavator boom kzbin.info/www/bejne/amSUYXeKZd-Be8k But people in these countries are less expensieve and expendable!

[@gac3121955]

3rd world engineering!

[@podgee7507]

need a bigger GYRATORY CONE CRUSHER