I found an e300 just needed batteries I'm gonna follow your videos to upgrade THANKS
@milestone_achiever46343 жыл бұрын
Modified my Gotrax GXL and that thing can go over 20 for sure!!!
@koopah64053 жыл бұрын
@Orlando Shepherd you guys are all over these vids
@milestone_achiever46342 жыл бұрын
@@koopah6405 Thanks Sorry for the late reply. But yeah. I still have my GoTrax. Just learned how to ride a self balance scooter too
@arrowskicks37443 ай бұрын
Got a question. I bought 24v 350 watt with a 24v 500watt controller, throttle with key. Everything hooked up and without touching throttle, tire moves. Do I have a cross wire? My batteries are trash. Going to order new next week.
@anotherasian84735 ай бұрын
I have a E200, just a 36V e-bike controller and 18V Milwaukee batteries. Would it be possible to put it all together and have a working scooter?
@JB-js4xi2 жыл бұрын
I don't need faster....I want more ride time. I am not really electronically smart enough to figure out....how hard would it be to have 2 battery packs...the originals and more....and make some way to charge either set and switch to either set.....like an auxillary gas tank....is that maybe something a repair shop could rig up for me? Or....not possible
@NortheastVintage2 жыл бұрын
Three words: lithium ion batteries. That’s all you need to know and will accomplish all of your goals. 👍
@GlitchedPepsi2 жыл бұрын
@@NortheastVintage can you link me some for the E300? Cant find any. And the original batteries suck. I gotta replace mine anyways since the battery is from 2015 and is dead now
@Aka.Eh-GuyCainglittv.11 ай бұрын
But if you put 3 24v battery the deck not going to fit exactly
@joshuascoggins6949 Жыл бұрын
Future build 2 or 3 24 v motors.. gearing and battery.wut?
@anthonylawler32393 жыл бұрын
What is the throttle and over volt controller brand
@jlesco213 жыл бұрын
How do you charge it with the new controller that’s still connected to The original charging port
@arnovangurp21883 жыл бұрын
Hey, I have a 36V 500W brushed e-scooter. Can I tune/overvoltage it to 48V with an extra battery and 48V controller? Will the 36V motor hendle it?
@matthew-clarkkeeble70153 жыл бұрын
No it won’t because the motor is brushed
@josephhacker65082 жыл бұрын
@@matthew-clarkkeeble7015 no it will work
@chrishayes57552 жыл бұрын
@@matthew-clarkkeeble7015 why would a brushed motor not be able to be overvolted?
@ramadavince66112 жыл бұрын
@@matthew-clarkkeeble7015 are u stupid.
@luckyducky6534 Жыл бұрын
@@chrishayes5755 I overvolted a 500 watt brushed motor for a Razor E300 it works great. Those Dopes don't know what they are talking about. It is all over KZbin people doing it.
@ashleybarkmeyer54904 жыл бұрын
Hi. Did you modify the cover to fit the batteries that are now standing upright, not on its side?
@NortheastVintage4 жыл бұрын
Ashley Barkmeyer Yes. Originally I cut and welded the battery tray Support’s to lower it enough to fit three lead acid batteries standing side by side. But since then I’ve gone to 36v hoverboard batteries and they fit three in an unmodified scooter battery tray. With my existing modifications I’m able to fit four hoverboard batteries. We just took the scoots for an 8 miles very hilly hide and they still had 38volts left to go! This is with a 1000W controller and a 500w motor!
@ashleybarkmeyer54904 жыл бұрын
Matthew Guilbault thanks for the info. I am looking at doing something similar to my e300. I also build RC planes and drones so I am familiar with the electronics. I have a few more questions regarding your mods if that’s ok? - do you have a voltage cut off mechanism for the batteries? - do you need to remove the batteries to charge them? - is your motor a brushed or a brushless motor?
@NortheastVintage4 жыл бұрын
Ashley Barkmeyer Happy to help! One of the reasons that I use hoverboard batteries is because they have a built in BMS so no need to remove the batteries to charge or to worry about cut off voltage. It’s all built in! It’s a brushed motor but I’ve heard good things about the brushless. But honestly the 500w will carry 160lbs up a very large hill and not even get warm to the touch. Not sure how much more performance I need. But I may consider a hub motor as an upgrade to the second scooter. Hope this helps!
@ashleybarkmeyer54904 жыл бұрын
Matthew Guilbault thanks for the advice.
@boriquachic813 жыл бұрын
@@NortheastVintage Hi there! I was wondering what hoverboard batteries you ended up using, if you don’t mind? I came across your vids last night and after I saw this reply, have been searching, but am not positive on what to use for 48v. Thank you!
@topgun523 жыл бұрын
Does your handle bar fold down? I just purchased an E-300 and the handle bar doesn't fold, is there an adapter available to convert non-folding to folding? Thanks
@Juicy.jett242 жыл бұрын
no
@NortheastVintage2 жыл бұрын
The older ones had folding handles. The new ones don’t.
@lycronicals96333 жыл бұрын
Would a 300 watt motor handle this?
@aureliocalderon11842 жыл бұрын
Stupid too confusing 🙄 👎👎👎👎👎👎👎👎👎🤲🤲
@derekh91043 жыл бұрын
How did he fit in 3 batteries? I have 2-9ah’s in and no room is left in the box under the board really..
@NortheastVintage2 жыл бұрын
I cut and extended the steel support bars under the battery tray to make it bigger
@luckyducky6534 Жыл бұрын
You can stand up three batteries side by side. Fast Scooters sells a kit that comes with spacers & longer screws to raise the deck. no need to change battery compartment.
@jlesco213 жыл бұрын
How do you charge it with The new controller plugged in to the original charging port does it do it automatically when you have it connected to the new controller
@NortheastVintage3 жыл бұрын
I’ve since upgraded to lithium 36v batteries with a hoverboard battery charger.
@NortheastVintage3 жыл бұрын
I’ve since upgraded to lithium 36v batteries with a hoverboard battery charger.
@derekh91043 жыл бұрын
@@NortheastVintage how did you fit 3 ska batteries in the e300? I have 2 9ah sla’s in my e300- and no room is left
@luckyducky6534 Жыл бұрын
@@derekh9104 Stand them up.
@marcus116193 жыл бұрын
Uuuuummmmm
@Simcore999 Жыл бұрын
Why avoid a 36V motor
@luckyducky6534 Жыл бұрын
When you overvolt a 24 volt motor it is faster then a 36 volt motor.
@Simcore999 Жыл бұрын
@@luckyducky6534 Pretty sure it has more to do with the controller being limited for the 36v, than the overvolting of the 24v one
@marcus116193 жыл бұрын
Uuuummmmmm
@sideshowdrummer3 жыл бұрын
I just put two new batteries in it and seemed to be fine for a little while dude you can't even get a couple miles out of this thing it sucks
@frasermetcalfe70323 жыл бұрын
me too got 2 e300's both new batteries but 10amp hours each not 7 amp hours each....still max 1.5 miles. im building li ion batteries now
@erniespalding22212 жыл бұрын
Is your favorite word umm holy crap
@milestone_achiever46343 жыл бұрын
Do away with those venerable lead batteries. Please get lithium!!!!
@NortheastVintage2 жыл бұрын
Done! And loving it!
@milestone_achiever46342 жыл бұрын
@@NortheastVintage good for you? Do you feel a large burden off you now? I felt the same way!!!