In this episode of meatloaf we take a look and do some testing of fastener preload, 3D printed file handles, grinding book, Bakelite polishing, grinder wheel storage tote, priority mail box liners, micro mesh graded abrasives.
Пікірлер: 417
@mikemarriam8 жыл бұрын
Tom, I greatly appreciate your videos. It really doesn't matter which project you're working on either. I always try to distill the fundamentals from whatever I watch. On a completely separate subject I recently coined a new term: Liptonite. Thats what you apply to a workpiece when you break out a file to take just a little off instead of setting up a machine. You heard it here first.
@felixcosty8 жыл бұрын
Thanks for the video. For your wood box in a cardboard box, use glue, and cheap white glue you would use in school. Place wood in bottom of box apply glue around the edges of the sides except the top edge place sides in box, let dry. when you ship put everything inside and nail, screw, glue top down, ship next day. Very cheap and glue and wood joints are one of the strongest. If you glue the top down the person getting the stuff out of the box will have extra fun, but the stuff will get there in one piece.
@bcbloc028 жыл бұрын
Actually if you want to be picky about fastener loading we need to know what the bolt stretch is for the torque applied. The box in a box is a good idea but it needs interlocking or fastening to not just blow the whole side out. I was chastised by some for using bolted connections on my bridge crane I built and had a hard time explaining how the bolted connection was stronger than what a perimeter welded connection would have been. That was assuming he bolts were loose and in pure shear, once the bolts are tightened and the friction of the joint is added then it gets super strong. The real world testing is awesome. I love it.
@peteferguson70248 жыл бұрын
Is it me or has Tom become the filing guru :)
@bcbloc028 жыл бұрын
Pete Ferguson Yes I am looking forward to this years filed from billet vise. :-) How many albums is that?
@OldIronShops8 жыл бұрын
+Pete Ferguson always was he's just letting us in on it.
@bcdesignco80138 жыл бұрын
Great video! Awesome to see such a small SHCS withstand so much force! Also keep posting machine shop organization tips, like your grinding wheel stand! Ideas like that translate into more efficient work spaces, and I'm sure we could all use some help in that area. Can't get enough of your machine shop content! Thank you so much!
@capin2328 жыл бұрын
Your best one yet Tom, I can watch this criteria all day long and know I'm learning while watching. Thanks, Brian
@63256325N8 жыл бұрын
First thought when seeing the grinder wheel holder was....toast, warm, fresh toast. Great experiment. Surprised me. Thanks Tom.
@danielwerger56418 жыл бұрын
Very cool Tom...! It's amazing the strength of day to day fasteners we use all the time.... More of this please.....!
@frednewman21628 жыл бұрын
Great demonstration but have to say, I was actually more impressed by the Tig tacks on the lock washer holding at that stress load, or even the lock washer itself not distorting! Nice demonstration Tom!
@ajtrvll8 жыл бұрын
Small hobbyist do-it-yourself-er that enjoys these mild-mannered talented craftsmen showing off their craft. Always watched and learned something without thinking of the effort that creators put into making these videos. The subscribe/like reminders are important in a world where good things are far too often taken for granted. Really enjoy Tom' Lipton's videos... in my top 5 favorite machinists video. Keep up the good work, sir !
@wupme8 жыл бұрын
So if you apply one Tom to a long lever it can be converted to almost 0.4 Aboms
@midgoog28 жыл бұрын
In a former life one of my periodic tasks was to check conrod bolt elongation. I spot drilled each end of the bolt to be checked, measured the length, then fitted the bolts to a conrod applied the specified torque then measured the "working" length to see if they performed to spec before releasing them to production. In the engines we produced the bolts were tightened using the angle torque from nominal snug torque method which put the bolts into the plastic region, so each time they were tightened they got longer. This is why bolts tightened to yield point as is common nowadays should be replaced whenever rebuilding an engine. Cheers Eric
@jaynegus45268 жыл бұрын
A friend of mine received in a flat rate box an expensive replacement part to an antique gun he was fixing for himself. He showed me the excellent job the shipper did to protect the item during transit. The item was wrapped to isolate it and then they took the time and expense of using expanding spray foam insulation to encapsulate it within the package. The shipper even had the item centered in the box so it was protected evenly on all sides.
@aserta8 жыл бұрын
-There is a way to make the Allen wrench without any kind of welding. -You take the Allen keys of your choosing, find matching socket wrench for them, slip the Allen keys inside the hex socket and split the end (hacksaw) so it can't get out through the hex side. -Then just get a piece of square stock that fits the square drive snugly, a piece of round stock that's slightly thicker (than the square stock), not much, and then drill a round hole through it. -Put the square stock in the hole, peen the round rod over it (or add a pin) then attach the two hex drivers on the square ends. That's how i did my Allen wrench for my car many, many years ago when all i had access to was a drill press. Works just as well, and, it doesn't require you know how to weld, neat first project too. Worked really well for 7 years until i lost it and made a new one by buying two Allen T wrenches (all metal, one piece off eBay), grinding the handles half way, then welded them together in to something very much like what Tom has and polished the welds. Looks pro, looks factory. I was bored. :)
@jeffryblackmon48468 жыл бұрын
You are always doing something interesting. This is no exception. Thanks for the all your presentations. There is a lot to learn from you!
@mtericktucson8 жыл бұрын
Tom, I'm a diesel mechanic. I wonder if the speed nuts we use would be a way to mass produce these, You are on to something here for sure. These speed nuts typically crimp onto sheet metal for example, a mirror on a big rig. I thank you for the post, your channel takes life to the next level. I'm a fan for sure! I hope to make it to the Z bash next year. I live south of Tucson, so it is an easy day drive for me. You guys are great!
@dejanira28 жыл бұрын
The priority mail box ideal is great. I live near a convention crating company and have built many projects using the free wood they put out for the public. As for holding the shape, I think shaving off 2 layers of 3 ply would hold it together just fine. I have come to look forward to your interesting projects that have always been enjoyable!
@swellwelder8 жыл бұрын
I personally love this kind of demonstration. Back in high school physics it was the highlight of the day when we had hands on lab demonstrations. Much more interesting than all the book learning stuff, although through life, the book learning stuff has been more useful!
@Hangar18Fabrication8 жыл бұрын
Great episode Tom. I really enjoyed the fastener testing. I used to make cold header tooling for the fastener industry, and I am still fascinated by fastener technology. And, you are absolutely right. . .it can be a very complex equation! Throw some shear loads in there with the clamp load, along with some vibration, and it starts to get really crazy. It's akin to tightening a very, very stiff spring.
@mxpimp478 жыл бұрын
Good content as always Tom. I had a gentleman roughly 73 or so years old who packed up a radius attachment for my Hardinge HLV-H lathe in a pine box similar to what you did. Worked well, it was 1/4" ply screwed together though. I have since thought of the same thing when I ship heavy items in the flat rate boxes.
@eformance8 жыл бұрын
Glue and staples is a good choice for the box. An alternative is to do tab-n-slot corners with a hole down the center that you can push some bailing wire or a long nail down. Rabbets in the top and bottom would help to prevent lozenging of the box, add glue and you probably have more than double the strength.
@jerrywells43808 жыл бұрын
Very enlightening! Always enjoy your ingenuity. That little test really shows the capability for the Mini Pallet holding power as well. My vote for the box fastener, goes for the tie wraps, not only for the strength but resiliency.
@ericallen10458 жыл бұрын
I love when you test things like that. So often I find myself wondering is that enough strength
@ziggfreud98208 жыл бұрын
That test was awesome!! Love how you set it up, taking into account what happens if it fails, all the supporting gear has to be above the clamping force including newly tig welded eye hole. Very cool!!
@keldsor8 жыл бұрын
Hi Tom ! I send you a little sketch of a proposal to the handle ;-)) Impressive that small eye-bolt you just made !
@LarryDoolittle6 жыл бұрын
Nice test and your right so much strength!
@FredMiller8 жыл бұрын
Great test with surprising results. Very entertaining AND educational. Thanks for taking the time to put it together and show! Fred
@silveradoman2988 жыл бұрын
Really enjoyed the test Tom. Thanks
@gwood648 жыл бұрын
Very interesting and enlightening video as always. Keep em coming.
@PMPCMining8 жыл бұрын
Awesome video Tom. It has always amazed me of how strong something small can be when used properly. As far as your box liner go's. Keep it simple, if you are going to have them cut out. use one mortise and Tenon for each side just to lock the pices together. Packing tape or fiber tape would do the rest.
@bensthingsthoughts8 жыл бұрын
Good !! Very good !! I loved the test procedure...
@OldIronShops8 жыл бұрын
meet test but you know we were all waiting for the destructive test
@ScoutCrafter8 жыл бұрын
Awesome Tom- Hey if your looking to make some quick $$$ forget the box liners and weld up some of those nifty Oxtool lifting rings and sell them in sets of four... Cha-Ching!!! 😃👍
@gtmcfar8 жыл бұрын
Very informative video, Tom. Thanks.
@davidwright45418 жыл бұрын
I am more than impressed with the weld ability of the eye bolt you fashioned. Great test! dkw
@yosmith18 жыл бұрын
Always a learning lesson watching you video's, Tom Thanks for sharing!
@DonDegidio8 жыл бұрын
Tom, Nice experiment. Would be interesting to see if the bolt stretched. Maybe do another test off camera, measure the length of bolt before and after.
@ExtantFrodo28 жыл бұрын
Always love test and measurement. Great video. Like it very much.
@QtmMtrlzr8 жыл бұрын
Awesome episode! Love that you took the time to setup the test apparatus. Keep up the good work Tom.
@JoggingWithForks8 жыл бұрын
Love your videos! I have learned so much from watching you over the years, stuff I use on a regular basis building model engines.
@danbentler97428 жыл бұрын
Tom Looked up clamp force vs torque of fasteners. I remembered from previous lookups on subject it is fraught with uncertainty. Yes there is a formula where if you know torque and bolt dia you can calc clamp -- IF -- you have a good value for K factor. Remember torquing method for the turbine at Trojan Nuclear Plant. Studs had heaters in them. At temperature the nuts were tightened and then heaters turned off. A related tangent? Last week in my Weird Science kids and I took a piece of line (1" nylon braided). Let them try to pull my truck over a curb - did better than I thought. Then had them do tug of war to attempt breaking it. Tomorrow we tour a wire rope and rigging outfit and they will take their rope and break it for them Dan Bentler
@Lonczakt8 жыл бұрын
Very interesting! Thanks, Tom!
@aserta8 жыл бұрын
For the wooden box, you need the plastic panel holders that are used to hold partitions in offices. They have straight holders (to tie two panels end to end) but they also have 90 and 45, now, the 90 is the kicker and it comes in various thicknesses. I used this to make a 40 by 40 by 40 box (HDF walls) that was used to cast a block of concrete. After the concrete had set, the box was used to move the cube around (so you can imagine how strong the deceivingly weak looking plastic was). I don't know under what name you'd find them in US but by telling you that you'll find them in the trim department, that should be enough.
@kellysampson59848 жыл бұрын
Hi Tom, That's great watching. Thanks M. K.S.
@mikenixon91648 жыл бұрын
Tom I liked this test tested a lot higher than I thought. keep the videos coming!
@maxrunout29898 жыл бұрын
Great, video, Tom. I enjoyed the analysis of the fastener preload. I have had to make box liners like that on occasion. They take time, and you never have just the right material. I would be happy to pay a few bucks to have them ready made. As to fasteners, nails are hard to beat, especially for a guy who has as many hammers as you.
@briantaylor92668 жыл бұрын
For your box liner, I would use rabbet joints. Cutting the joints is well suited to production, far faster and easier than box joints. The end pieces would have a rabbet on each edge. The side pieces have rabbets top and bottom only. The top and bottom have no rabbets. The end user binds the box together with fiber reinforced tape, supplied with the kit. Those that want belt and braces can put a bead of wood glue in the rabbets before taping.
@robertvanhoose24378 жыл бұрын
I'm thinking a simple box joint-style tab and slot for the corners (with only 1 or 2 tabs) would prevent the side pieces from sliding past one another. Then a pre-formed sheet metal or plastic corner that would slide over the assembled pieces to keep them in square, plus provide reinforcement against blows to the corner. Then some double-sided tape pre-applied to the perimeter of the top and bottom to seal the deal. IANAPE (I am not a packaging engineer).
@briantaylor92668 жыл бұрын
I like the tab and slot idea from the strength perspective, compared to rabbet joints. CNC would work, but that's slow. Maybe template routing? Tom will have to weigh strength vs production time, since the production time is where the real $$ are.
@briantaylor92668 жыл бұрын
Maybe Tom can select his preferred options and some of his woodworking viewers can test them.
@tek48 жыл бұрын
I live that you used nylon webbing, we call it mule tape, and use it for some conduit pulls. electrician here. keep up the great work
@jimnutzman86378 жыл бұрын
I enjoyed this video a lot!
@brosselot18 жыл бұрын
Great video Thanks for sharing. I have a background in Structural/Mechanical Engineering and I'm always amazed just how many bolts or lack of bolts to make up a steel connection. Thanks Tom. James Greene will love your box inserts BOX in a BOX.
@matter98 жыл бұрын
pretty neat! when you get more tech than just the straight up machine work, as the more specialized the work become the more interesting the tips IMO. Thanks for the video!
@randallparker84778 жыл бұрын
In kind of the same question, "someone" used "standard" grade 8 bolts and nuts on the turbine casing of a steam driven fire pump on board a navy ship. When the turbine got up to temp and speed, the bolts started getting loose and some high pressure (450lbs) steam leaks were witnessed. After shutdown, hammer wrenches were used to tighten them. When testing at temp and pressure after that, the bolts started popping and shooting into the overhead and ricocheting around the space, not to mention massive steam leaks and a rapid rise in temperature in the space. #1 - wrong bolts and nuts for the application not to specs, #2 - retightening while the fasteners were still hot "bad practice". #3 - the supervisor told the "someone" to do as he said. It was quite an exciting experience for several "someones" that day for sure.
@GnosisMan508 жыл бұрын
I really like that grinding wheel rack. I need one myself though I might make it out of wood instead. Thanks for sharing Tom.
@Keith_Ward8 жыл бұрын
Great experiment Tom, I love things like this. I prototype things like your grinding wheel rack all the time. I usually start with CAD and move to paper or wood models before transition to metal. I typically use a box-in-box method when shipping items that are heavy or fragile so this seems like a good idea for folks who don't have the ability to fabricate or cut materials themselves. Folks who know how to pack a heavy box for shipping are a rare breed, tape and Styrofoam peanuts won't cut it.
@scottsession77898 жыл бұрын
Thanks, I enjoyed the video. Scott
@jeffmoss268 жыл бұрын
great video as always Tom!
@jcs63478 жыл бұрын
Great video Tom! I loved the testing and discussing your thoughts on how you were going to accomplish it, thanks.
@lwilton8 жыл бұрын
Wheel holder: attach some sort of bail rod that you can snap through the wheel centers and keep the wheels in place if the holder is tilted. Then put a suitcase or drawer handle on the back side, and you can grab the thing with one hand and carry it over to the grinder without worrying about dropping wheels.
@dennyskerb49928 жыл бұрын
Hey Tom, so much information craned into 30+ minutes. Luvin it. 👍👍
@oxtoolco8 жыл бұрын
Wait a second. No smart assed answer from Dennis? Somebody must have hacked Dennis's account. Thanks for the comment. Cheers, Tom
@jusb10668 жыл бұрын
Abom needs a new chuck key, i think you owe him one (that works) tom....
@JohnRysdyk8 жыл бұрын
Pin nailer. for the boxes, used them till the glue set up, then couldn't remove them, had to cut them off. Worked wonders on my riding car build. 18 gauge nails 1.5 inches long. Plus you confirmed my choice of track bolts. Thanks
@JonRUpton8 жыл бұрын
Tom, for your box idea, try dry wall screws. They are cheap, easy to install (just pre-drill) and they should be strong enough. You could also glue the edges and bottom for more strength. The wood will fail before the glue does. Thanks for making the entertaining videos!
@AmateurRedneckWorkshop8 жыл бұрын
Very interesting. I have sometimes out of necessity used fasteners that I thought were too small, who knows maybe they were just right. Keep on keeping on.
@darinspicer13018 жыл бұрын
great stuff Tom! Keep the video's coming.
@ls20050192278 жыл бұрын
Great video content Tom! I actually watched the crate/bolt stress tests first, and came back to the ML103 to get some of the discussion behind the tests. Thanks again!
@JohnBare7478 жыл бұрын
Good test Tom, a good bolt holds it's own.
@samdevault78258 жыл бұрын
I enjoyed the show Tom. By the way, I really liked the grinding wheel stand. I wish we'd had something similar in my tool grinding days. We used the peg board method and the wheels seemed to always be nasty when you picked one off the board. Of course 10 separate grinders put off a lot of airborne grit that has to land somewhere. Cheers, Sam.
@travisshrewsbury71698 жыл бұрын
I was waiting to get the shit scared out of me when it flew apart,damn good video Tom, I see Robin is paying attention
@HolzMichel8 жыл бұрын
hi Tom your solution for the grinder wheels is a pretty good one. i would be so bold to suggest to use wood for the slotted part of the carrier. you run a risk of chipping the wheels on the steel when inserting them into the carrier. also if the carrier were to get an axial jolt, the steel can create a hairline fracture of the wheels that may not be visible. on your pull test, i wonder how much deflection that there was in the part where the screw head bit into the steel. Stefan Gotteswinter did a video on vise deflection and i did one as a follow up to see how much that a machine vise will deflect under an everyday workload. it was actually quite an eye opener. when the shim stock came out of the joint it may have been due to deflection of the part more than the screw actually stretching although that may have been a factor. one way to tell for sure would be to put the screw in a thread gauge (one of the tuning fork type). permanent deformation would manifest tself in the threads i would think. thanks for the food for thought cheers mike
@phooesnax8 жыл бұрын
Interesting stuff Tom thanks Jim
@raycurren36398 жыл бұрын
Hi tom. Love your vids and book. Can't tell how much I learned you mentioned truck bed liner for you disc holder. That stuff is very expensive. I would try rubberized undercoating. Good stuff at a fraction of cost. Thanks for sharing your knowledge.
@ROBRENZ8 жыл бұрын
Hey Tom, Great video and test! On the pull test I would have put the shims from the side of the block so they were directly under the head of the screw. On the calculated force value the coefficient of friction used in the calculation has a great affect on the answer. Just changing from the 0.16 value I used for both the thread and thrust face giving 2196 lbf to 0.15 giving 2324 lbf is 128 lbf difference for just a 0.01 change in Coefficient of friction. On the box liner it would be immensely stronger if the side plates were the full box height and the top and bottom plate nested inside the side plates. This keeps the side plates from being able to pushed in. Also suggest making the side plates all identical length so one end of every side is supported by its neighbor. Then 4 additional pieces maybe 1" by (box height- 2 plates) long that sit in each corner to keep the top and bottom from collapsing in from top load. ATB, Robin
@chrisstephens66738 жыл бұрын
I suggested that about the shims but was poo-pooed.
@ROBRENZ8 жыл бұрын
No, it was in Toms previous video "Etching press vertical supports Pt2"
@craigsbully8 жыл бұрын
Thank you for remaining free. I have both your books and enjoy th channel. I have a machine shop in my basement and making a few buck because of you and other creators. Craig. Btw: I am so jealous of the job you have at Berkeley labs. It is my absolute dream to work at a national laboratory.
@Skraap8 жыл бұрын
Oh boy Tom. You promised the Internet breakage and you didn't give us breakage.
@robgerrits40978 жыл бұрын
Easy way to secure parts in boxes is to wrap them in bubble plastc, tape them closed and put in the box. Then use a little bit of expanding foam to connect everything, also to the sides of the box. Quick and cheap! Nice test you showed us, very unexpected to see. Keep them coming..thanks for sharing.:)
@1pcfred8 жыл бұрын
The trouble with expanding foam is knowing precisely what that little bit is. People manage to blow their walls out with the stuff. So a cardboard box doesn't stand a chance.
@Hunter3334448 жыл бұрын
Good video I'm always getting clever ideas from you I like the hex wrench and the removable vise idea is nice for a small vise . The wood inserts for a priority box would be very handy to have I have made quite a few of these myself and get very annoyed taking the time to do so Thank you ..greg
@superiorshooter8 жыл бұрын
Very fulfilling episode of Meatloaf. Tom, I got the meat sweats from all that knowledge.
@graffix908 жыл бұрын
great idea with the box for the joints good old fashion duct tape plenty strong for the job.
@petek2108 жыл бұрын
Great video, as always. A simple tongue&groove joint with a friction fit might work for the boxes. Fast and easy to machine and possibly reusable.
@thedrubaru8 жыл бұрын
You could cut vertical dados into the long sides of the wood pieces that the shorter sides can slide into. They would keep the shorter sides from falling into the box and would also allow for shipper to create a more custom fit to the piece that they are shipping if they wanted to. You could also include a little tube of glue, similar to what Ikea packages with some of their hardware kits, to make it even stronger still.
@mattym88 жыл бұрын
Great stuff!
@xull1x1238 жыл бұрын
i love this stuff, more practical testing please!
@marcaitkin76538 жыл бұрын
Great video Tom
@FastEddie0070078 жыл бұрын
It is amazing how far you will go to satisfy your curiosity. Me, I just overbuild everything.
@michaelyopp42368 жыл бұрын
I like this type of video. I learn from them
@Hardturnin7 жыл бұрын
Nice idea to store the grinding wheels ours are in the drawer under the Grinder's working wheel in a space behind one storage door. It is full of wheels that do not like to stack up right. I like the liner idea yet to be honest if I wanted to ship such items as you have mentioned I would be inclined to make a wooden shipping box myself.
@billlee53078 жыл бұрын
Great Meatloaf! Shipping box inserts are a good idea. I wonder if they could be glued together quickly or even bonded to the box. Also thought that a cross wrap with filament tape might be enough to hold the pieces together and get them through USPS's package grinder. I like the file handles! I hope that Wesley will offer these for sale. I had to make a lot of parts out of phenolic and came to dislike the stuff. At the end of the day I would be itching and have skin reactions. It was like working with fiberglass insulation! Anyway, good luck with polishing it. Micro mesh is a great product. I very much enjoyed the 10-32 screw experiment. When you asked the question I thought that it was a hard one to give a single value for and expected that a range would be more realistic. Many thanks!
@armchairmachinist24168 жыл бұрын
Yeee Meatloaf !!!! I'm happy :)))))) I was looking for info on KZbin about grinding wheels classification and what I could find was " there are two types of grinding wheels, aluminium oxide and carbide, in different grits" and that's about it. Since you have there a nice selection of wheels nicely coloured, and a book to, would be a good idea to beat this subject about grinding wheel types, colour coding and where and on what to use them on; something like , do I use a aluminium oxide wheel to grind aluminium? , what to use on HSS steel, what on cast iron .... and stuff like that. Nice set up to test the clamping load . Thanks. Bobby
@Gary32478 жыл бұрын
The simplest method for constructing the wooden box liners is to place the sides into the box & then glue or hot melt triangular strips into each corner. Very stable..
@thedge78 жыл бұрын
Been building a box-inside-of-a-box for shipping for decades. I couldn't imagine paying for the parts... However I also generate a lot scrap plywood.
@stanwooddave97588 жыл бұрын
Hi Tom, great video, great content. As an old Body & Fender guy, when you started reaching 1500 - 2000 Lb's, I actually was backing away from the screen, in anticipating shall we say not good things were about to happen. I could always tell when I was at the maximum with the 3/8 inch chain I was using, by just hitting the chain (maybe 1/4 oz of pressure / swing) and how the chain would sing like a wind chime does. You went a lot further then I would have. Be safe in the shop. :)
@mg-shop69968 жыл бұрын
Very interesting and with practical value.. May not satisfy theoretical engineers or lawyers, but for man-on-the-wrench utility this is useful. It's going in my notebook. Thanks! - M'G
@Rocky12347328 жыл бұрын
Great video
@oaxelo18 жыл бұрын
Very interesting. And yeah i was expecting that lockwasher/hook to deform more or even break.
@johngalt92628 жыл бұрын
Interesting. thanks for sharing.
@peterbaynes58048 жыл бұрын
I enjoyed that Tom, a good range of content and entertaining as always... keep it up. The bolt test was interesting and informative... I realise there are all sorts of theoretical considerations and calculations but really a "practical" demonstration such as yours gives more than enough information and guidance for application in a home shop/hobbyist setting. I haven't been through all the comments but perhaps cable ties (zip ties) would work for the box in a box?
@johnjohn-ed9qt8 жыл бұрын
For the box, maybe notch and key the edges if the boards, basically single finger finger joints. When asssembling, A strip of duck tape or fibre packing tape around each axis of the flat rate box would likely do the job. You could also kerf-key the edges (saw kerf normal to the surface, but with a but with a bottom at 45 deg to the surface) so when assembled, each edge gets a triangular key to support it. Tongue depressor stock works well for this. No glue needed, but much stronger if glued. One of two each edge should do. If the edges are straight cuts only (likely given your price point) it gets tougher.
@marklatham56928 жыл бұрын
Tom. Great content, always thoughtful. I kept waiting for the destructive pop at the end ... I was thinking that the box could contain dadoed edges, this would give you options. Nailing. Narrow crown staples. Banding. Nothing. I'm partial to banding (even stranded packing tape!). But it should hold its shape/size. The edges would add extra operations which would be more expensive to produce. So there's the trade-off. Your final comment on monetizing is pertinent to where the channels have been going recently. You seem to be swimming against the current. Good show.
@bulletproofpepper28 жыл бұрын
Great info. The web straps are like a spring and will store energy I would like to see you use a anchor point similar to your test block on the other end. Your web strap looks deferent then the ones I use. Thanks for sharing.
@Stephen14557 жыл бұрын
The packaging idea is brilliant, you would be taking care of 2 problems, shipping and scrap.
@scott_aero39158 жыл бұрын
Nice work Tom, I was hoping you'd rise to the challenge! :)