OXY 5 HF | Overview and Flight | Aaron Wolf

Hey guys! I hope you enjoy my presentation about the new OXY 5 High Fidelity edition.
For more information visit: www.lynxheli.com

[@Thrust40]

Hi Aaron, why did you choose the 500KV instead of the 560kv Scorpion? Thx for short answer..

[@AaronHeli]

You can also use a 560kV Motor of course. :) I chose it because I am flying it already for a long time in different OXY machines.

[@Thrust40]

@@AaronHeli Thanks for answer :-), in the Kit comes the 21/22 Tail Pully, the Manual says 19, which should i take? Headspeed 2000-2500 with RT610mm..

[@AaronHeli]

@@Thrust40 for this headspeeds take the 19t at the tail please. :)

[@Thrust40]

@@AaronHeli ok thanks alot, the 19T is the one from the normal Kit, looks other then the original in the Kit, it's not closed from both Side.. It should fit but it's open to one Side... Is this ok?

[@AaronHeli]

@@Thrust40 Its just a different look. Both versions work perfectly. :)

[@user-lw2hs7qs4b]

Hey buddy so what’s the problem with the regular oxy 5 is it not strong enough Or did it have some type of defect for the average flyer

[@AaronHeli]

Hey buddy, definitely not! The normal OXY 5 is really perfect. This special edition just was made because Luca (the owner of OXY) always wants to improve things...even if they are perfect already. :) So no worries. The HF Edition is just a limited edition with some additional upgrades.

[@chansakseyla1579]

what is the best setup for 12s HF ? hardcore 3D My equipment that I chose Motor Egodrift ESC Hobbywing

[@AaronHeli]

Hey buddy, I can highly recomment the Scorpion HKIV 4025 520kV and the Tribunus 130A II for 12S 3D. :)

[@chansakseyla1579]

thank you