P-47 Thunderbolt Advanced MiniArt 1/48 - Aircraft Model

[@normanbakker3587]

This isn’t model making, it is a true piece of art! The attention to detail, the 3D printed add-ons the weathering, the wiring. It is a class of its own. Amazing. Thanks for sharing your expertise. Best regards Norman.

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤

[@verjiniamilanova3107]

You always make more simple models look realer than real! It's amazing you're a master at this!

[@idaemonplasmo]

I must disagree. 🤔 This kit was quite detailed and complex, so I only painted it and made some minor improvements in 3D. 😅

[@ValkyriesMoon]

​@idaemonplasmo so skilled and humble.

[@YuriDoesStrikeball]

​@@ValkyriesMoonlisan al-gaib!

[@seanberry1]

@@YuriDoesStrikeball the voice from the outer world? :D

[@aserta]

@@idaemonplasmo I have to disagree on principle. Doesn't matter how detailed a kit can be, if the person making it isn't able to put it together in a coherent manner and with an advised mind. You have the precision, the dedication and the outlook necessary to take a good kit (like this one) and make it far more than the sum of its parts. I've seen enough models to know that you're one step away from masterpieces. The kind of stuff you'd see in old museums. Also, those "minor" improvements are far more than just improvements. They took the kit from great to chef's kiss. Top work.

[@silentbob8635]

im just gonna say, when you cut out that star over the ammo trays, and then put it on the cover absolutely perfectly, it damn near brought a tear to my eye. You sir are a true master of your craft!

[@eapleitez]

I was holding my breath!

[@johndesalvo7738]

@@eapleitezwe all were!!😂😂

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤

[@baronvr]

Yeah, but I don't understand why he didn't put the cover over the trays beforehand, put the decal on, and then cut it out ?? Way less risk after the decals have set and are dry.

[@johndesalvo7738]

@@baronvr first rule of watching Plasmo. Never question Plasmo. 😂😂

[@xXatomic2009Xx]

I can't be the only one who would watch a livestream of Plasmo just building a model kit?

[@toober1066]

It's downright ASMR. Beats the hell out of the news.

[@christopherbedford9897]

Livestream? So you have a week to spare? 🧐

[@xXatomic2009Xx]

@@christopherbedford9897 lol, not like a start to finish stream, but maybe a part 1, 2 and 3 etc.

[@johndesalvo7738]

People watched Bob Ross, People would watch Plasmo! They are very similar, nice pleasant voice, takes ordinary and makes it extraordinary, and does it with such ease.

[@xXatomic2009Xx]

@@johndesalvo7738 Exactly!

[@hansdijkstra5814]

👍 Why is it that I start to shiver whenever you say: "Some Minor Modifications"?? 🤣

[@rockstarJDP]

You must be a brain surgeon outside of your hobby, how steady your hands are never ceases to amaze me! Excellent work as always, you're a true artist!

[@beanhavok2287]

That thing belongs in a museum!!!! Dr. Jones.

[@renefischerbr]

A real masterclass on how to build a model kit. Congratulations!

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤❤❤

[@makimaki500]

"A few wires" for spark plugs 😂

[@idaemonplasmo]

18-cylinder, so only 36 wires. 😅The b29 was slightly harder, with 144 wires for spark plugs.

[@makimaki500]

@@idaemonplasmo 😧

[@timothyfulkerson6785]

I'm debating on doing it for my 1/48 b25

[@michabartoszek2834]

Yeah, I do love his "minor improvements"! 😀

[@makimaki500]

@@timothyfulkerson6785 good luck!

[@Gunni1972]

Congratulations to MiniArt. That's indeed a VERY nicely detailed kit. And to PLASMO: You have outdone yourself with that engine and cockpit. Never have seen such details on this scale. Overall, i think, one of your best models so far. I think it was very wise to not overdo it with oil and soot stains. LOVELY!

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤❤

[@TheGrouch2000]

I had a flashing glimpse a few days ago that I might take up the hobby. I saw a few 'basic' build vids & then I saw this vid. Of the scale! Patience, attention to detail & focus is just insane.

[@josvansantvoort4337]

Even when I see it I can hardly believe it, what an incredible talent...I can never reach this level. Great to see you at work. My compliments with a deep bow.

[@oxcart4172]

Thanks

[@davidpowell6098]

Your work gets better, and better with each model you make, absolutely stunning, David.

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤❤

[@АлександрКацубо-р1о]

Преклоняюсь перед Вашим мастерством . Супер реалистичная работа , ювелирное исполнение мастера. С большим уважением из Беларуси.

[@GhostRider247]

only 2 words can describe this !!!! " JAW DROPPING "

[@jmhub1979]

Every David video I watch I think to myself this is at the higher end of my skill set. But I could probably pull this off. Then I watch the other 33 minutes in awe, thinking there is no effing way I could do that.

[@joshuamurphy4928]

He likes to give us all a few minutes of hope before is smashes our hopes like a wrecking ball.

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤❤❤❤

[@jaycarter4904]

I feel the same way. Until he takes 5he sprues out of the bags.

[@DAVINCIEVO]

PLASMO videos are always quality guaranteed. Dude, what a scale modeller.... and what a nice guy!

[@hattrick8684]

Man you never cease to impress. That 3D printed plumbing behind the engine is pretty OP. I’ll have to invest in the hardware/software for that when the kids get a bit older.

[@WillyBillyBoy24]

I was already inpressed by his work. Now this video shows how you can be good at something and keep getting better

[@douglasalan5783]

I always love David’s “minor modifications.” 😊

[@joshuamurphy4928]

Like a surgeon saying he is going to do "a little" brain surgery today.

[@douglasalan5783]

@@joshuamurphy4928 yes!

[@JBG1995zgz]

This is the best kit in 1/48 that i've seen. Outstanding model and craftsmanship. Congratulations!! 😮

[@sarundayo]

PLASMO should have his own Model Company 🙌

[@andrewdenzov3303]

Nah. Did any mortal dare to try achieve same level of perfection in building such model? You can be sure that level of detail will be over any unreasonable amount and skill set needed to made this model will exceed skills of all Greek Gods combined😂

[@jakubhermann5961]

Yeah, that's right. He would produce so complicated model kits, that only he would be able to asemble them 😉

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤

[@jeffallen3382]

Wow! Glad you made this one 1/48 scale to show off your talent David!

[@wikuscarstens5264]

" I do not know what to improve" and spends whole video improving. So much love, thanks Plasmo !

[@scottgoodman8993]

Magnificent. Pilot figures bring models to life.

[@mikebaginy8731]

What a fabulously built model, Plasmo! I've photographed the beautiful P47 "No Guts, No Glory" during air shows at Duxford, UK a few times. A beautiful plane!

[@stephenmiller195]

Me too, she is a beautiful thing

[@hotelcharlie-six5408]

Looks like the real thing - totally amazing! Best P47 I’ve ever seen!

[@angusmackay7281]

Your work is always a wonder, David, I've been watching your channel since you started and I don't even build models. I just come to admire an artist at work.

[@markc7002]

Your attention to detail and skills with a fine brush are astounding!!

[@Jarigarcia69]

I love your work, I could watch your videos for hours and hours and they still surprise me. Apart from what I learn from watching you, I appreciate that you show your techniques that inspire many of us, thank you Plasmo!!!!

[@shelby383]

Superb. Thank you. I have seen some modellers complain about this kit set, not you. Very well done.

[@mister_fjk1972]

This is your best model IMHO - WOW!!!

[@peterjozsef448]

This might just be one of the most impressive things you’ve ever built in my opinion, well done 💯

[@JohnQDoe-ut3jj]

Once again you have demonstrated that you are a master modeler extraordinaire. Your build is phenomenal with details off the chart! Keep videos such as this coming. I tip my hat to you fine gentleman modeler.

[@billyponsonby]

Your Blender designed and 3D printed parts are mind boggling. Superb dedication.

[@TheRickWillett]

Best video introductions in the business, hands down.

[@agracer1000]

For the under wing formation lights, paint silver, then a clear red/green/blue (whatever color), then the epoxy clear. It will look more like the colored light is under glass. Fantastic stuff as always.

[@dn8276]

Chlapíku, já s modelařinou nemám absolutně nic společného, ale na tvou práci se tak nehorázně dobře dívá, že se pokaždé hrozně moc těším na každé další video, protože je to vždycky naprostá pecka.

[@idaemonplasmo]

Tak toho si moc vážím. Vždy jsem rád, když video a má práce osloví i lidí mimo modelářskou komunitu. 🫡

[@dn8276]

​@@idaemonplasmo netuším čím se živíš, ale doufám, že neděláš kardiochirurgii, protože s tou neskutečnou precizností tvojí práce a smyslem pro detail bysme byli za naprosté amatéry 👍😀 Já si tvoje videa pouštím před operacema, protože to člověka vyklidní i před těžkým výkonem a je to pro mě parádní relax od napětí... Tak prosím natáčej, natáčej a natáčej, protože vlastně pomáháš zachraňovat životy 👍😀 Díky moc a respekt 👍

[@johndesalvo7738]

He says not a very precise fit, then proceeds to fit it precisely! Thank you Plasmo!

[@coletoliver3977]

You have inspired me with the P-51, this thunderbolt, those 190’s and that 262, most recently finished that he 219

[@1musicsearcher]

That turned out incredible! I’m glad it wasn’t a complicated kit.

[@pc44pilot94]

Wow, I’ve come to expect nothing less from Plasmo and he delivers again and again.. Plasmo Sir, thank you, you are the model master…

[@GenHummel96]

This cockpit controll panel build was AMAZING! I mean, the level of detail is insane, if one realizes that the whole thing is smaller than a average thumbnail 😮🙏

[@stevenpuderbaugh821]

I can hardly believe this is 1/48 scale! Your hand is so steady in applying paint and stains. The result is impressive, and you should be proud to have produced not only a model worthy of museums, but one that sparks motivation in others. Your video is also a master-work, from the introduction, to the narrative, and for the fine photography. Did I mention the excellent background music?

[@oxcart4172]

As usual, a total masterpiece! And she was based about 35 miles from me-at Duxford. And if u are even slightly interested in aircraft, you go to that place!

[@ph0n1k]

In a body of work as great as yours, this is one of my favorites. The additional printed engine section is just sublime.

[@andrewhull7296]

Well done! I really enjoy watching a fello model kit builder put their love and dedication to detail in their builds. 😊

[@MarianaSoares-nx2fh]

kzbin.info/www/bejne/q6ClqZSFfLp5j80si=i5i1IArEiq31VNdp ❤❤❤❤

[@pauly7218]

This might be one of your best builds. The 3D parts you made took this to a whole other level. So, how are we coming on a fire truck build? LOL....

[@CarlosEMFerreira]

I found myself holding my breath during the sequence where the star decal gets applied on the wing, cut in place, and the off-cut is applied to the separate panel. Really Brian de Palma-tense stuff.

[@JackRoadkill]

This is possibly the best build video I've ever seen.... You're an expert, sir.

[@yeahnah6468]

You are a master of your craft. Genuinely, a Master. I've been watching your work for many years now and this one is on a whole new level of impressive. Thank you for presenting it for us.

[@johnfrancisterne1072]

This is something ive always wanted to build from scratch, so seeing you do this just warms my heart and inspires me to keep going

[@AlexanderTartmin]

Nice job! You never cease to amaze us!

[@mrananas233]

Excellent craftsmanship. Always looking forward to your next project. Thank you.

[@stealthbomber2127]

And the Artist makes yet another masterpiece. Incredible!

[@curlyexcile]

Great work, now I'm going to jump into wolf pack campaign DCS from reflected, jug life.

[@Modellbauer403]

Respect to anyone who can make such beautifuel models!

[@jerryvolpini7987]

"No Guts, No Glory", pretty much describes your modelling perfectly, lol 😉 Another great job! I really found your more subtle approach to weathering on this build to be very pleasing to the eye and more realistic. Still, you managed the subtle variations in colors and tones that is typical of an aircraft that has seen flying time and been exposed to the elements. Amazing result! 👍

[@GIGJO-r2r]

Ich bin einfach sprachlos. Wie gut Sie Modelbau umsetzen! Großer Resoekt vor Ihrer Arbeit. FRAGE, was gaben Sie noch zusätzlich für den Bausatz gekauft? Haben Sie die Motorteile selbst über CAD und dann über Laserdrucker gedruckt ? Beste Grüße Günni

[@alexanderakh4955]

Потрясающая модель, прямо шедевр получился.

[@peteradshead6566]

I thought it was impossible to improve on perfection and then you do exactly that!

[@norbykarger4244]

The amount of effort you put into the engines on these vehicles always amazes me, and the weathering stage of your builds is always my favorite, really places the model in reality.

[@motorTranz]

I can almost hear that engine starting up! Excellent work as always David! Thanks for sharing this!

[@keachsterz5183]

the photos at the end makes it look like you took the real thing and shrunk it down. amazing work!

[@DaysOfSail1850]

She is a beautiful model,darn nice job!

[@markshellard5894]

A true master craftsman in the hobby down to the finest detail

[@hjagger]

Another amazing job. Nothing like some minor improvements.🤣🤣

[@guidosarducci3047]

I'm blown away. Thanks for posting another excellent build. Thunderbolts are one of my favorites.

[@MastinoNapoletano420]

David, amazing work as always. It would be nice to see you do a diorama for this one. It truly is one of the best P47 kits out there. Hope all is well and thanks for sharing!

[@idaemonplasmo]

Great suggestion! I will probably make some easy airfield diorama.

[@1BCamden]

Wow David, your very best work to date, definitely a watershed moment for KZbin and this type of undertaking.

[@ETKSauron]

You are a master builder...I love the time and detail you put into these! Fantastic work!

[@garthbarrett6067]

Amazing that you used blender to create the parts behind the engine. I have tried to use blender and bow to your mad blender skills. Kudos.

[@tomasgaal1197]

Jedno z najlepsich videi, dlzka, strih, hovorene slovo....fakt pecka! 👍

[@paulmaul2186]

Saving this for later so I can enjoy it with a coffee.

[@tabletasgard1205]

Your work is combination from crazyness and perfection joining into some kind of art... Really unbelievable!!!

[@zulerodoeht329]

An absolute masterpiece, a true work of art. A great video.

[@oliverknowles6864]

Wow 😮, you took a quality kit and made it extraordinary, the printed parts you added are amazing.

[@tesarus8461]

It is so nice to see subtle weathering! Amazing as always!

[@idaemonplasmo]

Thank you very much! Yes, sometimes heavy weathering is not a good idea. 😉🤔

[@trydrew]

​@@idaemonplasmo no soot behind the turbo charger exhaust though? Its the opening in front of the rear wheel. The other openings in front of the wing root are the wastegate openings. Great build though, and i love your added bits. Well done as always.

[@adrianschapendonk5912]

I need a biggest monitor to see all the details! Superb!

[@dourmoose]

That instrument panel is amazing.

[@gailuron76]

Pffffff 😮 incroyable, l'art poussé à son paroxysme, une master pièce ❤

[@riccardorostagno2728]

Un altro capolavoro…… che dire , sei il migliore modellista del web , bravo , bravo, bravo non ci sono parole per descrivere quello che fai !!!!!!!

[@gamershd3020]

it looks just great, a diorama would still look even better

[@MrZeke701]

I like the way the rivet detail comes out.

[@tomoram8431]

Mate, this is a superb demonstration of your skills. You've inspired me to get back in my studio. Excellent work my friend.

[@karenburns3516]

I have watch your builds from the very start on you tube, you have given me some much pleasure with your amazing skills and builds thank you.

[@sandrito28]

Ty si už iný pán....jak si ten model navrhol potunil.....brutálny zmysel pre detail....klobúk dole Davide......robíš krásne modely.....😮

[@stephenbridges2791]

Very nice job. That looks to be a very well designed model. It's nice to see someone step up and give you all the details in one kit.

[@ajaxinfinitum5604]

This is a master artisan, period! Thank you for sharing the fractal of god you represent. God bless you and yours.

[@paullomax-u2u]

Simply amazing a true master of the build .David you've done it again they just get better and better

[@hendriktabak7036]

Just amazing. Pure museum quality in great detail, just as good as your video skills! Love it!

[@eliadelucchi5455]

that's got to be the best model i have ever seen!

[@dota9280]

As always you are a step above all the other modeller .

[@brianquinlan8891]

Nothing much to say other than this is fantastic work, I have this kit and am excited to get it looking even half as good as what you have shown us here!

[@Onatyrade]

Probably the worlds greatest modeler

[@Palaemon44]

Yes, and what cinches the title for him is that if you take into account how many models he does, he also appears to be able to do these in much less time than other master modelers.

[@glennhaley7404]

Absolutely mesmerizing watching your skill.

[@lewistaylor1965]

I went to subscribe...but found you can't subscribe twice...These videos are among the best modelling videos I have seen

[@miromiroo2415]

Ďalší nádherný model a perfektné video. Krásna stavba, obrovský cit pre detail a obdivuhodná trpezlivosť. Bravo! 👍👏🤛

[@mattgbarr]

It's been awhile, but it was worth the wait. This build is beautiful and your talent is top tier.

[@19-models2]

The work of 3D printer is also good, but after all the plastic model is the best. Thank you so much every time.❤