P0016, p0018 , frs , brz, camshaft correlation

[@ricardogamez4765]

Buanas Tardes Amigo. Mi BRZ 2015 tira el codigo P0016 el diagnostico dise Crankshaft/camshaft correlation sensor Bank 1 Sensor A. Hicimos pruebas de diagnostico resulta que los sensores estan bien. Tengo que cambiar el sprocket? Saludos desde Tijuana.BC

[@djsonic_pr]

tengo el mismo prroblema . pudistes arreglarlo>?

[@Morphvalley_Reptiles]

Do you have do to the Cam gear replacement often on the motors? Should show how the R&R of the Cam gear itself

[@dimitarchardakliev5351]

Did you manage to fix it? I replaced one of the camshaft sprockets, all of the AVCS solenoids and a new timing chain kit. The issue is still present.

[@Morphvalley_Reptiles]

@@dimitarchardakliev5351 strange, I had a 0018 code, swaped my sensors out from left to right, same code so i replaced that side cam gear and it fixed the problem.

[@dimitarchardakliev5351]

@@Morphvalley_Reptiles That's the thing, the issue was gone for a month but now it's back..

[@dimitarchardakliev5351]

@@Morphvalley_Reptiles Did you replace the cam position sensor or the crank position sensor, or both?

[@Morphvalley_Reptiles]

@@dimitarchardakliev5351 avcs camgear/ time chain sprocket

[@2jzs13]

Muy buen videos 👌

[@djsonic_pr]

tengo el codigo p0016 que puedo hacer>?? los sensores sirven pero no se como arreglarlo

[@jeremiahbalete4628]

Did that fix the P0018?

[@noemenjivar113]

Why is that? that you had to replace the gears and the ECU I have my Impreza with p0016 only?

[@Bryans_s14]

Yo le cambie el motor a mi carro 2015 subaru Impreza fb20 y me sigue marcando crankshaft y camshaft position sensor A

[@jaimegrullonsanchez7138]

en ese caso pueda ser la computadora ,talvez.

[@-zde-pigeonsack2577]

hola tengo un 15 subaru impreza codigo p0016 ,le cambiamos el timing actuator ,chain ,tensioner y guides. todavia el mismo codigo y el carro no tiene fuerza.q puede ser

[@239dc5]

la computadora tambien tiene que ser reempalzada porque tiene que aprender los nuevos timing values

[@cervandomondragonrealtor1643]

Cuanto cobra por un trabajo como eso?

[@90each7no]

I have a P0018 code as well, and replace the sensor but the light came back on.

[@harshabandreddi2632]

90each7no same bro, I replaced the sensor still came back

[@90each7no]

@@harshabandreddi2632 , my code came ON at 74,xxx miles. How about yours?

[@ManuelXx8xX]

Have you guys had any luck? I got the P0018 code at 55k miles on my 2013 Scion FRS

[@90each7no]

I got my code off already. Make sure that you use your car for what it is. If it's a sports car try to make sure that your inputs as a driver is to drive it as a sports car. I was at a point not pushing my car and that's when the code came on.

[@ManuelXx8xX]

That's good to hear. You're right I have never really pushed my FRS either. How did you get rid of the code?

[@Unforgiven300]

Is it the same for the fa20dit? Es lo mismo para el fa20dit?

[@tonyargo853]

What's up guys, good video I recently got p0014. By chance do you know if this is related to that code?

[@brayanquesada3528]

Hermano me puedes ayudar con un FB25 que estoy teniendo problemas

[@izzyrodriguez8056]

Cual es el problema

[@brayanquesada3528]

Tengo el código P0011 y P000A

[@brayanquesada3528]

P0011 SUBARU - Intake Camshaft Position Timing Over-Advanced Or System Performance Bank 1

[@izzyrodriguez8056]

Tienes q cambiar los intake sprockets, y si es brz tambien la ecu