P0137 & P0606 fix | Toyota Rav4 | Oxygen sensor DIY | Engine Light+4WD+VSC lights on

[@richiesyt3492]

Thank you for showing me the way to easily access this sensor and replace it. I have learned something that may come in handy. Apparently even after replacing the O2 sensor you may get a P0138 error months later. So I found a YT video by a member named Voltage Drop Diagnostics and the video is simply named “06 Rav4 P0138”. He knows what he is talking about, watch it. To simplify the DIY stuff, the part number is 234-9041 also by Denso on Amazon and costs around $50. Note: If you do not have an Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set, it is worth the $20 because if you are going to DIY this, it is a tight sensor to get to that you can’t even see so get it to save yourself the aggravation and time messing with it. I get no kickbacks by recommending any of these items, I have learned to get the right tools or just pay the insane $$ to have it replaced. Hopefully the O2 will be all you need but you know how it goes…….

[@geeksauthority]

You are welcome, Morgan.

[@rodolfocandelario1323]

Thank you so much I was able to fix my rav's problem with your video, everyone said it was the computer and it was the o2sensor, thanks for your great help, no more code.

[@geeksauthority]

You are very welcome and thanks for your kind words and don't forget to subscribe :) . Planning to bring some more videos to upkeep our RAV4,

[@lickwidgoat3480]

P0606 on my wifes rav 4 says a freekin computer or something and all the lights come on vcs and engine light and the trac control, were do you get a o2 sensor from? As the fix i mean?

[@geeksauthority]

@@lickwidgoat3480 I got Denso 02 sensor from Napa I believe ( it's a common brand used by Toyota itself )

[@lickwidgoat3480]

@@geeksauthority i ment the diagnosis, not the part

[@geeksauthority]

@@lickwidgoat3480 OBD reader showed the error code - if that's what you're asking.

[@lickwidgoat3480]

@@geeksauthority ya but my obd2 says its a computer the p0606, i hope its a o2 sensor that would be ez!

[@brettsullivan7462]

Thanks for sharing. I was able to get my vehicle fixed following what you said. I subscribed, thank you.

[@geeksauthority]

Thank you Brett, glad that it worked out for you.

[@11misiek1]

klucz pokazany na początku nie był mi potrzebny przy wymianie, wleźć pod spód trochę mało miejsca ale da radę, oczkowym kluczem trochę chemii profilaktycznie, złączka przy kolektorze w mojej była a nie we wnętrzu, uwaga na wodę(w dołkach)na drodze!!, wkręcić na pastę ot i cała polityka ,toyota rav 4 usa long.

[@richardlewis7471]

Very nicely presented video. Thanks for posting.

[@geeksauthority]

Thank you so much, you made my day :)

[@GCLehman]

Do you know if it is basically the same process for the 2008 V6 RAV4 Sport?

[@geeksauthority]

Sorry for the delay, exact same process.

[@101christi101]

Hey were you able to fix this on your 2008 Rav 4?

[@101christi101]

Is this 4 cylinder or 6?

[@nehulbhambri7372]

it is an anti-seize copper compound.

[@geeksauthority]

Yes! Thank you for sharing

[@HB-yq8gy]

The P0606 code is for ECM/PCM Processor. I just purchased a new O2 sensor hope it clears the P0606 code & P0138. Auto mechanic said P0606 ecm is bad new O2 sensor will no fix the problem. Thank you for the video. I hope mechanic is wrong.

[@geeksauthority]

In my case, it cleared the code and for last two years, vehicle runs absolutely smooth. Wishing you the best. Make sure to disconnect battery and such before working on it.

[@HB-yq8gy]

@@geeksauthority Thanks for update. The 3 idiot lights just went out. CEL,VCS & 4WD. But always return. The new O2 sensor comes in today. Hope it fixes the problem long-term.

[@geeksauthority]

@@HB-yq8gy Waiting to hear back. Make sure to hook up to reader and see the exact code.

[@HB-yq8gy]

Interesting, I just hook up scan tool P0138 & P0606 still shows up even though clear on instrument panel.

[@geeksauthority]

@@HB-yq8gy I would disconnect battery for 15 minutes, drive it for 20 minutes and then try. Sometimes light goes off but the issue will be still there. This way you can make sure you got it right

[@smooveb191]

thanks for the video is your car 4or 6cyl?

[@geeksauthority]

6 cyl

[@smooveb191]

@@geeksauthority thanks i have a 4 cyl and i hope its in the same spot . they said bank 1 sensor 2

[@geeksauthority]

@@smooveb191 I think it should be the same location. It's easy to figure it out, just crawl under it (be safe) and see where that sensor goes in. All the best.

[@smooveb191]

@@geeksauthority i ordered the part from amazon i will try it this weekend thanks for the info.

[@geeksauthority]

@@smooveb191 All the best:)

[@libertyisnotfree9146]

You should be careful not to touch the sensor with your fingers or get any ant-seize compound on it. It can cause the sensor not to work. It is very sensitive to oils and other substances.

[@geeksauthority]

Totally! I am careful not to touch it once I read your comment.

[@crosbykabir2418]

pro tip: you can watch series at kaldrostream. Me and my gf have been using them for watching loads of movies lately.

[@bishopcedric4395]

@Crosby Kabir yup, I've been watching on kaldroStream for since november myself =)

[@elijahowen1727]

@Crosby Kabir Definitely, been using KaldroStream for since november myself :)

[@jamesray3920]

Anti seize cream that what it called

[@geeksauthority]

Correct :)

[@11misiek1]

sonda denso 1 rok i błędy . raczej toyoty oryginalny polecałbym

[@yasindawood3496]

I have my ABS / VCS and traction light one. But not engine light. But I do have. P0606 code

[@geeksauthority]

You may need to check the error lights in manual.