P0843 Honda Pressure Switches and Transmission codes

Follow on instagram
/ handy_man_eddie
Evan"s youtube cannel: / @justcallmeeddie1
Like and subscribe for more informational videos from Transmissions America.

[@RicAr-ml8nu]

Things like switches/ ligtb bulbs and associated wiring get loose due to very bad pot holes on the streets. Just to avoid being scammed by auto shops, make sure to check switches wire connections. Carefully disconnect and reconnect them. Carefully because these are quite fragile. Once reconnected, power the vehicle and see if the d light still flashing.

[@bdm408]

I have noticed that my flashing D will show up when I go into pot holes but I thought I was trippin! Thanks for confirming this, now I know to check the wiring as well 👍

[@gareysmith1510]

Thanks for the education, it was very helpful, wish more people would do that.

[@eronrice]

Thanks. You make fixing cars easy and understandable.

[@marc-oliviercarier18]

Changed it myself on my honda fit 2007. Thanks for the infos👍

[@joeghost05]

If by any chance you remember, before fixing your car… did your fit have the “D” for Drive in the dashboard blinking?

[@marc-oliviercarier18]

@@joeghost05 yes

[@alfredsilver8566]

Totally awesome very informative thank you!!

[@johnandeddie]

You are so welcome!

[@g-oneshayari3593]

I am very happy with your clear voice I can also understand a little English. Thanking you.

[@johnandeddie]

Thank you! 😃

[@dalyop5493]

Thanks for the video.

[@user-ni4zw1gx7w]

I'm going to change mines today. Do you recommend changing the fluid too

[@juanvalentin4249]

Thank you for the video. They need to be oem or aftermarket is good?

[@stevesmith8248]

Very good video. Thanks a million. U just save me some time. Thanks again. Keep up the good work.

[@johnandeddie]

Glad it helped, thank you

[@demarcthomas4961]

I’m having a P0777 code because my D indicator light is flashing.. Is the the switch I need?

[@megeorge4128]

Thanks for the video. Would like to know if my Honda has 5 gears, then it will have 5 switches?

[@johnandeddie]

Most have two or three

[@robertomijango6207]

THANK FOR YOU TIME AND EXPLAIN

[@jonathanalfredoraimundoram7247]

Hello i have a p0845 code should i replace pressure switch for 2nd gear and the 3rd gear?thanks

[@isleofmann1088]

I suggest that you replace the whole set. Prevent you from having problems in the future

[@sohaiinthesky]

I wish KZbin would allow me to like this video more than once lol. So here in a like and aa sub instead

[@EricGeneric0]

hi, i have p0842 honda pilot 2011. fluid sensor switch "A" do you have a video for that?

[@johnandeddie]

Not at this time. I believe on that model it is in a solenoid pack

[@ericmadx3063]

I got a 03 pilot i dont have any codes but when i go over a bump at low speeds 20mph it disengages from the gear but will engage again when i come to a full stop it happens sometimes but never on high gear on high speeds

[@johnandeddie]

Check fluid level

[@bresteto]

I have D blinking with VSA light on together! Any ideas? Thanks in advance

[@johnandeddie]

Scan for codes.

[@503Char]

Could you tell me what is tha part Number For Honda Fit 2013, Transmission Fluid Pressure Switch A 2nd Clutch. P0843 Code is active in my car.

[@johnandeddie]

Do not have part number, try dealer

[@austinritchie4983]

hey just wondering what you’ve got back on this? i have the exact same code, i ended up getting a part but i think it’s for P0847 which is the 3rd switch

[@thunderchild321]

Trouble codes P2715 solenoid D stuck on..so now where is it and how to test or replace

[@adrianmoreno7333]

I’m replace mine pressure sensor top that drive light stop flashing after at week star flashing again

[@loopster40]

Does anybody know where the 2004 dodge intrepid se transmission fluid pressure sensors located?

[@johnandeddie]

Solenoid body on top of valve body

[@jacrispalacio2345]

My honda crv 1st gen.. when the engine is hot.. d4 blinks and it wont engage anymore.. I have to kill the engine and then re start .. then it runs a bit then des engage again... Already cleaned the solinoids .. replaced atf..

[@johnandeddie]

Scan for codes and diagnose

[@crackingentertainment8078]

I have HONDA ACCORD 2008 MODEL AND ITS GIVE ERROR P0842 AND P0843 .CAN YOU UPLOAD VIDEO OR ANY INFO ABOUT THIS. IT WILL BE HELP 4 ME A LOT TO UNDERSTAND THANKS .❤

[@johnandeddie]

Most likely bad pressure switches

[@Acordionista509]

How do you know which one to change ?

[@johnandeddie]

Research trouble code and find pressure switch identification for the trans or the vehicle your working on, thx for watching

[@selfis0007]

Presure switch A would be?

[@POINT187]

?

[@johnandeddie]

Locations vary depending on model. Have to look it up.

[@mohamedsatar1896]

Hello my friend, I have a 2020 Honda Civic that has a problem when you start driving at approximately 0.5-1 rpm. It starts to shake a little, and when the rpm rises, the shaking or trembling disappears. Note it has code p0843, transmission fluid pressure sensor/ switch 'A' circuit high Please help me to solve my problem 🌸

[@POINT187]

I'm having that's same problem and code

[@johnandeddie]

Possible internal trans slipping clutches of tcc. Check fluid level and condition.

[@CumarkingKingcumar-vi1ge]

Hellw

[@user-ni4zw1gx7w]

@jacobtaylor