P3220918

[@mohammadarshad3007]

Good, please shat or low volume of back ground sound.. Teaching way is good.

[@touseefahmad5486]

Good information

[@AZdirtdog]

Is the module compatible with a 12v Cummins solenoid

[@mainnetural3720]

In my generator only pull solined but not hold anyone can solve this issue Cummins DG 225 kva

[@richieuntaran8530]

Hi sir, this shut off solenoid 3 terminal how to connect in deep sea controller. Ty

[@denipurnama2659]

Selenoid untuk meningkatkan tekanan 60 newton apakah bisa?

[@Dragon-dragan]

How long the solenoid can be on? How many hours I can have solenoid with power ON ?

[@pjpowerinc]

With this set up the solenoid is in continuous mode until shutoff.

[@Dragon-dragan]

so my solenoid in combination with this module can work constantly. means it can work 12 hours or more actively without a problem. to hold one position and when I turn off the power to return to the first position. Thank you so much.

[@pjpowerinc.]

@@Dragon-dragan correct. It can stay on for 12+ hours if that is what you want

[@Dragon-dragan]

@@pjpowerinc. Yes . I want to put it on my tractor. when I put the key in, I want to activate the solenoid and activate the fuel supply. when I remove the key, the circuit shuts off and the solenoid returns to the first position and closes the fuel supply. that's the plan.

[@pjpowerinc.]

@@Dragon-dragan that should work as long as the key supplies the same battery voltage the the solenoid is using to the aux terminal to turn on and remove to turn off

[@jerryblankenship9908]

where can I buy that type of module

[@pjpowerinc.]

www.pjpowerequipmentparts.com/m7/S500-A60--s500-a60-trombetta-control-module-pj-power-inc-store.html

[@Yangar03]

Hey, thank you for explaination. I have my kubota fuel solenoild heating up to the point of smoking. Could you tell me what the issue might be?

[@pjpowerinc]

It is possible that your white wire is being energized to long. The white wire coil is a momentary coil only to be energized momentarily to pull the plunger in so the hold coil can keep it in. The white wire should only have power for 1-5 sec.

[@Yangar03]

@@pjpowerinc thank you for the response, then it seems that the solenoid is defective.

[@rajbeervirk8508]

@@pjpowerinc Hey, thank you for your video. I have another question, while using the module S500-A60 , Can I leave the jumper permanently between positive and auxiliary terminals?

[@marinosloumis]

What its this black panel???

[@pjpowerinc]

The Black Panel is a module to control the solenoid. It is manufactured by Trombetta and we have them in stock! If your interested in purchasing, give us a call or go on our web-site and order www.pjpowerinc.com Thanks - Pat

[@pjpowerinc]

The black panel I believe your referring to is the timer module that controls the solenoid.

[@arshedahpeerzada2769]

Sir repair this

[@pjpowerinc]

There is no repair for this, you would have to purchase new components.