TBS Tango II: Creating a basic model memory

[@hoverbotfpv1425]

Good to see you still educating! APM certainly is a painless memory now. LOL! Back to mini quad fpv no stormtroopers locking up rc pilots in Canada yet.

[@willay747]

Just got my Tango 2, thanks needed that!

[@NATGEOANDSTUFFPaulbrannan]

looks great the tango.bit gutted because we ordered module and couple recievers to start upgrading our equipment but been a month now and still waiting.tbs said can i wait till mid next month that will be allmost 2 month.cant track parcel courrier say they have no parcel.dont know whats going on at tbs but been promised every week and still no parcel.item says shipped along time ago so not sure.dont supose you know shats going on at tbs lee.i know people have ordered recent and recieved items straight away.even testers are getting theres and not me who they gave us great deal courtosy of gal kremmer but still cost alot.eventualy upgrading all radios and drones to long distance.we had to purchase r9 for now to try but need this tbs

[@MCsCreations]

It's the damn virus, dude. China's cities look like ghost cities right now. 😔 At least 3 factories had to stop here in Brazil because they weren't receiving stuff from China. 😕

[@rueda82nd]

Thanks for video Lee, my Tango 2 on the way

[@MCsCreations]

Great video, Lee! Thanks a lot! 😊

[@alicihangir7222]

do you have any videos for the beginners, drone 101. I am planning to buy a drone however too many options.

[@kaelstokes5804]

Do you think it'll be better off doing the dji hack for range on DJI System or using crossfire on the tango 2 pro?

[@Painless360]

The DJI hack will give you more FPV range, using something like Crossfire will also give you more control range.. Best of luck

[@trevorc6793]

HI, I received my Tango 2 pro and Im very impressed with it compared to the x-lite. Is there a simple way to transfer the model from one to the other that you know of please? TIA

[@Painless360]

Not that I have seen. Here's hoping that Opentx supports it fully soon... Happy flying

[@trevorc6793]

@@Painless360 super thanks. Is there any news when it will be integrated do you know?

[@GenesRCAddiction]

Very well explained and just taught me something new 👍👊👍👊 I discovered you can turn the brightness down to make it easier on the eye's and camera 👊👊

[@trevorc6793]

Thanks for the run through Lee, question. I've updated the Tango2 to the latest firmware/sd card etc. All went fine. I copied the models I'd setup back into the 'new' models folder on the sd card and they're not showing up? Any clues or tricks please. TIA Trevor

[@ak-lk2nq]

Hey.. i have brightness at 100 % but outside cants see anything without having to cover screen to be able to see alittle.. any solution ? Thank you

[@edoardociammaruconi809]

I think that this radio is way more easy to use that a normal open tx radio

[@dee1251]

I have a question when I tried to create a new model this error comes up scrip memory allocating panic error. what does this mean? I have been duplicating models and erasing them is this because of that?

[@jjkeaton7085]

Just got my Tango 2 out of the box and my inputs are throttle aileron elevator rudder

[@checkm8606]

Is is worth it to switch from the xlite s to the tango2? (I am a pincher)

[@Painless360]

It's quite a personal choice but I think that the Tango II is more comfortable for pinchers...

[@dahosfpv9954]

I set my radio default to AETR and every time I create a multirotor model through the wizard it assigns the mixer channels to RETA. Also if I modify the Model101 it reverts itself back to defaults later. Will be nice when we can use the OpenTX companion to set up models. I am ready for the update, hopefully it fixes these issues.

[@aerialhorizonrc7827]

I was reading Team Black Sheep Facebook group a few days ago and the person from TBS said OpenTX Companion is underway right now.

[@sncat]

use a polarizing filter to record video from the controller display.

[@srqcrna]

Can you bind multiple drones on the same model or do you need to make a model for every drone you use?

[@Painless360]

You could.

[@possible1337]

@@Painless360 How?

[@testtest7191]

Hi, Why does my Tango 2 pro remove my other models i created or duplicated?

[@Painless360]

No idea, I've never seen that. What troubleshooting have you already done?

[@dash8465]

I have a Tango 2 pro on the way... will I be able to fly all of my quads off of the same tx model like I do with my Taranis/crossfire? In other words, will it bind to multiple Nanos while in the same tx model, or am I going to be jumping from one tx model to the next every time I switch quads?

[@Painless360]

Yep, should work the same way... best of luck

[@chazecramer5997]

First thanks for all your work on the mixer screen it’s aetr how can I switch to tear

[@Painless360]

You can move the channels into any order you like model by model but if you want it to do that every time then look at the default channel order in the radio setup screens.. Best of luck!

[@fpvraver]

Very nice 👍 supper easy to follow I am a new subscriber love the direct easy approach.

[@Painless360]

Thanks and welcome

[@dkieng]

Great video and thanks for sharing. I just got my Tango 2 Pro and I updated the firmware to 1.2x. I can't get my channel mapping to work correctly in Betaflight. I have selected AETR1234 as my channel in BF and when I move my Tango 2 Throttle stick the YAW also moves with it. Anything else I need to do to correct this issue? I have no issue with my TBS TX micro attached to the back of my Taranis X9D but I can't get the Tango 2 to work at all. Thank you in advance.

[@Painless360]

The default channel order one the radio may have changed. Ypu can change it in the radio menu or use the other channel orders in Betaflight.

[@olivierf.4931]

Hello! I just got the tango 2. Is there something to do on the first power on so that it does not lock to a specific mode like EU for exemple? I don't want to get stuck with a low output power as soon as I start using it :-)

[@Painless360]

You can unlock it if you want to - team-blacksheep.freshdesk.com/support/solutions/articles/4000099976-region-crossfire-locked-no-frequency-selection-and-limited-power-selection-under-general-menu

[@olivierf.4931]

@@Painless360 that's great! Thanks a lot for the link!

[@GiorgioAlzora54]

hello, how do you delete one model

[@darshanp109]

IS THERE A VIDEO TO SET ONE UP FOR FIXED WING?

[@Painless360]

It's Opentx so check out my simple plane setup and.. Happy flying

[@stevanardilaacero4785]

Hola Que tal una pregunta como puedo usarlo para el head tracker?

[@Painless360]

Lamentablemente, esta radio no tiene puerto de entrenamiento, por lo que el seguimiento de la cabeza no es algo que puedas hacer con ella. ¡Feliz vuelo!

[@stevanardilaacero4785]

@@Painless360 Que tal si me compro un radio master pocket con módulo crossfire y se usa el puerto DSC para la señal Que envía el arduino?

[@Painless360]

Sólo necesitas una radio con puerto de entrenamiento. ¡Toda la suerte!

[@TERBANGFPV]

hi, what if i want to create 1 model for my simulator.. how to turn off the crsf radio? so that the tx doesnt get drained by the crsf tx..

[@Painless360]

Change the internal module to off in page two of the model memory?

[@TERBANGFPV]

@@Painless360 ah i dont see that

[@TERBANGFPV]

@@Painless360 i dont see it because it not there..

[@GeorgeCooper_LoneWolf]

Great info just what I will need cheers

[@sumanthbolisetty]

How to connect 8ch pwm adaptor

[@jwtfpv8957]

Can I output SBUS to work with Kopilot?

[@Painless360]

Yes it can. Please see my Crossfire series. It's all covered in there... Happy flying!

[@possible1337]

cant change between plane, delta and multi..

[@MarkJones-100]

Hi I’m new to Crossfire and open tx. My channel screen is different to all the videos I’ve seen. Do I just change them in model set up to match yours for a quad ? Mine is. Thr ch1 roll ch4. Pitch ch3. Yaw ch2. Thanks

[@Painless360]

That order you have is a common one and supported in Betaflight and iNavflight so you shouldn't need to tweak your radio. See my betaflight BNF setup video... happy flying

[@MarkJones-100]

Painless360 thank you. I did just change it in the model setup section to match yours. Will that work too ?

[@Painless360]

I change it in the receiver tab of betaflight.. see that setup video. Best of luck!

[@sumanthbolisetty]

How to connect an 8ch adaptor to tango 2

[@Painless360]

Not sure I understand the question. Which 8 channel thing are you asking about, specifically?

[@kydawg1684]

Good info....On my Tango2 I cannot save a duplicate model and successfully change the name. Seems my Tango defaults to the previous name. Anyone else have this issue? EDIT.... flakey firmware... sometimes it delays the name change and eventually takes it and sometimes the model changes back to the copied name. HEY TBS - please work on this, very annoying.

[@Painless360]

I am aware that there are a number of improvements to the model setup in the works. Video on that when it comes out...

[@hadeiy]

Mine was shut down suddenly when play with category

[@Painless360]

I don't understand the question but there is an update coming that will simplify a lot of the setup issues...

[@hadeiy]

@@Painless360 thanks for enlightment, i was wanted to explain that if i playing in model (especially in category in model menu) my tango just suddenly shut down itself and not restart

[@Painless360]

That is not normal... I'd get back to the person who supplied it...

[@codebluefpv]

How do you capitalize?? I can’t figure it out for the life of me.

[@Painless360]

It's something that is missing from FreedomTX (I am running v1.01 here). The original version of FreedomTX shipped with the radio also didn't have that feature and I reported it during the beta testing so I hope to see it sorted in FreedomTX soon. I am aware of a lot of work to improve model setup so maybe it'll be part of that future update... I'll be covering the changes when its released.... stay tuned!

[@codebluefpv]

Painless360 thank you! I’m not crazy