Just built one, works perfect. I added two large Orings to the T where the barrel rests. Prevents it from sliding off. Hands down best and most compact design. Thanks for the video
@jasonvanbui4 жыл бұрын
Glad you like it! You can also buy what they call a T saddle fitting that works perfectly to rest the barrel. I need to update this video
@arnelbalingit86052 жыл бұрын
Great video & looks very easy, thank you!
@michaelcardenas95666 жыл бұрын
I finally did it after watching your vid.. I am impressed of how sturdy and perfect for my gun.. not only that, it fits perfect in my gear bag.. hands down best stand.
@TCuv146 жыл бұрын
Small, cheap, and compact! Gonna make one of these! Thanks for the measurements and tips
@jasonvanbui6 жыл бұрын
T Cuv you'll like it! Thanks for watching
@martincastaneda7420 Жыл бұрын
Thanks for this always struggling to fill up pod between games and where to set gun. Going to make one today
@jsnedicor17 жыл бұрын
Just built this stad to your specs, perfect size and I like how it's just small and compact. Thanks man
@michaelcardenas95666 жыл бұрын
jsnedicor1 and sturdy!
@Travis_6616 жыл бұрын
Built one today fits perfectly in the gear bag.
@noyaeleven4 жыл бұрын
Built this just now, super simple and easy to follow, although you do say to use the 8 inch pipes when grabbing the 9s. I went ahead and had 2 spare elbows left and cut another two 1 1/2 pipes to fork the end of the stand so the gun doesnt slide to the sides
@pbfanatic138 жыл бұрын
This stand is awesome going to try it out this weekend. Thanks for the video!
@seanfro615 жыл бұрын
Perfect! Thanks for this video. Made it myself in under 20 minutes including cutting. Well done. One tip, thing to add: Maybe add a parts list to the description so people can get the parts quickly. Feel free to copy paste this: 2 T Fittings 4 Elbow Fittings 4 45 Degree Fittings 2 x 9" PVC 2 x 8" PVC 1 x 6" PVC 3 x 2" PVC 2 x 1 1/2" PVC I used 3/4" PVC, what did everyone else use?
@toxicwrex76085 жыл бұрын
Thank you my good sir I was wondering what size pvc pipe to use.
@stefanzomods5 жыл бұрын
Half inch pvc worked. Invert mini with 48ci tank fits good. The part where the barrel rests is the only thing that needs some innovation as it’s unstable as is. I cut a U so the barrel rests inside it
@Nightwing9783 жыл бұрын
Thank you for this I’ve built mines today turn out great!
@mikecastro21587 жыл бұрын
I like this stand! but was thinking how to go about putting other 6" in the rear to hold my mask without taking away the compatibility or making bigger
@BadBoon3134 жыл бұрын
Thank G big help
@48haburt5107 жыл бұрын
just built it came out great.Thanks...
@jasonvanbui7 жыл бұрын
Awesome!
@rexqtv73245 жыл бұрын
Just saw this now but I still built it and it looks beautiful
@the67chevynova3 жыл бұрын
just make 6 of these cam out great! thanks for the vid
@jasonvanbui3 жыл бұрын
Awesome 👌, enjoy!
@krazy-kpaintball71398 жыл бұрын
you should make neck longer and cut t in half and I put rubber in it so dont scatch barrel and so gun dont fall over I made one like huslte paintball but my neck is adjustable so if I want to test barrels at target to see which one more accurate for the gun. also they have form that goes over pvc I took flex seal and spay bottom of form so it won't slide and I put my dye stickers deadly wind sticker voilent sticker and sly profit stick and I spary painted it all and spary painted my paintball name
@krazy-kpaintball71398 жыл бұрын
+Bullet JVB no problem only thing I dont like about that cheap one is your nice gun could fall off wish I could add picture on here to show you mine tho I think I spent 25 but I made 2 cause I got 2 guns and about the size I bet mine 2 inches longer than yours mine flattens all the way out too I fit both of mine in gear bag but i got the planet eclipse gear bag
@milesoroads3 жыл бұрын
Just bought parts to do this in 3/4. Price has doubled
@jasonvanbui3 жыл бұрын
That's a bummer, I know materials after the pandemic has all gone sky high. Check out the price of lumber!
@I_Throw_Plugs2 жыл бұрын
@@jasonvanbui is that what this video is made from 3/4?
@jasonvanbui2 жыл бұрын
@Damon St. Louis HI Damon, yes 3/4, but you can use any size really. Just need to adjust the fittings.
@milesoroads2 жыл бұрын
@@jasonvanbui yup,used these about 4 times work great. Molded one with an upright and T to hold mask. I'm going to glue all except barrel flip up. Fill up with sand then put a hot glue plug to hold it in. Also these can be opposing and made into one.
@jasonvanbui2 жыл бұрын
@Miles O'Roads wow, never thought of doing that for stability. They make a T fitting that cradles the barrel perfectly, I just haven't had the chance to update the video to show it off. Glad you liked it
@anthonyzermeno44938 жыл бұрын
What size pipe did you use
@kevinbasmadjian51858 жыл бұрын
3/4
@DREKOWICK69Ай бұрын
just made one lads
@mavikmartin46588 жыл бұрын
By any chance do u live in florida
@ryanharris74334 жыл бұрын
Can u use 1/2 inch pipes?
@jasonvanbui4 жыл бұрын
You can but I've seen them done before and they do not look sturdy at all
@mathew-0074 жыл бұрын
How much does it cost
@MF-pm5dh7 жыл бұрын
it wont fall over if u push the top part?
@jasonvanbui7 жыл бұрын
The tank but will keep it centered but you can do 2 things where the barrel rest. Cut it in half so the barrel sits in the groves making it super stable or put the barrel through the circle while it rest
@MF-pm5dh7 жыл бұрын
PB Obsession shit as easy as that sounds a muh fuckas sucks at this Home Depot diy shit thx for the advice will try it out
@louiemvp8185 жыл бұрын
Is it good with a 50 tank
@jasonvanbui5 жыл бұрын
Yes, made some revisions to it since this was out
@riderfast34444 жыл бұрын
What size is the pipe
@jasonvanbui4 жыл бұрын
I believe I used 3/4 size
@ajnull61167 жыл бұрын
will yhis work with any gun? i have mini and etek 4
@ajnull61167 жыл бұрын
PB Obsession thanks brotha!
@ajnull61167 жыл бұрын
PB Obsession add me on facebook. aj null west virginia. picture with me and my gf. we are kinda muddy.
@getlost30944 жыл бұрын
Meh...seems flimsy. I like the triangle design personally. This design would be better if you used threaded connections in the front swivel so that they would stop the swivel from rotating forward more.