Brandywine (4th Gen Camaro Part 2 of 4)

This is my process in painting a candy from start to finish. 4th Gen getting Brandywined. Products and equipment will be listed below. Check out part 1 to see the prep and look forward to part 4 to see the finished job. Instagram paint_by_curry
MP235 sealer /MH284 hardner /MR188 reducer
Omni M594 silver basecoat / MR188 reducer
VWM500 midcoat / MR188 reducer/
MF01, MF02, VM4405 metal flakes
House of Color KK01 Brandywine concentrate
VC5700 clearcost /VH7795 hardner / MR188 reducer

[@rosscalverley2584]

Can someone please tell me why watching this from start to finish was so damn satisfying and relaxing? Your skills are next level sir!

[@mikejoe9121]

Because it’s a master class he gives you exact measurements and the finish product looks flawless Salute Cory 👍🏽

[@terrybroughton5098]

Good Lord that's beautiful!

[@johnweaver1198]

Because this guy is on point. Talks the right pace explaining his process..... Next level right here.....

[@SomeoneCommenting]

Because you see the sharp change from the beginning and the end product looks gorgeous. It's like when you powerwash a very dirty brick sidewalk.

[@shabeermohamed2193]

When the paint lays down like that with that shile it's smiles all the way, I love it, he is good, well done, Shabeer, south africa

[@ec53001]

I sat down and watched this from start to finish since I did not want to create any dust.

[@joenewman6494]

🤣🤣🤣🤣🤣🤣

[@miguelmorales6576]

Paint my Yukon pearl white but candy

[@nickalthouse1614]

Bro, ya got me . 😂

[@roguedobie]

😉

[@Steve-Z68]

I hope you wet the floor down first 😄

[@Pitsy]

That colour is.. I don’t have the word to say how amazing it looks…. Beautiful job

[@stevenrich1819]

You’re not a painter! You’re a Fine Finish Craftsman. Absolutely stunning work.

[@redbaron2448]

Why don't you put the candy concentrate into the interclote blender/ clear basecoat instead you put it in the clearcoat, what's the difference?

[@notnoel8904]

Amazing work! I enjoy seeing masters of their craft at work and I appreciate them explaining what, why, and how they are doing thing in the process.

[@jasonb7878]

That is the exact color I have been dreaming of since the 90s. Would pay to see it in the sun

[@markanthony3275]

It's nicer with a gold base...a much richer colour. Silver under Brandywine looks closer to candy apple. I looked at the thumbnail shot and thought it was a candy apple...or a car with only two coats of Brandywine.

[@dubthegreat9735]

My dream is to be a painter. Watching you lay down the material was bad ass, keep bringing the therapeutic content brother.

[@rat8356]

Get a job as a body shop helper..move up from there

[@JuarezDerrick]

My cousin started as a body shop helper for my uncle and moved up to painting cars and now he paints planes for Delta Airlines.

[@taylorc2542]

A dying art in an era of vinyl wraps. Well done sir.

[@Norcal1990]

fuck wraps they destroy your paint

[@fastlanejeeb]

@@Norcal1990 idk about that but theres certain results wraps just can't achieve

[@The_Beautiful_People]

I mean wow, this man made this look so easy to do. Applying so many coats without ruining everything is amazing and a skill few have. Fantastic job sir. The time spent doing every step perfectly will definitely be rewarding in the final result. Keep up with these amazing videos!

[@matthewvarnam4302]

He didn't record the hard part...lol....no it's a beautiful paint job.

[@jeremiahwasabullfrog8854]

Probably the best candy brandywine job I've seen I have an 87 Iroc I want to repaint in this color with gold emblems and gold wheels. This looks fabulous.

[@MH3GL]

That would look awesome 👌

[@gerardolopez5875]

This looks like just a candy red,

[@Whitening98]

Man I've been spraying for about a decade now and have only touched candy once. You make it look easy. Makes me want to try some candies

[@SOLDOZER]

Practice on junk yard pieces.

[@rgonzalez6735]

I'm a construction worker by trade and have no knowledge of auto painting!!! But I have an excellent eye for great craftsmanship ! BEAUTIFUL

[@MachineDr.]

That is a worldclass paint job. You can tell by how the beauty pops thru, even before the clear is put on. It has many more layers of depth than what you have already sprayed. Excellent job!

[@mikejoe9121]

My brother please give out info on your shop I need your help

[@deeznutzz8375]

Great Technique Brother!! . He’s explaining shooting panel in its entirety. This is done to avoid the famous tiger stripes. You can see tiger stripes on silver vehicles done by an amateur in the direct sunlight. .

[@flimmaytinstone8980]

I’m a retired painting contractor. Probably sprayed a million gallons in my time. Never painted a car. Im painting my old Chevy truck with epoxy primer and single stage acrylic. It’s white. If it looks half as good as that car I’ll be very happy. Outstanding work.

[@jimknarr4209]

You are an artist.

[@sipzter]

I used to prep cars for paint - sand, very light body work. I used to spray primers (lacquer back in the day) but never got anywhere near your skill. A master! Also, your explanations of what and why you are doing are also masterful. I really appreciate your art, your skill and your professionalism. Great job and I haven't even seen the finished product!!

[@RocktCityTim]

What a yummy result. So, new sales tactic for manufacturers - give us an option to purchase the car in primer only and then a $2K paint credit. We then combine that with whatever is needed to get a REAL paint job from a maestro like you. Yeh, that'll happen ... 🤣

[@johnhallock2713]

I had a 99 civic ex hatch painted in this very same exact color well twice i guess... lol funny story my close friend painted cars for yrs then ran a house oainting crew and painted it on side with no booth so he paints it & i stop when he wrapped it up and when im 5 min. Away theres massive rain cloud heading right for it while sitting outside & of course his phones not on him & damaged entire thing... it had all shaved handles & big godly rear roof wing as well as a hatch wing, but damn it looked amazing & sample doesnt do this color justic nor does video... it turned out badass but not after few yrs seems it started too fade almost like pink now if there's a way too keep it looking this way I'd do my truck in it also... As for this car damn nice job my friend it turned out killer no doubt...

[@sicks6six]

good video, showing and telling how to paint, I just watched a car paint video by custom z warriors and it was awful, from start to finish you could learn nothing, some idiot overdubbed the whole video with awful high-pitched music so it has to be watched in silence, keep making great videos that help people, this is a very informative video that will stop people making a lot of mistakes, a lot of people know the basics and can paint, its the tips and tricks that turn people into good painters,

[@luish777]

Glad brandywine is back I remember this color was a favorite of mine back in the late 80s looking at hot rod magazines

[@joenewman6494]

I have 89 Dodge Ram charger needs paint if I sell my house I’ll get you to paint it.🤣🤣🤣

[@TinHatRanch]

Should have painted the B pillar tuxedo black.

[@glennrussell3252]

This guy is different and probably the best start to finish paint finisher I've seen on this medium. I'm sold - subscribed!

[@z-hilly4419]

Motivated painters, true grit customs, pharaway painting, the gunman

[@juanitatoole9332]

Man you did your thing on that paint job that the 4th gen Camaro is looking great

[@bigsnooks5968]

I kinda wish you didn’t have to speed up the video.i understand the time frame,but you lay that shit down buddy

[@diegoduran2115]

Where are you located

[@rjensen6368]

Another beautiful paint job. Nice work.

[@iamacarnut]

Wow Very nice job...loved watching you work..been there and done that many times...BUT....your doing a 10 grand paint job and dust and dirt gets into the clear coat and base coat as you pointed out..Doing this quailty work..for over 50 years and had a shop doing just that kind of work...i just shutter and stopper watching just looking at your paint booth floor..i can just emagine what the paint stack looks like..Have you ever seen a paint stack fire...A close friend of mine had that same thing happen..it blew the walls out about and inch and a haft..the rain cover on the top blew off and landed a block away ..i bet you dont let your customers see inside your booth..NASTY

[@jasoncurry8059]

I don't own the shop, i just work here. Owner doesn't give a shit because it costs money and he doesn't work back there. I tried getting all the overspray off the floor years ago with scrappers, pressure washers and everything else i could think of short of a jackhammer. Change will come if i can keep this channel rollin like it has been lately. Thanks for the input and for watching!

[@MatthewScott]

Man you do some fine work. Beautiful color also.

[@johnnelson8956]

My first candy job was House of Colors, candy apple red on a 78 Corvette. I sprayed it using a Binks #7. That should tell you how long ago it was. We didn't have gravity feeds back then. I had to respray the hood because a horse fly decided to do a belly flop and then go on a nature walk. Turned out great in the end though.

[@ssoffshore5111]

Having done some DIY painting, this was a pleasure to watch a true pro! Well done sir!

[@rjack151]

Incredible work as always man, smashing on that 5700 like it’s nobodies business 😎🤙🏻

[@phillewis1768]

Damm that is a beautiful paint job!!!!! Well done sir

[@paintbykevin886]

You do some killer work, appreciate you taking the time to make the videos on top of you working your regular job

[@paintbycurry1531]

Thank you

[@PhillipHall01]

Me too!

[@albertvillarreal7422]

You are the best car painter I have ever seen

[@bighouse1695]

PbC, it looks amazing so far. I don’t know anyone that doesn’t like the Candy/Brandywine color. You usually don’t see it on a 4th gen Camaro, but I like 4th gen’s so it’s a great project to show. Great commentary and detail of what you are doing or mixing. Thanks for sharing!

[@adammancilla4774]

Could you give me the measurements to mix a candy pearl Brandywine over black base paint to mix them correctly and the air pressure if you can help me whit that

[@paintbycurry1531]

Candy over black will still be just black with a colored hue. You need to pick a dark charcoal type color to use or mix the pearl into the black. I've never done it as you describe "putting pearl in the candy to spray over black".

[@R.J.1]

Goodness. I recall the 90s when HOK Brandy wine and Root beer were the go to. Good video man, nice job on the instructions.

[@dp9948]

Beautiful work, what psi you spraying your candy at?

[@georgeshotrodbarn2113]

Thats pretty i used to like brick red candy. i was a teenager in the early seventies and my brother-in-law was a painter at a casket company and he had a 1971 Camaro we painted it four different times on Saturday at the casket company before he sold the car and went into the army but that was where i started learning to paint. casket colors were different than auto colors their strange colors.

[@Bayuhutamamotor]

Having done some DIY painting, this was a pleasure to watch a true pro! Well done sir!

[@fulltiltboogie5321]

Man…. Love your idk bro… the first video I saw from you was tangerine candy on the Camaro.. layer out like glass off the gun… looked like no need to cut and polish at all! You have a big fan right here now!!! Great work!! Next level skills!!! Keep the content coming !!!! 👏🏼👏🏼👏🏼👏🏼👏🏼

[@jimjones4678]

He made a huge mistake by starting in the center of the deck lid .now when you go back to the center of the panel to paint the other side .you now have an extra coat in the middle every coat makes the color darker .rookie

[@paintbycurry1531]

Ok buddy. I'll give you the attention you seek. It don't matter if you start on an edge or in the center of the panel, at some point your going to have to change positions and continue where you left off. That's why its called "overlap". Rookie

[@paintbykevin886]

Is it easier to spray the candy in the clear with it double concentrated? Also one more question, is candy easier in a Basecoat binder like DBC than clear

[@paintbycurry1531]

Its not any easier double concentrated. Only a couple colors I've been able to get away with it. I normally use it in DBC500. This is the first time i have put it in clear for a whole car . I'm going to give a quick explanation of this in the last video with this car. Thanks for watching.

[@Southernrefinish88]

So you didn’t clean all the kandy out of the top clear layer? Was your buffing pad red when you went to cut and buff it?

[@paintbycurry1531]

Explained in part 3 coming out soon.

[@FiddyAutomotive]

man i been watching ur vids every night all week and your damn good at what you do. as a 17 year old restoring my 2000 honda prelude ur vids give me motivation to go out to my garage and get the body of my car looking fresh again!

[@mikejoe9121]

Such an amazing job by the end you can’t believe that car was all primer you actually forget it was all primer

[@davidlyons8278]

You’re an outstanding painter……freaking outstanding color….

[@tonydiesel3444]

Them candy concentrates I see what you did there :-)

[@Matt_Heebs]

"Brandy, you're a fine girl, What a good wife you would be"

[@steviesf7348]

How do you clean that plastic shield over your face. Do you loose any visibility?

[@paintbycurry1531]

It has replaceable screens about the size of the main screen. I've been cleaning it with thinner on a rag between coats and haven't changed the screen yet. Mainly used with clearcoat. No real overspray from the base or sealers. Big job like this and it gets a little blurry half way through each coat of clear. Lol

[@rebugcustomfx47]

Damn I thought part 2 was the finish completed job because it look so beautiful shiny. Part 3 sanding everything down to do the stripe was painful to watch because the shiny candy was gone but it was beautiful again after spraying the clear. 😍

[@kevindoyle4391]

Wow, the contamination and dust in the paint is terrible for a pro booth. Great gun, but we will never see how bad the striping looks in the sunlight. Just like all the reality TV shows.Looks good on film until you see in person.

[@paintbycurry1531]

It is part 2 of 4. So maybe you should pay attention.

[@kevindoyle4391]

@@paintbycurry1531 Its not about how many parts you make the video into, its about your spraying technique so you don't see the tiger stripes under the candy.Show me that! I see this because I do pay attention.You only walk the candy and not the silver base...lazy form.

[@GrumblesM4]

I don't say this to many people but I like the way you spray. Your hand action and whipping is on point.

[@67polara]

Balls. Scares the crap out of me.

[@Medinabros2007]

Excelente trabajo en Candy 👌💯 saludos desde Honduras 🇭🇳👍

[@jessicanewberry5958]

How much candy concentrate is used on this job? Your paint work is Badass.

[@keremysmith6866]

i cant wait to re paint my bird im not sure what color ill go for yet but whenever it goes ls3 its going re paint lmao

[@keremysmith6866]

lol just figured id say to this comment its sadly now getting repainted by insurance lmao at least all will be well soon tho

[@bbb462cid]

sexy I said it and I regret nothing

[@alexalexalexalex7906]

Simply amazing,that car looks awesome 👍👍👍👍👍👍👍👍👍

[@gbrooks28]

you painted exactly how I would have. your panel division and walking the full length with your candy! the area we differ is your clear Coating, limiting it to 2 layers? wet sanding the 1st layer 8s risky to sand so close to the candy layer? personally I would have lightly sanded that 1st layer of clear then applied a 2nd layer and did my leveling in that layer, then a 3rd layer for the final coat. still so close to my style... solid skills!

[@paintbycurry1531]

Wait for part 3. Lol

[@leoalvarez4884]

Congratulations, that looks awesome 👌

[@furiousfifth5th]

Painters are basically Pacasso’s we take our work serious. Before we paint it’s a canvas we’re the artist. Great work 🔥🔥🔥

[@terrencebell7806]

That shitt look wet beautiful

[@RidgeRunner5150]

I'm not a painter but have two friends who are top notch guys that do some awesome work. This is a great informative video I stumbled across. Thanks for putting this out there.

[@kawasakiwhiptwo5821]

Incredible job. Beautiful color.

[@westfield90]

Why don’t you wear gloves? Just curious

[@paintbycurry1531]

If its the slightest bit warm outside my hands sweat like crazy in them. Can't afford to be dripping sweat on the paint. I wear as much protective stuff as i can without being misserable or screwing something up.

[@RGD-Audio-Repairs]

So with metallics... You want lower air pressure, and shoot it a little further away from the panel? Compared to shooting non-metallics? (im painting front bumper and front fenders for my car soon, and ive never painted metallics before). Its z168 / 4xu Metro Blue Metallic, and ive just bought a Devilbiss Dv1 with a DV1 B+ aircap. 1.3mm... To give me the best chance of a nice paint job :)

[@jsote003]

Awesome job. Would these colors and paints work the same on metal? I have a 71 Chevelle and would like that orange candy color you sprayed on the Camaro.

[@paintbycurry1531]

Yes

[@randybarnes6451]

This is so much information, great video and that color is perfect .

[@norseman5041]

Amazing skills, would you paint my Bike, I have new unpainted fairings coming here in the fall, it is a American made Superbike EBR 1190RX (BUELL). Originally only about 1500 bikes where mead, production started again this year.

[@kirk9899]

How much does a paint job like that cost?

[@sfunk6294]

AWESOME!! Looks spectacular!

[@mikehendrix6558]

Question for you. When spraying with fans in front of car and with items in between car and fans. Does the overspray get on those items? I noticed the fog is going across those items.

[@paintbycurry1531]

The overspray melts in as I paint from the back of the booth to the front.

[@mikehendrix6558]

@@paintbycurry1531 you didnt understand ny question. Thr car is in 1 place, the you have parts in front of the car then you have the fan. Ehrn you are spraying the car the fan is pulling the overspray from the car across the part you have sitting on sa2 horses. So the overspray will also land on those parts. That what im asking. Want it affect the surface on the parts that you have.on the sawhorses

[@jasoncurry8059]

It has no effect.

[@hasanceylan1986]

Bu boya nerede satılıyor. Türkiye'ye sipariş verirmek istiyorum.

[@davidmatias6239]

That color amazing

[@matthewvarnam4302]

That's one slick paint job right there.

[@juanmata2433]

Awesome job!!! I would love to be able to spray kandy every day! Collision world pays the bills but my passion has always been in customs.

[@paintbycurry1531]

This is still a collision shop first. I wish i could do these type of jobs all the time as well. Just fortunate to have a few lined up to make great videos with. The responses are amazing so thank you.

[@PhillipHall01]

@@paintbycurry1531 Thank You!

[@juanmata2433]

@@paintbycurry1531 the response match ur quality.. amazing work sir

[@robertosequoia]

@@paintbycurry1531 hola pintas en florida

[@gruponemesis]

its just paint bro....if it was so complicated then why is there so many junkies doing it? with that being said....looks fkn fantastic

[@TexasNEV]

Uhhhhhh LOVE that color.. Wow.

[@rodneyrtennis1279]

Hey...what's with the straight forward explanation on painting without the typical KZbin OBNOXIOUS BACKGROUND MUSIC🤷‍♂️

[@key0nkolors930]

what hoses connections do you use? fantastic job

[@paintbycurry1531]

They are RBL 1/4" connectors.

[@pheirphon4680]

Thanks. Negative charge vs positive charge combined and unicense.😊 Down drafts/Gravity forced and circulations.😊 You are the Negative charge. Ground yourself because truths doesn't need you hurting yourself or another. 😊

[@MarkK01]

Man I am jealous of these amazing paint jobs. I can't even get collision work done without the clear pealing away. I own a 2017 Ford Escape Titanium with Ruby Red Metallic paint. I was hit in the front fender and door so it was fixed but the damn clear is not sticking. Pisses me off.

[@PatriceBoivin]

For me this highlights what a lousy job auto manufacturers are doing with their new vehicle paint jobs. OMG. They spend millions designing a vehicle then they botch the paint job. WTH kind of marketing is this. But I know they're trying to save 10 cents here, 25 cents there... it adds up for them but makes their cars and trucks look worse than they could be.

[@kerrydevereux7798]

Beauty. Amazing work and finish…… surprised to spend so much on this generation of Camero , they were not that well known to be desirable for that model. But I’m sure the owner has his preferences . Next incredible mention is the fact you look like you just left a office meeting. No paint- encrusted fingers and every colour not the rainbow on your pants .?!!! Tidy work mean’s fantastic results

[@Superblackchiney]

The way you work is that of an artist. I'm just going I to this field. Mainly because I want to challenge myself spraying my vw polo 6r. Ita original color is flash red, but this candy red is awesome. I've watched all the video, but the parts ratio I didn't quite get along with some of the products you were mentioning. I'm an artist officially, but I want to learn more, especially ially in this area. I'm already rounded in my selected field. If you can assist with the ratio and products. I have a system but which is the best spraying gun recommended. Thanks in advance.

[@blessedjuggernaut]

If you're ever a famous KZbinr and have money and time to be charitable, my 2011 Crown Vic SAP needs a good paint job. It's white now. I think I wanna go back with teal and maybe add some wood paneling on the sides with pin striping to blend it in. My car has a lot of chrome. I want it to look old school. Like a 50s car.

[@oldguy7144]

I'm Canadian but if I was from California I would say this....Duuuuuuuuuuuude! I'm a retired painter/artist by the way. With the exception of an airbrush or touch up gun, I would rather just farm the base paint to you man. Hope you do well.

[@KING-FU]

Absolutely beautiful… and it’s not even finished!

[@jamessowder193]

I would've removed the bumpers and did them separate with the other side parts to get guaranteed full coverage with no thin spots. Definitely should've masked off inside the wheel wells so you don't spray your suspension or well liners. That's just me, to each their own. You're definitely doing a great job though. Using top of the line shit too!

[@ele_112]

Dose it make sense to anyone to subscribe and like a video before watching it?, the act of desperation is great on youtube, i've subscribed and liked video with out the content creator mentioning any like/subscribe and you know why, it's simply because the content was great and it sparked interest. Update: the video is well done and every step of the way is explained in detail. Liked and subscribed. Only wished you would put out more/often videos, there are other people (painting wise) on youtube that put out videos often and they do better regarding subscribers.

[@paintbydenn]

Love your work man! 💯 👌🏼

[@korn111685]

Not sure where you come from. YT algorithm suggested and I absolutely approve. No idea where you’re from but I’d like to send my 01 ram to you for paint. Very nice 👌

[@SoloAscent]

what did you do for door jambs?

[@paintbycurry1531]

Eggshell black (trim black) . Check out Part 1.

[@htdriver2012]

Beautiful color. I hope it's not going to have black wheels. I sure would love to have you paint my 98 Mustang GT. It's Atlantic Blue.

[@cj270268]

Hi awesome job. Can you please tell me what is the price for a job like that in us. Best regards from Denmark 🇩🇰

[@paintbycurry1531]

10-15k US dollars

[@elandusmay9685]

@@paintbycurry1531 Do you paint car on the side And can I get in touch with you?????