Painting a car with Standox Standoblue and extreme clearcoat

[@splash5974]

Another nice job! Very clean! I enjoy your vids

[@michaelmixon2479]

The gloss is incredible! Very impressive!

[@vasiliskaradimos]

Edwin...thats a mirror my friend!Well...all the prep videos was amazing but your paint videos are top of the top my friend!Your position must be only in the booth!!!

[@user-qh6jb8qx3s]

Good work! You are really professional! Good luck!

[@mirkoraccosta5849]

You are 🔝 bro!!!👍🏼

[@Brulserz]

Another insane job. Congrats!

[@Edinxg]

✌✌

[@babame2629]

Excellent job thanks man

[@agelomurgia4801]

good job compliments

[@mauriciolopez3672]

Nice job 👍

[@georgizlatinov5039]

That's a wonderful job my friend

[@anooppa3452]

Super painting

[@isaurovelazquez4687]

Super broooo!!!!! Excellent!!!! How many turns the fluid My friend!!!!!!! 👍👍👌👏

[@makeminealarge1]

Very nice

[@pasxalistrakas1161]

🙋hi my friend!!!👌nice jod!

[@tlabrc1989]

Job looks really nice,but why the open blend on the pillar?Just clear down to the end of the pillar at the base of the windshield.

[@phuly4589]

you can clear down the pillar and still keep the original color. open blend will lead to delamination down the road.

[@jakefriesenjake]

Damn. It's so smooth, I wouldn't even bother wet sanding and polishing it...

[@ARKOS323]

Not even close to smooth...

[@amadouthiam8549]

C'est cool et formidables

[@Imwright720]

Paint booths are so awesome. Did you see the vacuum it created on the plastic.

[@nadeemmajeed427]

It not the vacuum created it is charged masking paper stick itself with body

[@barneydog8479]

edwin have you done a vid on masking a door jam so you get no masking lines?

[@MrBombeiro11]

Great job and a beautiful car 👍👍👍

[@Edinxg]

Thanks mate!!!

[@mcqcjc8409]

HOW CAN U TELL WHEN THE CAMERA HAS LENSES WHICH DO NOT SHOW SUCH DETAILS - PROBABLY LIGHT AS WELL.

[@barneydog8479]

hi edwin just wondered what pressure your devilbiss clear coat gun is set at?

[@billthompson9595]

yes it is very well done

[@dzenanselman6585]

Kralj,kraljeva,,na jači si.

[@chidexkofi8789]

Job well done

[@stephanjagdt7293]

Mega meinen vollen Respekt

[@albertopintorchapa]

Muy buenos trabajo

[@user-rx1pm8lr2y]

Thank you, dear, from this article that the surface of the car has been cleared before the car paint

[@Rboling4199]

What’s your process to get the panels that sanded

[@mirkoraccosta5849]

Do you use only devilbiss for the clearcoat?

[@MrKiszoltan74]

good job Dude!

[@Edinxg]

Thanks

[@automotivebodypainttechnic5810]

Wow no fish eyes n wonderful orange peal

[@MBClassicssir]

Standox ❤

[@hcjuanito]

Excellent work but you maybe could to do the video more short if you edit it. 👍🏻👌🏻

[@annabellalawrence12]

dit is goed job. mooie

[@dariobossbananas1593]

friend and i work with the same paint and with the same lake first hand lacquer gun sata nozzle 1.3 first hand lac apply full pressure 1.9 and second hand apply 2.2 for the structure if you understand what I say! good luck in the future

[@ricardogallegos9021]

Por que al estar pistoleando no corta donde termina cada pieza? Exelente pistola

[@mrt6742]

Nice smooth finish.well done.could u tell us a secret about your gun settings please?pressure?

[@Edinxg]

Thanks friend, my secret is everything full open 1.2 tip t110 cap. But most important become one with you gun

[@josealves9699]

A médio prazo , o disfarce da maneira que é feito , VAI dar bronca , PELA CERTA ..O meu método , além de prático , É PERFEITO ....Abraços , de GUIMARÃES , PORTUGAL .....

[@jorgemelim7844]

Aquilo no video tudo fica bom, gostava de lá estar para ver aqueles disfarces

[@patrik3976]

Great video! But beware of using pure colour blender when blending dark color standoblue base. Refering to Standox TDS it´s not recommended to use for dark colors. (If bad luck, you can get milky streaks that will show thru clear at the edge of blending zone) If i blend dark colors, sometimes im not using colorblender at all (non metallics) and sometimes i tint the dark base with blender within the colormix itself...try it sometimes, works good especially on pearls/metallics! You will get a smoother softer blend.

[@georgizlatinov5039]

What air cap use for clear te20?

[@josealves9699]

Muito bonito , mas o disfarce mais à frente vai dar barraca ...É matemático ...O meu método de disfarces , é perfeito ...São muitos anos a assar sardinhas ...Abraços , de Guimarães , Portugal ...

[@thompall7969]

Wich clear coat is more rezistant to wash brashes,?

[@MrHotguy034]

Did you only put 1 coat of base?

[@bigjohnson4888]

실력이 대단하세요 ㅎㅎ

[@marijostefsncic1706]

Super Vorgearbeitet und Lackiert hätte in diesem Fall noch in die Vordere Tür leicht mit reingeduscht, damit es zu keinen sichtbaren Farbunterschied kommt. So kann in den meisten Fällen ein Unterschied zu sehen sein. Meine Meinung dazu. 😉

[@Robert-Olbrycht]

Perfect job but it is correct to stop the paint gun in the middle of the door?

[@Edinxg]

Thanks! Yes it is,when you stop at the edges you create build up and give runners👍

[@mcqcjc8409]

My Favorit Channel. 4 dni temu Thanks! Yes it is,when you stop at the edges you create build up and give runners👍 I GUESS IT IS NOT WHAT HE MEANT AND ON TOP OF EVERYTHING U STILL HAVE THE EDGE . WHY NOT DOING EVERYTHING I ONE PASS OR OPENING THE DOORS AND MASKING INSIDE. WHAT IS THAT MISERY ON TOP OF THE ROOF AND THAT SPRAY - CAN POST WORK?

[@MrKiszoltan74]

Yes. She spray paint fog on the door edge, and if been bit different of color, nobody will see the different. Thats why use first Binder. This is the best solution how will exectly same color the side parts!

[@clips65]

Dark colors never use blender, its just one more step too have a problem. Why leave the bumper, light, glass and rocker but remove the fuel door?

[@user-rs8mj8jh1w]

How many layers of paint? How many layers of varnish?

[@user-qs8dv8pt2x]

У нас такие цвета не размывают, тем более STANDOBLUEой))) Да и техника у Вас хромает, плёночки слоёв нужно сращивать, а не вливать...неруси!!!

[@sergodesign9227]

Я пол видюхи орал нахуя, нахуя такие паузы, нахуя туда полез, а потом мусор достаёт. Так с мс лаком нельзя работать, хотя нравиться полировать видать...

[@johntrol4494]

Chao you back

[@DesiJattUk]

Very nice how I can learn from you

[@haiderzaman8684]

I love to learn.. Can you please tell me what's the first thing you sprayed.. Before painting.. The spot

[@harryploegmakers5913]

Blender

[@user-qh6jb8qx3s]

You do not use the gauge (Manometer)?

[@CokeAndMeth]

Seems like it does not matter if the overspray is pretty hefty. Looks awesome!

[@mamangzondo2419]

What a nice job dude.. I learned something new from your videos But can you tell me what a liquid you put on the car before you put paint on it ? Ty and salam from Indonesia

[@balicea78]

He is using a wax and grease remover,or a water based cleaner,for waterborne paint.

[@FrostMageonu]

@@balicea78 i think what Adzanna is refering is the blender he applied before puting down the color. it's a blender you use when you are doing blends on panels.

[@balicea78]

@ David Rato I know I am aware of the blend prep aka wet bed but really not needed on such a dark color! I was referring to the way the panel is prepared for color..also did you see the comment I posted about his method for cutting the clear instead of clearing the whole pillar. Thanx

[@FrostMageonu]

@@balicea78 i havent,no. I thought he was asking about the wet bed or blender though

[@balicea78]

Why would you Blend the clear half way through the pillar? Rookie move? Then a few months later your blend will begin to show signs after the uv's attack it...

[@foshobear]

Nice job! But wont this wear uneven if you leave this untreated for a while? During the first spray you didnt cover the D pillar as much as maybe around the wheel, so there must be an uneven layer of paint on there. Looks awesome tho, cool V90!!

[@Edinxg]

There is the clearcoat blending zone,you don't wanne have that much there

[@foshobear]

@@Edinxg Thanks for the explanation, I was told by a guy at a firm about my own car having a rust bubble and he explained the same thing about the blending zone :)

[@tomaszdobkowski4428]

super

[@jesseambachtsheer1138]

Welke aircap zit er op je devillbis? T10? Super strak gedaan

[@Edinxg]

Thanks man!! T110👍

[@projotaaudia4b611]

ola qual tipo de tinta e primer voce usa

[@josephirey4660]

Did you reduce clear?

[@WTS999]

Goed gedaan, netjes dat je stopt met je blender tot bijna 't eind van de deur, de meeste baggeren er hem er daar vol in zodat die in kijk anders is. wat is je reden dat je de kleur met een sata doet en de blank met een devillbis ? Gr een Cromax-pro collega uit de Achterhoek.

[@Edinxg]

Hey collega,ja toch dat is de manier inderdaad, destijds waren er alleen nog sata s heb snel de devilbiss aangeschaft vind ikzelf toch een stuk prettiger spuiten.mzzl

[@gianlucamarciano3695]

Vincent van Gogh of the 21th century

[@hasolasas]

It's a great job but I would like to see the result out in daylight

[@jos1824]

sim bañarlo muy bien,pero yo no lo apuraria tanto,y la limpieza tendria que ser mayor

[@user-qh6jb8qx3s]

when first coat (base) are wet i think it was different color)

[@tutusuntoro8015]

💖👍

[@stevejanka361]

You are right Edwin that looks real nice and laser straight and dirt free. Looks great. Is that waterborne basecoat? If it is, that stuff works. Thanks and take care.

[@mrmuskey5202]

yes its a true waterborne base coat. Not something they started with solvnet base and tweaked to pass as waterborn.

[@andreygoncharov7437]

Как вас найти в контакте ?

[@tilc2k]

What was the last step did you do with that spray can and what's in the can?

[@Andrew.Prentice]

It's a blend spray for blending in the new lacquer/clear coat on to the old clear coat. Melts the 2 coats together and prevents discoloration, or shade change where the two coats overlap.

[@tilc2k]

Andrew Prentice TQ! And does it have a name for that product or just called blender?

[@Andrew.Prentice]

Pot Precious The one he is using is called smart blend, but there are other are other manufacturers who make the same thing. Will have a similar name, like blend coat.

[@texusmad6202]

I know it has to be a fine layer, actually more than one, but ...Lots of clearcoat going to waist, in my opinion, at 16:43

[@bradfordgordon6552]

Nice job. The panels look like glass.

[@Edinxg]

Thanks👍

[@SkLeRaTOO]

Non capisco... Alcuni dopo la verniciatura la carreggiano, perché lui no?

[@refiii9499]

Love that color! Not a fan of this mans paint technique tho. I prefer the full panel to panel move with the whole car not stand in one spot and paint half the panel or pillar. Too many high and low spots that need extra sanding and matching needing. Overall the car looks great tho.

[@dannyb8955]

Agree. Also I usually spray test panels to adjust my guns for proper match on the orange peel. He seems to spray very flat which leaves a beautiful finish but probably doesn't match the factory texture.

[@vidasces4337]

wow

[@robertorodriguez6772]

What P.S.I. are you spraying ?

[@kenturner3766]

Why would anybody stop spraying in the middle of the door panel or the middle of the quarter panel as you did.

[@Edinxg]

If you stop on the edges clear will built there and create thick edges.

[@MBClassicssir]

The last stap clearcode was strange😅

[@lisonbarbosa9010]

10

[@The1aquaristic]

Я думал только у меня нитки на эмаль липнут 😊

[@dc5819]

Were is the gas door won mahs the res of the card

[@rickmaston3355]

How stupid it was to blend in the roof rail ?

[@asnaebdar]

What's your set up gun for clear coat?

[@marcol67888]

asnaebdarmpp

[@zahra8440]

👍👍good jop

[@Edinxg]

Thanksss

[@zahra8440]

@@Edinxg welcome

[@zeidooon70]

What was the first paint you did??

[@Andrew.Prentice]

I believe he used a "wet bed", which is basically a clear paint which helps the basecoat to blend better to the original paint. It helps to stop shade changes, or where metallic paint particles may not lie down the same as the main part that is being painted. This means that instead of the basecoat blend going on a bit dry, it goes on a wet surface, and lies the same as the paint on the rest of the repair. This can be seen particularly on silver cars where a wet bed hasn't been used and a dark shadow appears on the blend between the old and new basecoats.

[@jakefriesenjake]

Is this water based or solvent based? They say water based paint always orange peels..

[@Edinxg]

Is is waterbase,

[@user-qs8dv8pt2x]

Exstrem 1.5????😀

[@buddee5705]

ยูๆเยื้ยมๆมากๆ

[@badrababane9647]

How you matched new and old color ?

[@megarolly94]

We should check the color code first of all, after we check if we have a sprayed card we check the match is okey or not. Every color system as like standox, ppg, sikkens, spies hecker, etc has a color box we check this as well or if we did not find the best one we can measure with a spectrometer and the computer choose the est one.

[@OO-vr2ol]

Tuyệt vời

[@christophpohl85]

Was ist das für ein grüner Lappen den du als erstes verwendest? Gute Arbeit!

[@fanyanamathibels2097]

I am amiskar

[@Naeemkhan-dr4qk]

Denting painting job

[@muhammedkhatieb4109]

Hello Edwin

[@Edinxg]

Hi Friend! On vacation!!

[@megarolly94]

I really don't understand why you spray blender?! This color is not so difficult to spray out. I think mutch easyer to spary first layer only for the primer. After one more layer and that's all.

[@megarolly94]

oh where is the gas cap? :D

[@Edinxg]

It is all about the end result,no blender also mean alot of dust from the overspray, even when you spray more clear to cover the overspray,in weeks you will see all tiny marks where the overspray was even when you wipe away the overspray before clearing. So blender works both sides easyer to blend difficult colors and pick up loose parts that can create trouble in the end results. By the way when trying to spray away the overspray runners are coming more easy, what you think? And why would you not use a blender. Look older vids of me painting i did for years not using blender even with light colors

[@megarolly94]

I don’t know. I did not use too many times, but maybe I will try.

[@clips65]

Dark colors never use blender, its just one more step too have a problem. Why leave the bumper, light, glass and rocker but remove the fuel door?

[@mauriciowilson8829]

Dutch Car Painter - Éste tipo no sabe abanicar la pistola. Es un principiante.

[@kwstasavramidis425]

WHO LIKE YOU MORE 8034 OR IT ΕΧΤΡΕΜΕ ?

[@jos1824]

no me gusta la forma de apurado tan rapido,despues rechupa donde la reparacion

[@albertopintorchapa]

Cuando mano de Barniz

[@giacomoalianto1382]

undnkqwü

[@mohamedmakhtari]

Una hora por lk meno

[@juantomayteran3466]

Cuando cuenta esa pistola amigo quiero una....de jane tu número