Painting and finishing the CBR 600 Reverse Trike Project!

It's been a long time since you guys have seen this reverse trike build but today we are painting and finishing this project. I did want to originally replace this old CBR 600 engine with something better but I gave up looking for a better engine.
ratherBwelding merchandise
my-store-5a22f...
Follow me on Instagram www.instagram....
help support me on Patreon - / ratherbwelding
#cbr600rr #reversetrike #fabrication
Music by Epidemic Sound (www.epidemicsou...)

[@carlosesilva22]

THNX I am 62 years old and really appreciate so many projects and seeing a completed project. Of course everyone wishes they could help with 2 hours of labor. worldwide...

[@danf4616]

With over 600K subs (well deserved!) I hope you can eventually get another shop (with a concrete floor!) with some room for equipment and projects. But then, you've really accomplished an amazing amount in that old wooden shed. Thanks for the videos! 👍👍

[@delandbrooks3291]

Chris, they make a clip on trigger for spray cans. It's a lot easier on your hands. You paint almost like using a paint gun. And get a short piece of 3 in PVC pipe and a cap. The drill a hole in the cap, almost but not quite centered. Put a bolt thru that hole and tighten a nut (use washers). Then you can chuck the bolt in your drill, drop a can in the pipe and spin to shake. I use a small piece of foam to help it shake (the off center hole starts the shake). Takes a lot of the work out of rattle cans.

[@EdwardMurray06]

Man, it would be badass if you had an indoor area to keep all your projects safe and rust free

[@SadPuppySoup]

That's what happens when you keep building projects but never build storage. He could sell 3 toys and have the money for a decent building (that's what I would do) even a shipping container

[@mankihonda983]

@@SadPuppySoup Or make the shop area from shipping containers, or rather they are the walls for the shop and the walls act as storage. Another KZbinr/Heavy Machine operator/fix/builder Andrew Camarata has that kind of shop/garage.

[@eriklarson9137]

I think he has enough subs that want that, that if he did some kind of fundraiser for a new shop he could raise all the money he needs. That is my .02 anyway. I would donate for sure. He deserves a decent shop with the amount and quality of work he does.

[@SadPuppySoup]

Most the channels I follow built new shops big shops in the last two years heck some even built new houses too so I kind of been expecting him to announce one soon@@eriklarson9137

[@puskunk]

He lives in a HCOL especially for any sort of commercial type area. Finding a cheap garage/warehouse area where he's at is NOT cheap.

[@RobertBeck-pp2ru]

I can identify with your build and time involved. I built a non-reverse trike in 2013 and I know full well what you must have gone through. I swear, I assembled and disassembled mine 50 times during the build. It was an open frame, street legal (motorcycle) with no real amenities, just barely legal. 2.5 L Dodge turbo mid- engine, 5 speed manual. However I got caught in a frog strangling rain a couple years ago, 110 miles from home. It changed my perspective of what you need on a vehicle if you want to be able to enjoy it on any given day. Guess what. It's apart again while I build a foam composite body for it. Yes, an actual d.o.t approved windshield, wipers, defroster, roof, side widows, full body panels, new instrumentation, like a hundred other pieces I never thought I would need originally. You did a great build on yours. I really like the single rear wheel layout because it gives you so much more room in the front for essential stuff like brake pedals and a decent dashboard. Ugh...Stay safe with your new toy.

[@terminalpsychosis8022]

Wow it sure did clean up nice. Looks so killer with the red paint job. Probably my favorite project. That cart looks like so much fun, and now looks complete.

[@JeremyMcCord]

You should be able to keep it registered as a motorcycle and street drive that thing. Sweet build!

[@trentrouse5991]

I recently got a $15 harbor freight paint gun and they work great out of the box. Genuinely worth the money. I recently primed a 64 Grand Prix and it turned out great especially for my first time with an actual paint gun it was awesome

[@eugenesbackyardrepair4593]

My son had two cbr600 and loved them both . No start issues even after sitting the winter

[@hi-techredneck7069]

Sling Blade- Ain't got no gas in it! Great job Chris!

[@larryegilman1]

As commented, self etch primer, then red paint,white paint,….add then a 2 K clear and add to the durability of the finish. ( considering all the time and effort to dis assemble and reassemble Overall very nice looking project result!

[@RandysRides]

That turned out pretty damn sweet. Looks like a 3 wheeled Ariel Atom.

[@Sponge1310]

Transparent panels would look pretty cool I think :)

[@Skiridr22]

This one of my favorite builds, please don’t neglect it again. 😊

[@johnstancato8785]

You should have sprayed etching primer on it first it would be a lot stronger and last a lot longer

[@slackamacgaming6721]

Indeed...

[@michaelcard1973]

Don't they make self etching paint?

[@Sycothrash666]

Yeah primer and clear coat

[@TheMotoHippie]

I would make it street legal. That would be an insanely fun daily driver.

[@jerrywilcox9890]

Depends on if his state allows it.what he has to do to it.

[@migueldenboer5186]

You've got no idea about the drawings and paperwork you've got to go through

[@TheMotoHippie]

@@jerrywilcox9890 here in AZ you can get just about anything legal on the street. And I know there's a few services out there that help with getting stuff like this registered.

[@TheMotoHippie]

@@migueldenboer5186 here in AZ you can get just about anything legal on the street. And I know there's a few services out there that help with getting stuff like this registered. I've done it, and depending on the mvd you can get the vin number same day.

[@KoltFin]

You think someone would insure it? And it's low enough someone might run him over

[@idriwzrd]

Looking great. You should build a cowl to cover the gauge cluster and provide some wind protection.

[@kvechannel]

Nice! The foreground color looks better if you use a white coat or white ground under

[@AkPacerPilot]

Great job!!! You might consider putting lights, blinkers, brake lights… then go get titled/registered for street use as a home built motorcycle… no reason it couldn’t be a “daily driver”.

[@jerrywilcox9890]

Not as simple as just throwing that stuff on😂😂.depends on the state he's in.

[@jerrywilcox9890]

Pa that thing wouldn't be street legal no matter what you do to it.

[@AkPacerPilot]

@@jerrywilcox9890 Ive done similar in my state. Most states have a checklist, as long as you meet the checklist requirements, it’s simple. As a motorcycle it’s easy, it’s a car where you have issues, because of a lot of states emission requirements, but no state as far as I’m aware has an emission standard for a motorcycle and yes a trike falls under motorcycle. I’ve personally built 11 custom home built motorcycles. 2 of them I sold to a guy who moved to California and he had no issues getting them titled and registered in California. Arguably the most strict when it comes to stuff like that.

[@jerrywilcox9890]

@@AkPacerPilot not all states allow it my state they won't let ya.they wouldn't even let he drive it in my state they would make him park it.

[@jerrywilcox9890]

@AkPacerPilot it not that easy lol nor simple lol.he found out the last time he was going to do it.

[@darthgbc363]

No splash - Add in a Tee & a Ball Valve. Then a plug to ensure the ball valve don't accidently leak.

[@jameskirk5187]

The white a-arms makes the front end look great. I would think black steering shaft, pedals, shifter and swing arm. Oh and a new rear wheel, the front ones look great.

[@BraxxJuventa]

Looks great Chris! Well done! 😁👍🏼

[@Sirdoolan]

4 years! This is the project that got me into this channel. It’s a shame you don’t love it, but I understand, if it’s given you so much trouble, just be done with it I guess.

[@Miniminimumm]

This is the project that got me interested in this channel. Really happy to see it back!

[@robertmontgomery8310]

Pls put on some sort of cockpit roll bar!. If you t-bone an SUV you'll go under and your head will be a crush zone.

[@JokerInk-CustomBuilds]

Red and White is the colour of my Dansih flag - the oldest flag in the world, so I approve! And black accent those two colours exellent! Infact those colours are my favourite colours!

[@Shmoozo55]

You might want to look into how difficult it would be get that thing to a state where you could get it titled, registered, licensed, insured, and fully street legal. My guess is that some additional lighting, a horn, a rearview mirror or two, and a few other bits and bobs would get it there. Check with your state department of transportation about that. It might be easier than you think.

[@robertmccully2792]

The engine start frustration was the best part. Been there.

[@jamesarnold6059]

I've become a fan of the rusty metal iron oxide primers.. less rust removal & better paint adhesion w/ a primer

[@muddycruddymess]

Man i love the old wooden workshop so relatable, love the work man keep it up bud

[@captnjaygreybeard6394]

You could the panelling on the inside, so that the tube frame will still be exposed.

[@geoffburrill9850]

Wasn't sure about the white, but once finished it looks superb with the red frame.

[@EngineeredToDesign]

Man it looks so good! Can’t believe it’s been since 2019 it doesn’t feel that long haha. It’ll be good to see it ripping!

[@Shmoozo55]

That color combination just flat dab works. Nicely done.

[@kyles5513]

Put some mirrors and a seat belt on that thing and get it registered and insured. That's what I would do. That thing looks awesome.

[@williamakey8192]

Me personally I would of painted the A arms black but other then that it looks amazing !! Great job…!!!!

[@898581]

Props to you, mate. Looks amazing 👏, your the man. To build from scratch is next level 👌.

[@stuffcompiler2121]

This one is a beauty! (Not that your other projects are not cool looking too, though). The only one tiny detail that really cannot do without some paneling [IMHO] is the back side of the clocks.

[@tedsateriale2491]

You should make your rack adjustable in length by putting the next size up tubes on one side and sliding over other tubes

[@ianellithorpe5918]

Like everybody else says, love to see finished projects.

[@ThePatillac]

I see what the problem is! (love that you shared the ending)

[@jeffreybentz7097]

Dang man, you build some of the coolest stuff, you the MAN !!! 👍👍

[@infintygamers00]

I can't wait to see when you get a huge garage where every one for your projects to exist!

[@genebond]

Wow! Looks great. Going to have to go back and re-watch some early ones.

[@mrshaneyt43]

I think it looks amazing , really like the colour choices . It’s mad it’s been 4 years , hearing stuff like that makes me feel old as it definitely didn’t feel that long since I watched you start building it . Time flys by way to quickly. Love to see this on a track . After all the work it deserves a fun day out 👍

[@pmccormicknz]

Really appreciate the videos, your skills loaded with a heavy dose of being prepared to experiment/invent are inspirational. I am in the midst of several similar projects and your attention to detail and getting things right certainly helps me to dedicate time rather than simply trying to get it done. Thanks again

[@kwcslvr1]

puppy training pads work great for catching spillage when placed under your drain-pan.

[@lelandeggleston1041]

I started watching you because of this project.

[@rong4189]

Yeah, color combo looks great

[@nash5718]

The best part of this video was the triumphant return of outtakes/fails at the end. I missed those! I vote to bring them back.

[@dalmatiangirl61]

Finishing touch would be a box for the gauge cluster, then get it street legal. Cool build!

[@Punkhonda1]

I cant wait till you have a bigger shop that way you can keep these amazing projects indoors.

[@michaelblacktree]

I subscribed right around the time you started this project. I bet it feels good to cross it off the to-do list. 😎

[@formegolf]

Hey bro, I had to say I watch your videos and they’re awesome. You are amazing at what you do. Your craft is incredible. But one thing that really amazes me is that you do everything by yourself you are a one man machine. love your work man keep it up.

[@firepinto]

It looks super sharp. Way better than those slingshot things!

[@jongun78]

paint scheme really pops! You might need to put a harness on it before they let you on a track

[@williamlanphar630]

I've been waiting for those ( almost ) 4 years to see this finished.. very cool man !

[@larrydavidson3402]

Really like the color combination.

[@bobbofly]

Drive it in 45 degree or lower weather & see how you feel about some frontal paneling & maybe even a heater. Just sayin'...🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶

[@tobiasstaermose]

It looks so cool, have you ever considered getting one of the frames hot galvanised? Some placese cold dip the whole thing, that way it would probably last a lifetime, I it gives a rather stealth gray look 👍 Love your work, keep it up 😁

[@torstenpersson5629]

yes, I want to see it on a track! Please! Nice job!

[@Todd_G_FPV]

If u paint a light or dark color behind the red it will make it pop more or darken it depending on which way u go, looks cool chris!

[@gilbertsprojects2954]

It just needs some sort of cowl around the clocks, maybe use diamond plate to match the floor pan?.. everything else looks spot on in my opinion. Well done mate 👍🏼

[@jpvill4th]

Consider covering the chassis with outdoor rated vinyl like that used in or on boats or Sunbrella water proof material. That would look really cool and it would give excellent protection in case you got caught in a sudden rain squall. I think there was a BMW concept that was covered with a fabric and you could see the tube frame in some locations. Some areas could be sewn together and other areas, like between the suspension arms could be zippered to the front portion and the rear portion. Extra material is allowed for to cover the zippers. There were some French cars in the 1930s that were covered with colored canvass. You could do the same thing. I think it would look cool. Make patterns so that when you get tired of the color you can easily replace it. You should also install a plexiglass wind screen to keep bugs and sand out of your face.

[@michaelcard1973]

Hell yeah man! That's a nice looking ride now! Keep your awesome content coming! I look forward to every one of your videos.

[@jannemec4567]

I believe that this thing needs to be street legal to show its true potential. You can take it to tail of dragon and stuff

[@anit15012]

awesome build! Best blooper reel yet!

[@SigurdurBirgirArnarson-du7su]

I would have used primer before the paint itself but still, awesome my guy

[@davidowen888]

Excellent ! As with all your projects always impressive 👏 I suggest street legal it. It can be done 👌

[@scottwright388]

You know what they say about all work and no play...you need to enjoy the fruits of your labor.

[@johnhoy3781]

Young man you're a very bad ass builder I watched you for years I've actually built my own go-kart between you and cars and cameras you guys are badass someday I like to meet you I think what you did with the red and white is that was the perfect idea wonderful job you are a heck of a fabricator I love watching you guys's videos awesome job dude!!!!!

[@bryduhbikeguy]

Seems like it was just last year...Better Late than Never ! Looks great Chris.

[@wvflying1626]

The paint is awesome.

[@EpiclyReckless]

I like the red and white 👍 White frame would've gotten filthy

[@marcmo7138]

Carl Childers would have known "it ain't got no gas in it."

[@marlinfrey4194]

Great color choice looks awsome

[@georgekurgansky5986]

This is astonishing work! blimey! what a guy

[@seanhurley6647]

Can't believe i've been watching you over five years now

[@flyingtoothpick712]

autocross with that thing would be super fun in my opinion or a track like you said. If possible title it and register it, but i know some states can be tough on that. I love it and love what you do

[@stuffcompiler2121]

We miss you, reverse trike!

[@TheScottsawesomeart]

I've bn watching your videos for a long time and this is my favorite, and I like the color choice

[@EdwardRoss-tb5hz]

So cool great job! Some minimaly stratigicly placed panels might be cool. Take it to the track in Dawsonville.

[@GuyWithCrossbuggy]

The red and white looks insanely good! Kind of reminds me or something… ps please be careful when lifting engines, these engines weigh over 60kg/130lbs😅

[@mankihonda983]

Add transparent paneling, 1 or 2mm polycarbonate, maybe tinted. You still get to keep that look 99% but get the benefits of paneling.

[@JayGee6996]

Just posted the same thing then seen this, definitely the best compromise 👌

[@fred-san]

14:20 motoculture engine, before wintering It is imperative to empty the gasoline into the carburetor, by letting it turn until it stalls - gasoline will always evaporate a little, "percolate", clog -

[@yoshirojg5848]

That is my favorite project on the channel, what a joy to see it finally finished, it looks like a very fun machine to drive, but isn't it very close to the ground?

[@larryalexander4833]

Chris mighty fine job. Everyone remember put Lord Almighty first in your life. Jesus Christ is the answer ✝️😂

[@gossi9319]

Nice work. I recommend you to buy a Pipe Grinder for these type of jobs in the Future, it works faster and better. Keep doing what your doing.

[@amaelviaene7820]

Awsome job at each time !! congratulations from France amigo

[@twodogsyyc6729]

Looks amazing man came out really good. It's gonna be sic out ripping around

[@barthanes1]

Okay, it looks really awesome but it needs one more thing. It needs a cover for the gauge cluster. Seeing the back of the gauge cluster makes it look unfinished. Otherwise it's badass.

[@YouriCarma]

Congrats. Love this project.

[@nickkelless]

I had picked black with the red… all tho very nice build. Greets

[@TroubledOnePaydirt]

Actually looks sick!! Well done sir! 💪💪🤯

[@its_me_voltron6394]

You can use the plastic from barrels. For the skin. High and dry is more fun.

[@islandlife9127]

Ain't got no gas in it lol. Looks awesome, I like the color choices.

[@NonEuclideanTacoCannon]

On the rotisserie like that for painting, it looks like a kit airplane fuselage.

[@dadasaurusrex]

I did not think I was gonna see it completed

[@grantbuxton]

I see your volume of watchers has increased quite a bit, good for you man, thanks

[@brycehenson4345]

Looks great I see a great green machine right behind it looks like it has seen light of day since you put in there grave digger ninja is what is talking about Bryce