Painting My 2013 GMC Sierra Didn't Go As Planned

[@nathansee5104]

The issue is that outside your garage is unsealed and the fine dust particles blow in when you open the garage door to ventilate it. You really need a sealed paint booth with proper filtration to avoid the junk in the clear coat. Awesome job Dany, glad that you show us the good, the bad and the ugly.

[@mikemc7704]

I see there are thumps down. Just because it is something you are not interested in don't mean you give him a thumbs down. Give him a chance to show you what he is doing.Danny is a great guy. He works hard to give us content. Its all good stuff. So no thumbs down. If you don't like it don't comment. Tell him your opinion nicely. If it is constructive maybe he will try it. So be nice. No thumbs down ok.

[@eugenem.5904]

I Like How no matter What you NEVER GIVE UP! Great Job Bud way to be a Positive influence with your platform! God Bless you! Great Videos and Content!

[@simontaylor9478]

Danny putting the work in 💪🏿💪🏿💪🏿💪🏿💪🏿

[@DannyTV7]

Yessir 💪

[@MILEVOJVODA]

@@DannyTV7 Open the door like on vid and dont turn fan.You have much less trash

[@brianbuescher8341]

The truck is looking good!!! Thank you for not editing out the oops! That stuff happens to everyone. The difference is you’re man enough to leave it in there and not edit it out . All you can do is say o-well and fix it!!! Remember it’s never a “Mistake “ it’s just another learning experience!!!! Great Job love the videos

[@martintommi7407]

Good man Danny. If you throw some water on the floor before you paint it can help eliminate a lot of dust. As is with the fan sucking and air/paint are working like a vaccum lifting all the dust from the floor.

[@EverybodySecretlyLovesSteve]

I think you did a fine job, black is the hardest color to make it right. I noticed that you have a lot of air flowing through your shop, you may want to see if you can cut down the air flow. That should help with the dust flying around. Looking forward to see what you end up with!

[@FlyEaglesFly19111]

So being at home and not having a good paint booth can be challenging. Set aside the floors but the walls, ceiling, and ANYTHING in the prep area will have collected dust to get into the paint job. For being a one man band 99% of the time you did great. Be proud.. I would of had run city..lol. Stay safe and be well!

[@ryanbuntrock6915]

Danny is such a hard worker. Love all his videos. Im sure painting is not easy in a garage.

[@carlossilva-jc8sz]

Gran trabajo!!.. Gracias por compartir .

[@shysgarage2405]

In the garage door to my shop I cut out 2 square holes and constructed some rails so I could use furnace filters while painting so the door can be shut. I just remove the panels each time, slide a new filter into the slots, wet everything down inside the shop and pull in the vehicle or parts and paint. Lot less impurities in the paint and clear. I also have a filter system that my air line goes through before it gets to the paint gun so not getting impurities that way also. Hopefully these might be some ideas that you can use...

[@joseramos7476]

Sweet on the green light man

[@dorinsirbu9273]

Try to seal the space between the walls and the ground with some cloth nets for bugs, I understand you left the space for drafting purposes but you need to find a way to filter out that space. Great job as always.

[@scottbisi9666]

A good tip is leaving the garage door shut every time you open it invites debris into the garage especially since you have a gravel driveway and grassy yard best thing to do is leave the garage shut with your exhaust fan on in the floor wet spray your clear and then go out of the garage and leave that door shut

[@melissadunagan6596]

You may be able to fit a cut to sizes air filter and put it to suction side of your fan to help with dirt getting on your painted cars and parts.

[@paulgunter1538]

Danny boy you have had your set backs on this build, but still managed to make it a real gem !

[@ingresswizard9044]

I would get some filters you can put in the space between the garage door and the floor. Also some filter on the fan you have running will cut down on the dust.

[@brianmac3194]

Love your paint work on your cars Danny tv keep up the good work man

[@ronaldduwaynebrown8071]

Looking good Danny

[@DannyTV7]

Thanks man!

[@mohamedchaudhry8]

YOU DID A GREAT JOB

[@deksam101]

The imperfections are what keep your channel real! Congrats on the inspection pass!!

[@Homemade1970]

At least you can show your little mistakes.I and most people could not even do , great 👍 work Danny boy 👍👍

[@eduardoespino1043]

Hey Danny I’ve watered my floor down right before I shot something in the garage and it has helped out a lot you should give it a try!

[@skinnerhound2660]

Great work Danny, you always push through. Peace!

[@tourday.9942]

Wow

[@tourday.9942]

เยี่ยมไปเลยครับ

[@dannycartrades8507]

Great work Danny truck looks awesome

[@DannyTV7]

Thanks 👍

[@gdtruckern7632]

I seen it coming with the clear. Yeah definitely need to in a down draft booth with no wind from outside air its full of dust and particles. BLACK is so hard to paint shows everything. Thanks !!

[@kevinespinoza2719]

Love how this is looking 👊🏻

[@chevy9599]

Oh yeah cuz it looks great with all that shit in the paint

[@flagarage9498]

Wetting the floor can help with keeping dirt down. And painting in the morning usually less dirt in the air

[@robertbrady9597]

awesome job an great footage on here all the time you make a video it is amazing job on it stay safe to you guys

[@DannyTV7]

Thank you I appreciate the support💪

[@trailerparkpirate7348]

the plastic with a fan blowing will trash the clear...use masking paper at least 18" from the painted panel. the roll up door cracked up is making a draft so dirt is coming from the floor

[@haroldboyer1174]

Good job Danny and good video...

[@3nsproductions685]

Who ever has a thumbs down for Danny I don’t know what they smoking! Danny is a good example that you can do anything if you put your mind into it regardless.

[@jdub229r]

Danny is a BMF, example of hard core perseverance!

[@briandale5645]

Great work!

[@chrissiano381]

You did a fine job no less.. Next time, sweep the floor really well, and wet the floor, to keep the dust down....

[@DannyTV7]

Thank you!

[@eddymoonen]

fine job Danny ...

[@OhYeahAboutThat]

I love this truck!

[@jimfeaster4837]

good video

[@DannyTV7]

Thanks👍

[@LeonAKALELE]

Are you guys going to sell it

[@Songoffical1903]

Good job bro i love ur video 😍🇺🇸

[@davylad4804]

Have the folk suggesting you wet the floor even watched the video? I saw you do it at least twice. Anyway another great video Danny keep it up.

[@svetlanaryabchuk9043]

👍

[@frozenstang3868]

When your backyard painting shit can go wrong, sometimes you just have to regroup. The bugs come from all around when i paint. LOL

[@mcbobly]

All in all a great effort, unfortunately that's what happens when you don't have a "sterile" painting environment but a great effort none the less.

[@DannyTV7]

Thank you I appreciate the feedback and support!

[@mcbobly]

@@DannyTV7 You’re welcome! Doing a great job with what you have available. Keep up the great effort, you’ve got this.

[@IVM8]

what gun do you use??

[@jimfeaster4837]

which brand paint ?

[@edweigman9683]

Nason, you can see it on the can

[@DannyTV7]

Nason

[@edweigman9683]

The trash in the paint is unavoidable in that type of environment. I always turn the fan off as soon as the mist in the air is gone. Wet sanding is your friend :)

[@derekshomo22]

How did go from a 2010 to a 2013 bro?

[@DannyTV7]

I had a few of the GMC trucks maybe you’re mistaken it with another one that I rebuilt

[@zme1936]

Beautiful work but the trash is killing the job try blowing the floor and area then wet the floor put a filter were ever air enters but Beautiful

[@paullevy561]

Don't sand where you paint, and wet down the floor. Otherwise great job.

[@ambroselake9156]

The quality of work you put out is outstanding, i would trust you with my car Danny, Respect to you and the content you put out.

[@coverado]

Hey Sir! We sincerely look for a collaboration with you! Are you interested in trying our fog lights for your Sierra?😊

[@ralphlebrun3297]

First ! 🔥🔥🔥

[@realmccoy7503]

Too much pressure on the pistol creating massive blowbacks to let dust travel everywere, or your just to close with the pistol, anyway nice peace of work shure it will work out just fine. Congrats with the State inspection green light....

[@scottm3130]

You need to find a paint booth, all kinds of trash in that paint job. Costing you time and money.

[@roy1966hill]

lets see if he really reads the comments hey danny what kind of deal can u give to a guy that is handy cap on a truck and dont have much money