The Most Preventable MISTAKE a DIY Painter Can Make!

[@backho12]

This guy could get incredible results painting even with a mop or a rake!

[@JESSEPAVON]

For the price none better than this one. I now feel like a pro.

[@Jim-fe2xz]

I'm just a hobbyist and it took me quite a while to figure out to make final adjustments as you spray. Since there was usually a fair amount of time between time spraying once I got the results I wanted I always wrote down all the settings and weather conditions on the back of the spray-out card. That got me pretty darned close when I got back to the project.

[@matthewtignor1018]

I've watched a lot of your videos and it really gave me the confidence to try painting. I love the slogan "Don't overthink it, it's just paint." You really just have to try it to learn it!

[@anonimous2451]

Yup and make all the mistakes rookies make. Trust me, it isn't all that easy. But try and then try again.

[@chriswallace9113]

I sprayed some panels with this gun over the weekend. It seems to be more forgiving than HVLP guns I have used, given less fluid is coming out. No sags or runs anywhere and that’s saying something for me. No doubt, though, this channel helped a great deal. Thanks to Brian and Paint Society that little BMW that’s been collecting dust in my garage will be presentable again.

[@oznetyoutube125]

Another amazing spray session.... Obviously, your technique is rock solid, you're a good painter... But Brian, You are a DAMN GOOD Instructor. Layering into that near-flawless color match was awesome. TY for letting us learn from you.

[@PaintSociety]

Thank you!

[@Know-Expert]

Thanks Brian, I learn a lot just by watching your videos….

[@YootubeUK]

Quite right Brian, compressor tank sizes can be a problem if you're tanks too small. Another important one is airline diameter. Make sure it's up to flowing enough CFM, too small an I.D. and it's another "bottle-neck" you don't need if you're struggling for volume flow.

[@PopsiccDesigns]

What are the signs your compressor is not putting out enough CFM for your gun?

[@YootubeUK]

@@PopsiccDesigns Someone more qualified than me can probably give you a better answer but, you should hear the change in sound as you pull the trigger, you'll notice it if you've a pressure gauge on the bottom of your gun. The droplet size will get bigger and more orange-peel, less paint in the air and it will be slowing you down. Brian made a video on getting the correct pressure for your gun, that will show you ideal droplet size.

[@Jopakilo]

12:18 so true. My k1x colour looks decent when under sun light. But it turns out completely different in the weather as you said.

[@frankgerardo8977]

Excellent tips! As usual, very helpful. Brian, I noticed your plastic sprayers in the video. I just got a Super Maxi 1.0 Acetone sprayer by Birchmeier... it is amazing (I have the Iwata Acetone sprayer, which doesn't even come close). It deserves a video and deserves to be in your arsenal. Thanks!

[@BOOSTJUNKY]

Just ordered this using your link! I also bought the iwata from a few years back when it was about 120ish!

[@jimprovax6846]

Hi Brian. Great content as usual. Just got this spray gun for my dad. He loves doing small projects. Great results so far. Enjoy your weekend brother. Have a Happy Father’s Day with your beautiful family.

[@PowerOfOne-u4h]

Thanks Brian, I learn a lot just by watching your videos…

[@Jopakilo]

I totally agree. When you look at the colour under the sun, it is matched. But it goes different in that cloudy day. Any lights on the market will help to show the colour defect/ matching? 12:28

[@KeepIt7000]

I order it yesterday and got it today. You was right about it. Ima use it from time to time for other stuff but got it mostly for SRA 😅

[@socalstangman4655]

Man another great video. Amazon was a running a special deal on this gun the other day for 79.00 for this complete kit. I heard so many good things about it I went for it. I haven't tried it yet but I cant wait to.

[@chriswallace9113]

Ha, I did too.

[@PaintSociety]

For $79 i would buy 2!

[@derekwall3048]

Just finished the bed side on a 2016 Denali and used a $60 gun. It turned out beautifully and got a perfect blend. Wish I could share a picture of it!

[@WoodsKushington]

I watched you for a while before my first project. Ended up painting this mk3 jetta trunk tornado red with a east wood 2 gun kit and a 5 gallom tank lol. Lets just say it took me a month to figure out the setup to spray a smooth base and clear with such a low gallon compressor lol. Took it to a looking paint shop and they said it looked better then some guys painting for 10 years that he knows.

[@trevcessna1723]

Good info about compressor size VS gun requirement! Nice paint job as always! Thanks!

[@442olds7]

I bought a really cheap gun ,less then 50 bucks from a place where they use a slow boat to ship it hehe, have not used it yet. Looks like it will become my primer gun, I am thinking this LVLP Spray gun might be my base/clear gun since my compressor isn't so great. I only do my own stuff anyways , I am not too fussy but still want it to look decent . Good video.

[@chriswallace9113]

I just got this gun a couple days ago and that’s my plan as well, going for a cheapo to spray my primer and this for topcoats.

[@StarMotorsDirect]

Can you recommend a Primer Gun?

[@pd9888]

another great video Brian. keep up the great work ! Blessings ! Have a great day

[@djbofjandb]

I haven't got to use mine yet as I was struggeling getting my drying system together as far as fittings and such but between the A610 I got and the DV1 the DV1 seems to be a great well made gun. I am working on my first paint project in a while repainting my 5X8 enclosed trailer. I think it will do well. Then I've got 2 posting jobs lined up painting a 11 Buick metallic black, then reclearing a Ram 1500. then onto painting a F350 crew cab dually 😮, Z 71, and eventually my 81 C10 All while being a OTR truck driver 70 plus hours a week, and DJing on weekends here and there. It might take a while to knock em out but I'm on em! Love the videos man!

[@Middlestepofficial]

Truly amazing! Thank you for such great and extremely valuable information. Keep up the great work!

[@125southernnh2]

This ain't your first rodeo. Your technique is flawless.

[@DavidWarner-hu4le]

Love your instruction!!

[@mrobvious9535]

Running a kobalt 26gallon no issues on the small to medium jobs. Big difference was going to high flow fittings I can really keep consistent pressure all the way down to 40psi at the tank. I have a tank pressure sensor in the second output port that buzzes below 50psi so I know if I'm about to get in trouble

[@CapeCodTrainTodd]

The front bumper you matched looks better than the factory painted rear.

[@WJHandyDad]

looks good as always

[@robstrains8711]

For the price, that gun is awesome. Great paint job.

[@yellek]

Very good. Keep up the great videos.

[@richarddiaz8248]

Very nicely done

[@thomaspotthoff3139]

Still the best here brother! Many Thanks

[@kevinbranco1585]

Awesome video, great advice! Thanks

[@wingman8447]

Good tip. I’ll check it out. Thanks

[@klogjo]

Your videos on setting up a spray gun made my paint job. Can't thank you enough. No orange peel.

[@richardbartlett4075]

Great video! I enjoy your videos and you speak very well. I'm 69 and I build high performance motorcycles and repair with my three pups. New to proper painting but long time rattle caner. Which do you mainly use, HVLP or LVLP? I understand the principle between both and I would think the LVLP would be of better for gas tanks, fenders and so forth. But I can't tell you how many times I have been wrong in this many years. Thank you for your time and willingness to show all of us your awesome work.

[@hamiltonmckenzie8132]

Hey byran .honestly I have watch your paintings and honestly I have learn so much bro and today on thus bumper you teach me something new I really appreciate your vedios bro ,keep up the good.work I use sata rp and also help you really help bro thanks a lot.

[@juanmena4676]

For the home DIYer. What economic gun what you recommend for shooting Primers, base/clear? Is there a 1 gun for all?

[@chriswallace9113]

Man, I’m so glad you featured this gun. I just got it a couple days ago for my BMW project. I’ll take that as a sign.

[@kurtgood2914]

Brian this paint gun seems good and the bumper looks great 👍

[@kevinmcdonald6446]

Thank you for sharing your knowledge and experience. Lots of help.

[@johnsmith-qz4bv]

looks great ..will a 1.5 tip spray .002 micro flake ..?..

[@fundamentallybroken4194]

Im shooting ford Eruption Green Metallic (code FA) on my old CLS 55 AMG. Im also using the drizzle d1. Only difference, ive found that going "wide open" on the fluid feed doesn't work for me. But im fairly new at this, so i like slower speeds!

[@cvseth22]

Hi Brian can you make a video explaining the difference between all the different guns, like hvlp lvlp etc

[@davidvalbuena59]

Oye amigo tengo una pistola igual que presión usas para la pintura y el barniz gracias 😊🫂🙏🏻

[@sttm1283]

damn, thats a really good paint match. and the gun itself seemed to perform awesome. i know the conditions in a booth c ompared to a garage will differ significantly but im sure this will perform awesome also in a diy garage or homebuilt booth....

[@alexandres95]

Gracias Bryan 😌

[@marty3553]

Great video

[@kimonjm24]

Great video a lot of knowledgeable information 👍

[@lrmodranoel]

Perfect match.

[@customevice6650]

Do you need to clean the gun when switching from base coat to clear?

[@calvinpotgieter]

Hey Brian great work mate always watching your videos great explanation with everything!!! Quick question for you what is a good paint to use for the underbody after epoxy primer

[@stevec5657]

Thanks (again) Brian 👍

[@colboysigmax]

Seriously great video! Thanks!!

[@thevinylwrapper]

Hey Brian, love the channel brother! Thanks for sharing all this great content! 30 gallon is kind of a large compressor for us here in South America. Mine has a 15 gallon tank only, would I get going with a compressor this size? How big are the compressors on a proper workshop?

[@DRHotRodTheRealtor]

Do you like this gun more than the Astro Euro Pro? Assuming I have enough air flow for either the HVLP or this LVHP which has less overspray?

[@DirtyBond]

If you had to pick one, would you choose this or the aero pro a610?

[@michealrucker2959]

So is the 1.7 tip good for spraying sealer or do we need a 2.0 tip?

[@lloydkratka3733]

I have a sata digital 2000 that’s 30 years old and it sprays as good as my DV1

[@lazygamer9725]

Brian.. loving the cntent brother! Hope the growing family is al doing well!!! When you and Mario gonna get a collab going... hes quickly coming up you mustve taught hom alot....

[@PaintSociety]

We really learn alot together. Its a blessing to have him as a partner.

[@lazygamer9725]

@@PaintSociety what's Pedro been up to? I followed you for years then Mario started... and I'm wondering where is Pedro? The family keeps growing brother... you gonna have to keep the bun outta the oven!!! Lol congrats on everything brother! You deserve it all!

[@pavelhaponau3087]

Hi guys! Do you need wash your gun before clear coat? I did base 2 coats, empty the tank of spray gun (didn't wash it) and fill in clear coat. Is it a mistake?

[@christosmassouras9208]

keep up the amaing work that you do, can i ask a question, i am painting in home garage and here in Greece this time of year can be quite hot, we have an average of 90 to 94degrees, how to risky is for my clear coat because i am having trouble with it blistering, ia am shooting 3 coats of clear with the first being light coat and waiting for about 30minutes to shoot the second and another 30minutes for the 3rd and the last two times my paint job was f....d up and i had to do it all over again, sorry for the long message

[@alecf3691]

Bought this gun from your recommendation and all the excellent videos. But still not sure what to use for paint. Any help would be very appreciated… Horse trailer restoration for my wife’s business. Thinking of having it sandblasted. Then priming with epoxy primer? And 1k or 2k paint? Want it to look nice but also will be painting in a barn not a booth. So expectations are realistic for me.

[@Hargy90]

I admire showing the bumper fitted on the car under florescent lights at limited angles.. in contrast to the advice previously in the video😂

[@chrisczarnik3439]

Great pain job demonstration.👍👍👍👍❤

[@RaphaelMeridda]

Hello, thank you for your videos, always very helpful!! I notice that your spray size is much bigger than mine. I use a 1.3, pressure around 2.5/3 bars. My spray is much narrower, I cannot seem to achieve such wide spread of the paint. Could you point me in the right direction?

[@MatthewWoolf-l6d]

Hey Brian, from the UK here. Explain these to me? How to use them and the purposes they have? Are they different things? Or all the same thing? A basecoat binder, an intercoat clear coat, and stabiliser thinners for metallics. Dunno what an intercoat is at all, but from what I can gather, a basecoat binder is the same as stabiliser thinners???

[@Schmuck1505]

Buddy please make us a video on how to blend clear coat thank you !

[@aticafloorable]

Sir, I have a 6 gallon compressor, 100 psi, 2 cfm flow. Does it work with this gun? Thanks

[@davidwhite9676]

Hi Brian from the uk ! About to paint a white fiat ducato van in an electric orange pearl , what colour primer or sealer should I use beforehand please ??

[@Mike-01234]

I was wondering about those turbine compressor and spray guns they seem to be a match pair I'm assuming because of the CFM. Can those turbine and spray guns replace a large compressor, plus all the devices needed to condition the air for spraying without contamination.

[@lesliwells5433]

HI MY FRIEND,DOES this D1 drizzle has less over spray, than the A610,or yt160,or they all the same?❤

[@Jopakilo]

I would like to ask what is the amount of paint to be used on this gun comparing to expensive gun? Is it less or more? Then all Diyer will have good preparation. Thanks 🙏

[@ray6808]

Great video. What spray gun do you recommend? ❓ 🤔 if im using a Rigid compressor 4.5 gallon with a 5.1 SCFM at 90PSI.

[@Jopakilo]

Is it ideal to leave the paint job overnight then spray the 3rd base or even a clear?

[@elchapo2485]

Hey Brian you think you can make a video for compressors, most of us have 120v outlets so how would you approach a 220v compressor

[@SalvadorHernandez-i5d]

Hello Brian, DIY user, trying to repair my sun damaged 2004 Titan as well as a few rust spots from the Florida sun. I watched many of your videos, very informational, thank you. I am encountering difficulties with getting the G10 Galaxy black metallic paint, and clearcoat, could you recommend a vendor that is trust worthy?

[@PaintSociety]

Yes. Eastwood.com. You can buy their oem select paint. Mixed to your Paint code and shipped to your door.

[@XtremeproDetailers]

Do you do in person classes?

[@jasonevans6720]

Brian, iam having a moral dilemma on paint matching bumpers, I can pannle match very good but if the factory ones don't match what should we be trying to achieve? If we do a good job they know it's been painted. Your thoughts please

[@thomasngo3746]

Do you have the link for this spray gun? Thanks

[@aroldofanganiello2251]

Hi Brian! When you said everything that paints on the bumper, reproducing it on the card includes the primer, because the card is white and the primer is gray, can it make a difference if you apply the paint to the white card?

[@jedi-mic]

I was wondering can you use metallics in lacquer

[@philtucker1224]

Brian I can’t afford a compressor but I was thinking of fitting a large tractor style inner tube up in my garage loft space and just use my tyre pressure pump to inflate it sufficiently to connect to spray small (motorcycle fairing) size panels etc. Is there a gun that would spray at that pressure?

[@johnnybrigham8754]

Beautiful job brain what gun is that? What is a Binks M1G? Thank you great job my friend.

[@smoggy1964]

Did you not look at the box in the video 🤦‍♂️and look at the link in the description

[@Sandbridgeman1]

I use 4 guns. A gun for primer Solid base coat Metallic basecoat and one for clear

[@KelvinFatima]

How would you rank this gun compared to the harbor freight black widow spray gun?

[@KelvinFatima]

How would you compare this gun to the harbor freight black widow spray gun

[@KelvinFatima]

How would you compare this gun to the harbor freight black widow spray gun?

[@metalwright]

Noob question: I have a 60 gallon compressor, but it's a single stage and it seems to have to run quite a bit to top up. Is there a point at which having a better compressor pump, like a 2 stage, or a more powerful motor, is more important than tank capacity?

[@Jopakilo]

Any reasons not blending the quarter panel to have better matching except the price for the job?

[@HPAcustomriflesandcerakote]

I am surprised in you Brian. I always use a disposable in line filter under my regulator. No matter how good your moisture trap and seperator is you can still get moisture in your air line from the air being made being a different temperature than what your shop is. You also constantly have small pieces of rubber from inside your house even when new and as it gets used

[@FrankBaidoo-ef8sb]

Thanks boss ,

[@tuono1500]

What do you do with the gun for the 5 minutes you are waiting for the paint to dry? Doesn’t the nozzle in the gun dry as well

[@firegardn77]

HELP! I repaired some rust and at the point where I sprayed my cars base coat color. I had a few drips that needed to be sanded. Do I need to re coat the sanded spots before spraying the clear? Or can I just clear over the whole spot (sanded and unsanded)?

[@troymennitto9571]

Hi, I'm wondering if you could give me some advice. I am trying to paint my very first car (truck). I'm using Duplicolor premixed paint and a Kobalt SGY-AIR176NB paint gun my son bought me. At first I got a lot of rough texture and orange peel before I watched your video about air pressure. Playing today I think I figured out I need to thin the paint 1:1 with acetone. It's coming out better but I'm still getting a little texture. I'm doing gloss black and practicing on old fenders that came off the truck.

[@lazygamer9725]

Brian isnt the markings on the shaft itself? Inokraft drizzle d1 has them on the sides

[@PaintSociety]

I might have missed that

[@lazygamer9725]

@@PaintSociety idk I think 1 I bought months ago had the marking on the shaft side... I can't remember but I believe it may...

[@joshdane5657]

​@@lazygamer9725yea my drizzle has the marks on the side but my aeropro a610 don't. They're all upgraded r500's. Some people hate them some people love em. Lol I like mine for the diy stuff I do at home. I probably got more in the a610 because it didn't come with a pps adapter and I got a different regulator than the one it came with. I like how the drizzle has a little case instead of an ole cardboard box.

[@FE428Power]

Do the smaller compressors have issues with severe condensation? A friend bought a 30 gallon tank and he has installed a water seperator at the tank and a seperator at the gun, but is having issues with spraying water. Any suggestions?

[@toycoma98]

build an aftercooler. I built one for my husky quiet 20 gal using a 5" power steering cooler and a muffin fan.

[@ronaldwexler8570]

I watch many painting videos and my question is How fast do you move the gu?

[@MrgreenurPastures]

How is it lvlp? The cfm consumption matches a lot of hvlps. Am I wrong? Let me know if I'm missing something because I'm new to this painting thing and my hvlp I bought is 6cfm consumption.

[@renecenteno5921]

Very nice.