Pallet Rack For The Shop + TN/KY Scenery!

I finally get a rack put up in the shop and get all the parts off the floor!! Plus I take the scenic route home thru beautiful TN!
Check out the main channel!
youtube.com/@T...
Check out my merch!!
thisnthatgarag...
Facebook: / thisnthatgarage
Send me stuff!!
This N That Garage
PO Box 489
Pleasant View, TN 37146

[@chuckelliott3894]

Thanks for your service handy-dandy handy-dandy

[@nickwojciechowski6507]

Baby Steps... tell you handy dandy handy dandy....Semper Fi.

[@joeberry4179]

SHOP IS AWESOME!

[@FatherHogg86]

To the handy dandy handy assistant thank you for your service and everyone else that also has or still is thank you 🙏🏻

[@93z32]

that shift control module cracked me up😂😂😂 you never cease to amaze me with your ingenuity

[@JS-kd7jf]

Tell your handy dandy handy dandy handy dandy dandy handy assistant,, THANKS FOR HIS SERVICE!! Y'ALL BE CAREFUL DOWN THAT WAY IN THIS WEATHER!! STAY WARM!!

[@Dagrond]

Thank you for your service handy dandy handy dandy assistant!

[@rudyrivera7426]

Thanks for the ride! Beautiful country! Garage looking good! 👍👌

[@leekidwell8795]

Beautiful country side, love those small town squares as well. Those racks are awesome, and will be both handy and dandy. 👍 Looking forward to the 40 video tomorrow night.

[@alexbetteridge8200]

Thank you for the extra bit of driving….very lovely scenery. Really enjoyed it. Look after your knee👍🇬🇧

[@jasonstarnes3838]

Wirh those racks, everyone gonna think you're a florida gators fan!!😅😅😅 Great addition to the shop!!

[@ThisNThatGarageExtry]

I don't do sports so 🤷‍♂️😂

[@DarrenTutt]

Can’t wait for your next bloopers. MLS. Morris laughing syndrome!!😂😂👍

[@jamesmcdonald5868]

For future reference, if you decide to get more racking, you can use 2 by force as cross supports. And then when you go to put the plywood on, you can screw them into the two by four, so it stays stationary.

[@ThisNThatGarageExtry]

Cost is the same and wire decking just drops right in, no 2x4 cutting. 👍

[@CPthetooladdict]

Organization makes the soul happy!! Thanks for the video Chad!!

[@danielstrachan8988]

Those shelves probably already paid for themselves 😁😁👍👍

[@DanDan-yy8sf]

👨‍🔧🧰🔧🔨⚙🏁 "Augh-Ya" Rack'em & Stack'em. "Extry, Extry, read all about it" , TNT Garage has it's Dance floor back. 😂🤣 Thanks for the video 👍🏼

[@jeffreyclark2839]

I was stationed at Ft Campbell KY - 1999-2001, went camping and fishing in LBTL many times. Beautiful area. Great job on your channels.

[@astravanmk2]

Thanks Chad! What a beautiful place you live in. Thanks for sharing. The pallet racking looks awesome.

[@BigkevdawgNSLBC]

Thx Chad for the scenery even if it is Kentucky cause some of us on the WEST COAST CALI we don’t get to see things like that so I thought is was really cool thx bro

[@randyriggs5463]

Those pallet racks are going to come in handy. Garage is coming along! Really enjoyed the scenery. Tennessee is a great place to live.

[@dannybenfield1164]

Beautiful country side I like to take the back road on some trips some time see old cars or trucks in field

[@vic745]

No matter how much bigger your shop is there still not enough room 😂😂. Awesome video brother. I'm a retired Marine as well. Ooh-Rah!

[@terrywebb8636]

Hi Mr. Chad still fighting Covid, the shop is looking good, looking forward to tonight video. I did like the scenery, you should do that more often.

[@daleh645]

Looking good and beautiful scenery! 👍 I like the rack colors…University of Illinois! 🏀 Take care of that knee and God bless 🙏🏼🇺🇸🇮🇱

[@robertbennett9243]

You are going to like those pallet racks. Good idea to have space between them and wall. Love the osha approved step stool.

[@walterrobbins4470]

Glad you are helping a veteran and getting some help for yourself

[@byrdsdoityourselfgarage7330]

Don’t never turn down momma’s cookin’!!!!

[@bgarrett28]

Thanks for getting my bay cleaned out. The z has coilovers that should be here soon 😁

[@ThisNThatGarageExtry]

Rent

[@stevem3413]

Thanks for the ride through the beautiful country 😊. Do you ever do meet & greets or go to an event that you wouldn't mind someone stopping by to say howdy?

[@ThisNThatGarageExtry]

Gonna try to get out some this year maybe.

[@donscarborough1951]

Great Video. Awesome scenery. Thanks 🙏🙏

[@kyjunkman27]

Thanks for all your vids chad. Enjoy what you do, and your determinaton on your projects. Thank your nephew for his service. I enjoyed your shift control module, done something similar myself on an old 4l slippy in my chevy.

[@jerrymurphy6673]

Keep up looking good

[@davidnelson95]

You said you went to eat with your mother you are blessed she can still cook and do for herself. Enjoyed the video

[@mikemadison2747]

Thanks for the scenic tour, made me want to go fishin there at the end. And that rack looks super sturdy, very nice!

[@dixiemay1996]

That's what you call actually seeing air in the tire.. no gauge needed.👍

[@shorerebel]

Enjoyed riding out with you a bit! The shelving is awesome. A great addition to your shop.

[@TheAswin1971]

I like this kind of roadtrips. please more of those.

[@tannerlawson1721]

Looking good there buddy keep up the good work I've been spending the would about yoyr channel to my uncle and daddo yoy r very entertaining ❤thank u for sharing you time with all.of us we al appreciate it😊

[@dannysettles5646]

First time I ever been to Kentucky 😅

[@stuartfletcher5407]

What a nice trip , Been through Tennessee but never into Kentuckey . You got your racks up and now have more room for more stuff , naw a spare bay . Thank you for such a nice video , very refreshing to see some beautiful countryside , take care , stay warm , God Bless , Stuart in Canada..

[@DaveSquibbSr]

Both Kentucky and Tennessee remind me a lot of where I grew up in West Virginia, either way it's all beautiful country.

[@lonniethomas9351]

That looked like Land Between The Lakes in KY. Beautiful Lake.

[@geebopbaluba1591]

It’s going to be 8 degrees in the morning here in north Texas and we’re not use to that. Glad you’re doing better and keep the videos coming

[@ThisNThatGarageExtry]

Same here this morn!

[@Vikes-hw1re]

I could see a trailer conversion project in the future. A guy used to be able to convert those MH axels into standard trailer hubs back in the day.

[@Maximus65]

I’ve driven all over Tennessee at one time or another and there is definitely some beautiful scenery to look at! I live next door to you here in NC 😊

[@vishaledwards738]

Love the video my friend

[@patriotmob3227]

I hear more about your knee than I do the 40 haha Keep up the good work friend

[@LarryCruson-wf8pu]

Great content Chad like the drive through Kentucky I have been to Land between the lakes before it's nice 👍 Larry and Sandy

[@robertchryssikos1006]

Thanks for the ride the countryside was beautiful. Take care.

[@verncommet1798]

I agree my shop is 60x40 with a 16x60 up stairs plum full, not to mention family want to store stuff as well 😢

[@BenjaminKuso-op6ob]

Garage looking much better with the racks installed cheers chad

[@braddokken9191]

Good choice getting pallet racks. Wish I went that route in my shop! That is some beautiful country down there, thanks for sharing!

[@bobbykeyz1263]

I didn't know you had a Facebook page. I will for surely join.

[@lewiemcneely9143]

MERCY at the blowers ani I used to haul out of Cleveland and Knoxville into NC and Georgia. Pretty country and we always have shelves/racks slam full before we ever thet 'em. God Bless!

[@kennethsonier1766]

The pallet racks look like they're going to work out well. Thanks for taking us along through the beautiful country side. Keep up the good work 👍✌️🇺🇲

[@lindathrift4805]

That’s right; gotta take time for Mom’s cookin’.

[@olymono2625]

We use 2" x 12" boards on our tracks instead of wire racks. It works, and they hold a lot of weight. Rough cut wood might be cheaper.

[@WingmanJohnny]

Working it bit by bit. Looking great thanks for the tour

[@k-dawg3893]

Good progress on the shop! Nice work This N That!

[@jasonmushersee]

boy thats what i need. i built a 4x8 2x4 & plywood work bench on casters for staging projects its a game changer cuts about 1000 trips to the work bench

[@kirk467]

I like those racks and especially with the plywood on them! Good video Chad, keep yourself warm up yonder brother! Bad weather on the way my friend!

[@ThisNThatGarageExtry]

Already here!

[@dalehartley-vd9qo]

The nice shop is getting better and better all the time good video thanks

[@paulweigle6872]

That pallet racking is some heavy duty stuff. Good choice.

[@scottmmagby7057]

Hey, Hey , Mr Chad. Loved the Extry video. That new shop rack looks good and sturdy, Love it. Also really enjoyed the ride along through the old back country. I am just next door to you over here in Arkansas, we have some nice back country roads here as well. Thank you Mr Chad. look forward to the next video!

[@lancemeads9551]

Sure enjoyed the scenery.

[@82randyacman]

Hey Chad you got some snow. ❄️ we do.

[@1776_Garage]

Where I'm from we got 20 inches in two days.

[@ThisNThatGarageExtry]

We got a little bit.

[@TheCrackerBox]

Thanks for another , Brother !

[@Louisianacountryboy4426]

Great job 👍👍👍👍 keep on believing in yourself and making absolutely amazing car and things I am learning a lot more than I know thanks 👍

[@rogerdeneault6560]

love the scenery Chad!

[@Thomas-fo9zu]

Looks great, up is so much better! And you can see what you have at a glance.

[@benschlack5814]

Good times buddy for sure 👌

[@timsmith5860]

Awesome.. You were in my neck of the woods.

[@sandgroper4044]

Love your channels mate .sure is pretty country out your way .keep doing what you doing

[@garyinman5400]

Love the cruise through the country side, and yes that was a beautiful rest stop. I agree never have enough space if you keep things to use later, but if you don't you spend too much money. Keep the shows coming love them all.

[@daviddamico4288]

The racks look great,take care of that knee ..

[@brianramsey4097]

Your garage is looking great looking forward to see how you get it all set up thank you for sharing

[@corydriver7634]

Looking good.

[@geraldharkness8830]

love all what you are doing chad!

[@SPAZTICCYTOPLASM]

Doesn't matter how big or small your shop is, stuff is like a gas it expands to fill any space.

[@AndrewHCann]

Excellent video Chad :) also only seen one tire did like trailer was farm tractor one did it also had tube inside still had half air was 6.00 16 inches front steering wheel one and surprises me! Also rack storage very nice one for shop too store need to use sometimes and plus more!

[@briantaylor6257]

thank you for serving merica that tire only flat on the bottom

[@jangles1839]

Hey hey y'all! Hope all's well with you guys! 💙🙏🏼

[@jameskurdy4873]

Keep it up 😂. Stay healthy!

[@nathanielwaldon1534]

We just put up a bunch of those racks at work they are handy. Thanks for the extry content!😂

[@rickydonahue1586]

It'll be nice to have stuff in one spot once you get it all moved I'm sure. I have family up in Ethridge TN. It's beautiful country. I'm glad to see your getting the shop the way you like it.👍👍😁

[@WVJeeper1968]

Hiya Chad! Looking good bud! You forgot to say "go do somethin" Blurbbbb!

[@phillipvanblaricom8151]

2+6 works great for those racks

[@johnruppe1699]

Looking good! Thanks for the extree update!

[@morewithles]

Ever wonder where all the stuff occupying your new space comes from? If you build it stuff will come! 😂👊🙏

[@ThisNThatGarageExtry]

🤷‍♂️

[@ConRodsAndRustedBods]

The furniture dollies from Harbor Freight work great for wheeling around engine blocks.

[@alanmoon9275]

The Curtis Co. Piedmont sc has used rack rails

[@benmmaddog]

a voice activated transmission

[@ThisNThatGarageExtry]

😂

[@vborg001]

Shop is looking good!!

[@fredschoettle288]

If you put those shelves on wheels you would increase usefulness and free up space.

[@pecktox]

Kuddos for getting back after a meal. Once I eat very much I'm done for..pex

[@larrywood1201]

simplfy Brother Thank You

[@cliftonrobinson722]

garage lookin good love these videos

[@wolfhound4010]

Love your channel. So old school. Use what ya have. I do the same.

[@cliftonrobinson722]

u can use 2x6s too in ur racks seen them that way alot

[@leecornelius1424]

Put same kind rack in my shop cut 2x4s they fit great in notch on orange rails then covered partical board

[@ThisNThatGarageExtry]

Lumber is about the same price as the wire decking and I didn't have to cut a bunch of 2x4.