Palm Oil Processing - The FINIC G3 and G4 Palm Fruits Digesters in action.

  Рет қаралды 20,236

FINIC Industries

FINIC Industries

Күн бұрын

One of the difficult tasks in palm oil processing is the maceration of the boiled fruits. Some traditional practices use the feet to crush the fruits in pits or canoes and some use the motar and pestle. All of these practices are heavily drudgery ridden and also reduces the palm oil yield by a significant number. 20% of the weight of the loose fruits will be palm oil when traditional technologies are employed as against 33% that would have yielded when mechanized digesters of the FINIC type are used. 13% is a difference too big to be ignored. For every 100kg of palm fruits processed by such traditional ways, 13kg of oil will be lost to the palm fibre. That translates further to hundreds of thousands, if not millions of tons of palm oil, are lost by this way accross the world.
The search for innovative ways to curtail such waste, and let the farmer and the Processor be turned into a dignified labouring person, must be in our priority list. This is why FINIC has designed 5 series of palm fruits digesters serially called Generation 1, 2,3,4, and 5. Generation 3 and 4 are showcased in this video clip.
G3 and G4 are evenly matched in regard the capacity but yet are different in terms of sturdiness. G3 is less sturdier and its drive train is made of motor cycle chain and sprockets whereas G4 is made of a heavy duty gearbox. On that account, G4 has a longer service life than G3. We have recorded a 14 year life span of the G4 without problems unless essential spares replacement.
The cost of G4 is $3,600 and that of G3 is $1,800. Please note that the cost stated here is that from Sierra Leone. FINIC Ghana and FINIC Nigeria might be different.
FINIC IS GOOD FOR AFRICA
Reach out at :
In Sierra Leone, contact us at +232-76-601956

Пікірлер: 113
@obiorah1
@obiorah1 Жыл бұрын
The State and Federal Governments should invest into Palm Fruit Digesters for farmers who are in the palm oil industry in the South East and south west of Nigeria,
@Odidimusestories
@Odidimusestories Жыл бұрын
Is the drum big to contain ten buckets of paint or even more?
@Odidimusestories
@Odidimusestories Жыл бұрын
Does it separate the kennels from the chefs
@victorugochukwu8265
@victorugochukwu8265 Жыл бұрын
This is so beautiful and bless your hustle. Can you make a video of the clarifier and how it seperates the oil from other residues.
@finicindustries2787
@finicindustries2787 Жыл бұрын
Thank you and Amen. Will upload another clarifier. There are some in this chanel
@ChukwuMorris-lf8bo
@ChukwuMorris-lf8bo 8 ай бұрын
How much for you products
@otimpeter1090
@otimpeter1090 Ай бұрын
Wonderful indeed, but the problems we face in Africa is that our leadership are always bought by US and European to not promote this kind of innovation and creativity we have in Africa. Loud and clear from Uganda the pearl of Africa.
@aybamcontinentalresources
@aybamcontinentalresources Жыл бұрын
I love what i am seeing, Pls how much is G3 & G4 price in Nigeria
@Monyplux
@Monyplux 2 жыл бұрын
You are doing a nice job
@ArthurJames-cu9os
@ArthurJames-cu9os 3 ай бұрын
Good morning
@GlobalFavourFreedom.
@GlobalFavourFreedom. Жыл бұрын
Pls how much is the current price of this one and cost of sending to akwa ibom state Niger
@iweobodohappy3951
@iweobodohappy3951 Жыл бұрын
I suggest that you add cover to avoid the waste in the products
@otangako3697
@otangako3697 Жыл бұрын
Nice one,please how much does this machine cost and can you deliver in Cameroon, prince for both generation 3&4
@filipebras9898
@filipebras9898 8 күн бұрын
hello iam Filipe iam from Angola i like these machines price please
@EmaduGodwin-so6dn
@EmaduGodwin-so6dn Жыл бұрын
How do I get this various plant and equipment.
@donoleri7119
@donoleri7119 2 жыл бұрын
Good Job bro and well design but more innovation is required on it.
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Thank you.
@JaneMandy-q2m
@JaneMandy-q2m 7 ай бұрын
Please how can I get this machines, cassava and palm fruit to be precise
@augustineekene9096
@augustineekene9096 9 ай бұрын
Very nice,how can I reach you and purchase this machine IAM in Nigeria Delta State
@bensonyeboah8738
@bensonyeboah8738 Жыл бұрын
Nice one how much does them cost
@franknouahn692
@franknouahn692 4 ай бұрын
How can i get one of the 4th generation and how much it cost? I am in liberia
@kairosenterprise2067
@kairosenterprise2067 Жыл бұрын
How is the machine washed ?
@PARKINGS480
@PARKINGS480 5 ай бұрын
How much is this your extraction machine? I need it asap.
@LinusOdamaoko-cm1zu
@LinusOdamaoko-cm1zu 4 ай бұрын
How much for the G4 and the G3 please I need it.
@AyebaekipreyeHannah
@AyebaekipreyeHannah 2 ай бұрын
What about fufu pounding machine asking from Nigeria
@Odidimusestories
@Odidimusestories Жыл бұрын
Good digesters
@akeemagboola837
@akeemagboola837 Жыл бұрын
Where are you located? I think we can work together to improve the process.
@chukwumadike5577
@chukwumadike5577 Жыл бұрын
Please how can I get it, where is your location
@mouhamedmoustapha5274
@mouhamedmoustapha5274 2 ай бұрын
How can i get this machine
@izzu_1003
@izzu_1003 7 ай бұрын
How much does the G4 machine cost?
@sayoojo9372
@sayoojo9372 2 жыл бұрын
How can I get this equipment to buy. I am an oil palm farmer in Nigeria.
@johnarthur6209
@johnarthur6209 2 жыл бұрын
How much in Ghana cedis
@iweobodohappy3951
@iweobodohappy3951 Жыл бұрын
How much is this in naira equivalents
@akeemagboola837
@akeemagboola837 Жыл бұрын
The concept is commendable. However, there are lots of safety concerns for the operator.
@Odidimusestories
@Odidimusestories Жыл бұрын
How much for the first one n the second one
@agencetogolaiseatpec5388
@agencetogolaiseatpec5388 2 жыл бұрын
Très belle initiative
@lauraadaezeahuzi1852
@lauraadaezeahuzi1852 2 жыл бұрын
They are beautiful. I like them but the splash is too much. I wish they have cover to control the splash. ❤️
@finicindustries2787
@finicindustries2787 2 жыл бұрын
You are right. It was overloaded.
@welbornrobinsonudueni2170
@welbornrobinsonudueni2170 Жыл бұрын
Your location in Nigeria
@adams8335
@adams8335 2 жыл бұрын
I wish you could also showcase enterpreneurs who are using these machines in their projects🎉🎉
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Perfectly said and well understood. We will be showcasing them on this platform soon
@armstrongnnoli8725
@armstrongnnoli8725 2 жыл бұрын
@@finicindustries2787 that's nice. When are we expecting it showcased?
@solomoninin6752
@solomoninin6752 Жыл бұрын
How do you get extract the water from the oil
@DavidEnechojo
@DavidEnechojo Жыл бұрын
Please where is your location I need it
@IdikeGloriaOnyebuchi-ie3tc
@IdikeGloriaOnyebuchi-ie3tc 5 ай бұрын
I need it how do i get it
@samueladedayo-u9i
@samueladedayo-u9i Жыл бұрын
where are you located
@chukwuowofrank5074
@chukwuowofrank5074 2 жыл бұрын
Please how much does this machine cost and how do I make a purchase?
@dorcasobeng-davis9319
@dorcasobeng-davis9319 Жыл бұрын
Please I want the price please where is the location am in Enchi
@SamuelOtoo-s9d
@SamuelOtoo-s9d 5 ай бұрын
How can I get some
@Barlicazi
@Barlicazi Жыл бұрын
We need kernel oil mechine
@izzu_1003
@izzu_1003 7 ай бұрын
How do you turn the sludge to pure palm oil?
@finicindustries2787
@finicindustries2787 7 ай бұрын
You dilute the sludge and boil. Oil will float.
@augustinenwafor7673
@augustinenwafor7673 2 жыл бұрын
The sludge comes out of the smaller outlet. But what's the liquid that comes out of the bigger outlet?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Is the same sludge. The outlet for the nuts and fibre can not be 100% sealed hence the need to have a receptacle beneath.
@augustinenwafor7673
@augustinenwafor7673 2 жыл бұрын
@@finicindustries2787 ok thanks
@Odidimusestories
@Odidimusestories Жыл бұрын
The water from the host is it hot water?
@finicindustries2787
@finicindustries2787 Жыл бұрын
It is cold water but the best practice is hot water. That will increase the extraction rate
@janeolokpa6713
@janeolokpa6713 2 жыл бұрын
How do we process the palm oil ,after using the digested to bring out the sludge?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
The sludge containing the oil will be fed into a clarifier where it will be thinned/diluted by adding water and by boiling it till it reaches temperature of 100 degrees Celsius. At that temperature level, the oil will break and float for skiming.
@janeolokpa6713
@janeolokpa6713 2 жыл бұрын
@@finicindustries2787 Do your industry have the clarifier for sale?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
We feed the sludge into the clarifier and dilute with water. Thereafter, we apply heat to a temperature of about 100 degrees Celsius. The oil will float at that temperature separating itself from the water and other heavier impurities.
@evansnwoha6936
@evansnwoha6936 2 жыл бұрын
How can I get this Machine?
@BunilaFrancis-vo7ju
@BunilaFrancis-vo7ju Жыл бұрын
Need palm kernel oil medicine am in Cameroon
@agbanyokoamimessan3723
@agbanyokoamimessan3723 2 жыл бұрын
Very good machine. Can you deliver to Togo? if yes how much with shipping cost?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Yes, we can deliver to Togo. Our operations in Accra Ghana can manufacture and deliver to you with ease. Reach out to the General Manager of FINIC Ghana at +233 26 400 0480
@agbanyokoamimessan3723
@agbanyokoamimessan3723 2 жыл бұрын
Very well I will contact your base which is in Accra to discuss with him. Thank you very much and good day.
@agbanyokoamimessan3723
@agbanyokoamimessan3723 2 жыл бұрын
@@finicindustries2787 Very well I will contact your base which is in Accra to discuss with him. Thank you very much and good day.
@obas0weibo820
@obas0weibo820 Жыл бұрын
What is the cost for generation 4 from Nigeria
@armstrongnnoli8725
@armstrongnnoli8725 2 жыл бұрын
Is generation 3 and 4 the same input capacity?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Yes. They have the same capacity but with a difference in their robustness and hence durability.
@olatundejonathan
@olatundejonathan 2 жыл бұрын
This is fantastic... I have been viewing series of videos showing their locally made sophisticated equipment. I must commend the brain behind this technology. I would wish to patronise you soon. Pls kindly share with me your available contact in Nigeria. Thanks 👍
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Thank you very much. Our contact in Nigeria is +234 806 661 4112
@tinafuller3334
@tinafuller3334 Жыл бұрын
Where is your address in nigeria
@iweobodohappy3951
@iweobodohappy3951 Жыл бұрын
Your location please
@Barlicazi
@Barlicazi Жыл бұрын
Pls how can i locate u
@princetonyidahosa1902
@princetonyidahosa1902 2 жыл бұрын
Thank you FINIC sir, what is the cost prize of this machine
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Thank you for the inquiry. Please reach us at +23276601956 for a quote
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Hello Prince. Reach at +23276601956
@OluwashinaMoyegun
@OluwashinaMoyegun 6 ай бұрын
Were are they fabricated
@finicindustries2787
@finicindustries2787 6 ай бұрын
They are the industrial designs and fabrications of FINIC which is an indigenous small scale manufacturing business in Sierra Leone, headquartered in Freetown. FINIC has also expanded to Nigeria.
@msnelson6770
@msnelson6770 2 жыл бұрын
I love the idea but it can be improved. Not using buckets..
@ChuksNzeadibe
@ChuksNzeadibe 8 ай бұрын
Where is this factory and phone number ?
@robertlubang6836
@robertlubang6836 2 жыл бұрын
Yes finic is good
@obasivictor4779
@obasivictor4779 2 жыл бұрын
How much is 4th generation?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Please reach out via whstsapp at +232-76-601956
@Rekkish2016
@Rekkish2016 2 жыл бұрын
Am trying to contact you from Nigeria
@finicindustries2787
@finicindustries2787 2 жыл бұрын
My brother Callistus, have they not been able to respond to you? If that is the case, please reach out to FINIC Ghana at +233 26 400 0480
@humpherypaul5666
@humpherypaul5666 Жыл бұрын
Increase the size of the pot or reduce the speed of the hammers by adding gear...it will reduce sludge n increase oil without going Tru anoda boiling
@finicindustries2787
@finicindustries2787 Жыл бұрын
Sludge and fibre are two different things. High speed of beaters you refered to as hammers, will certainly generate more fibre that reduces oil recovery. In that regard, I agree with you. There are palm oil presses (take note, not digesters) that press out more sludge than a digester would do but such sludge is easier to clarify than that produced by a digester because it has less fibre.
@robertlubang6836
@robertlubang6836 2 жыл бұрын
Yes l could
@Monyplux
@Monyplux 2 жыл бұрын
Can I get it installment?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Did you mean paying by installment? If yes, no.
@Monyplux
@Monyplux 2 жыл бұрын
A lip on the top could be better....
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Thank you for the suggestion.
@kodokpecah6979
@kodokpecah6979 2 жыл бұрын
bahasa inggris anda buruk,apalagi anda teriak² seperti di kejar singa
@GgGg-mi2fp
@GgGg-mi2fp Жыл бұрын
Okl
@mohamedalliebarrie1490
@mohamedalliebarrie1490 2 жыл бұрын
Bonjour, c'est machine sont à vendre????? Vous etes Dan's quel pays? Please send your watshapp number to me.
@mouhamedmoustapha5274
@mouhamedmoustapha5274 2 ай бұрын
Good morning
@BunilaFrancis-vo7ju
@BunilaFrancis-vo7ju Жыл бұрын
Need palm kernel oil medicine am in Cameroon
@okortv5115
@okortv5115 2 жыл бұрын
How can I get some to buy
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Thank you Okor. Reach us to any of the contacts below In Sierra Leone contact us at +232-76-601956 In Ghana call us at +233 26 400 0480 In Nigeria call +234- 806 661 4112
@evansnwoha6936
@evansnwoha6936 2 жыл бұрын
How can I get this Machine?
@finicindustries2787
@finicindustries2787 2 жыл бұрын
Please reach us at +232-76-601956 by whatsap. Thank you for inquiry
@sikaedoh9668
@sikaedoh9668 Жыл бұрын
@@finicindustries2787 i need to buy this mashine
@crowntiger8590
@crowntiger8590 7 ай бұрын
What’s the price of generation 4
@finicindustries2787
@finicindustries2787 7 ай бұрын
$3 200
Palm Oil Processing - FINIC Generation 4 (G4) Palm Oil Mill Equipment
10:31
PALM OIL PROCESSING AND PRODUCTION  IN NIGERIA
13:22
Farmer Elizabeth
Рет қаралды 4,8 М.
Стойкость Фёдора поразила всех!
00:58
МИНУС БАЛЛ
Рет қаралды 7 МЛН
How I Turned a Lolipop Into A New One 🤯🍭
00:19
Wian
Рет қаралды 10 МЛН
Kluster Duo #настольныеигры #boardgames #игры #games #настолки #настольные_игры
00:47
World‘s Strongest Man VS Apple
01:00
Browney
Рет қаралды 33 МЛН
Palm Oil Mill - Mini of FINIC
7:18
FINIC Industries
Рет қаралды 14 М.
Palm oil processing in rural area
22:03
TourGecko
Рет қаралды 8 М.
BOI Weekly: Eye On Agro-processing Industries Pt.1
12:07
Channels Television
Рет қаралды 163 М.
Why palm oil is in everything, and why that's bad
16:00
Adam Ragusea
Рет қаралды 1,7 МЛН
Palm Oil Processing Machine of FINIC  ~ 2nd Generation (2G)
5:59
FINIC Industries
Рет қаралды 30 М.
Стойкость Фёдора поразила всех!
00:58
МИНУС БАЛЛ
Рет қаралды 7 МЛН