Panasonic CRT tv No Power Fix.

This next video is about a 30-year-old CRT tv. How to exit service mode. Not Turning on. Tips and Tricks. Please like, share, and subscribe. Thanks.

[@briliandt]

Ооо, кинескопный телевизор - классика. Люблю с ним возиться. Спасибо. Лайк!

[@zainulabideen1606]

Thanks for uploading such kind of videos. i want to ask a question if you don't mind. The question is ; what is a best solution if anyone found broken ferrite transformer in a Panasonic CRT 21" TV. i mean the E shape core not winding!

[@tevzTVTevatronics]

You can glue it but is better to change it.

[@zainulabideen1606]

Thank you very much for your prompt response. If flyback core accidentally break so can we glue it as well?

[@tevzTVTevatronics]

@@zainulabideen1606 yes,

[@sarathchandrawijesinghe817]

We understood easily. You are great.

[@tevzTVTevatronics]

Thank you! 😃

[@สุพัฒน์มองทัง]

Good great best job thanks for sharing 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾❤️

[@gabrielcuevas5837]

vamos a recordar!, saludos.

[@yeshuledtvrepairandd2hinst355]

Very nice

[@tevzTVTevatronics]

Thanks

[@shelby50411]

was the bad cap bulged top or no?...ive got a toshiba crt no pwr...no standby lights...no clicks...nothing..should i test caps near the pstransformer?

[@tevzTVTevatronics]

It was not. Check the standby supply, or the main power supply if has a voltage.

[@shelby50411]

hi standby is 0v

[@Fardeenfarwest]

Good job 👍 ❤️. If this 📺 TV was brought in my country to a thecnicians. He will say drop your contact number we will call back in 1 or 2 days. Will tell you about how much it will cost of the damage. And if they seen others thecnicians had work on it there loose soldering or desoldering. They will call you and tell the price will be twice because others thecnicians had done a lot of damage and don't know which value components they had change or replace by others and the working on the TV can more because they will have to check all the board. If you agree will work on it. And if you don't agree you can take back your TV but you will pay the cost consultant thecnicians for time on the TV.

[@tevzTVTevatronics]

Aha.. where is your country?

[@Fardeenfarwest]

@@tevzTVTevatronics am from Mauritius 🇲🇺

[@Fardeenfarwest]

@@tevzTVTevatronics and I think you're from Malaysia

[@Fardeenfarwest]

@@tevzTVTevatronics if you come in my country for this work thecnicians led tv. You will got a lot of work. That's sure. 😊

[@tevzTVTevatronics]

@@Fardeenfarwest I'm from Pilipines

[@irfanshafiqueelctronics5257]

techer exelint information ic prtection pin

[@Rainbowqueen500]

hi, i have a Panasonic TC-21S1R tv that my son uses for old gaming and he also has autism. Over the last couple of months i have had a problem, the tv turns on then starts flicking real slightly, and when i slightly tap the side of the tv it goes back to pure black and stops flicking, it would be ok after being on a few hours. recently it has got worse, it flicks then has these white lines throughout out the screen and then shuts off. my son loves his tv and is very upset when this happens. would appreciate any help or advice, thanks.

[@tevzTVTevatronics]

it may have cold solder joints,

[@richmah100]

@@tevzTVTevatronics i think so

[@josephmenezes2580]

Lg tv no 12v no 5v or 3.3v in fact no volts at all. On main board I get 3.5v 12v and 24v Where do I find dc to dc converter on this board?

[@qaisarabbasi2219]

I have same tv output 95 volt appere then set dead

[@herosk4434]

Very nice

[@tevzTVTevatronics]

Thanks