Panzerkampfwagen IV Ausf.H (Academy 1/35 scale model)#30

[@peterkkpoon6546]

I learned your technique sometime ago. I printed my mini tanks using the same method of yours. Thanks.

[@lamexpard675]

Hand paint 1/35 scale is quite hard,I think,but you done it perfectly

[@Modkits131]

Very nice work on brush painting, I my self brush paint my models as well👍.

[@tiddlywinks497]

Oh wow, you use the same materials as me, glad to see that I could actually get a good finish with them like yours!

[@paulchieza5837]

Very nice painting so you can use tamiya to hand paint models 👍👍

[@allgood6760]

Nice! 👍

[@PiperStart]

Excellent model, I am doing the tiger by hand brushing.

[@Chilhada]

Thank you for watching. Hope you have good results.

[@DonSatman80]

Wonderful!!! 🎨

[@고군분투-h2c]

여전히 섬세한 손놀림. 오빠는 부드러운 남자야.😚

[@anthonylamb8265]

Hello there. This is a great video and did you film the building of this model up to the painting stage ? Thanks.

[@Chilhada]

Unfortunately, I didn't record the assembly, but this model is easy to put together. Thank you for watching.

[@commandercat2443]

Idk if im doing something wrong but when i used xf59 it looked very orange

[@mrobsidian1977]

Do u Add water to Acrylic varnish?and why you paint hull red and Paint it desert yellow?, good Paint and build Keep up the good work👍😊

[@newomi382]

안녕하세요. 항상 참고하며 이것저것 영상찾아서 보고 있습니다. 또 몇가지만 질문 드릴게요 1.데칼 붙이실때 반광 바니쉬 먼저 발라주는 이유는 뭔가요? 2.주로 칠하다님의 탱크관련 영상을 많이 보는데 기본도색후의 작업순서가 랜덤인거 같습니다. 어떨땐 패널라인 작업하시고 하이라이팅을 한다든지, 이번엔 하이라이팅을 먼저하고 웨더링하는 중간에 패널라인 작업을 하시네요 어떤 규칙이 있을까요? 3.모든 작업이 끝난후에 무광 바니쉬로 마감을 하시나요? 항상 감사드립니다~

[@Chilhada]

1. 흡착 빨판이 유리창이나 거울 같은 매끄러운 표면에 잘 붙는다는 점을 떠올리면 됩니다. AFV모형은 데칼이 몇 개 없기 때문에 데칼을 붙일 부분만 유광(또는 반광)으로 만들고 데칼을 붙인 후 그 위에 무광 바니쉬를 칠해서 주변 광택과 같게 만들어 마무리합니다. 2. AFV모형은 기본 도색 후 드라이브러슁(하일라이팅)이나 모형의 윤곽을 드러내는 작업인 핀워싱 같은 기초적인 작업만 해주더라도 제법 근사해 보이는 모형을 완성할 수 있습니다. 기본 도색 이후의 작업 순서는 사용하는 도료나 재료의 성질에 따라서 달라질 수 있습니다. 3. 제 경우 무광택 도료로 완성하는 AVF모형에는 마무리로 무광 마감은 하지 않습니다.

[@c1berg451]

I noticed you didn't use gloss varnish before weathering, does it make any difference?

[@Chilhada]

I use glossy varnish for panel line washes and decals on airplane models, but I don't use gloss varnish for military vehicle models. It may get dirty because the surface is not smooth, but washing a thin layer of enamel or oil paint can add a matte and rugged surface feeling. Thank you for watching.

[@고군분투-h2c]

오빠 멋져요

[@igorsevcov4081]

👍

[@aaaraaa-d9t]

구독자 300명이 코앞입니다!!

[@madhead311]

Hello, do you thin Tamyia acrylics just with water?

[@Chilhada]

Yes, I usually use water to thin Tamiya acrylic paint.

[@NoOneAlive_]

@@Chilhada I got a question. What is the ratio to thin it down with water? I just started modeling and if possible I really wanted a good result with a brush only. Thanks in advance!

[@Chilhada]

The way to thin Tamiya acrylic paint with water is to mix 30% of the water with the paint. Before you paint, wipe the surface with a Wet Wipe and then apply acrylic paint to a thin layer on surfaces and repeat 3-5 coats when it dries. Don't try to paint it all at once. The drying speed of Tamiya acrylic paints is pretty fast than other acrylic paints. We can speed up the drying time by using a hair drier. Flat brushes are great for wide strokes and suitable for a thin coating. I use is the synthetic flat brush(11.5mm, 10mm, 7mm, 5mm). An 11.5mm flat brush is used for applying varnish. Thank you for watching.

[@NoOneAlive_]

@@Chilhada Ahh I see, thank you very much for the information!

[@buthead4688]

붓도색으로 위장무늬 좀 보여주세요 저도 붓도색만하는데 항상 위장무늬에서 항상 애먹음

[@demonhand]

Anyone know why he layers different colors on top of each other? Why Hull Red > Desert Yellow > Desert Yellow + Dark Yellow? Why not just all Desert Yellow + Dark Yellow?

[@NoOneAlive_]

I'm no expert but I believe the Hull Red is for priming the model first with a darker color and the Desert Yellow + Dark Yellow to make the color blend in and to make it a little darker.

[@UpToSpeedOnJaguar]

@@NoOneAlive_ The red color is actually what germany primed many of their tanks with, so it would be more accurate to see the shades it would create in recesses if it were to show through at all. Was a really nice touch.

[@NoOneAlive_]

@@UpToSpeedOnJaguar Ahh, I see

[@dmaster_1]

And what did you dilute the paint with?

[@Chilhada]

I usually use a small amount of tap water to dilute acrylic paint.

[@dmaster_1]

@@Chilhada Wow! I did not think that Tamiya paints (they are alcohol-based) can be well diluted with ordinary water. Thanks for the answer! The tank turned out very good!

[@Chilhada]

​@@dmaster_1 It can be diluted with water. For glossy colors, it is better to dilute it with Tamiya X-20A acrylic thinner. Thank you. Happy new year.

[@dmaster_1]

@@Chilhada Happy new year for you too!)

[@adrianbagoes2158]

What the purpose of the base coat?(the hull red)

[@tlswoals]

타미야 티거 후기형을 저먼그레이로 칠할 예정인데 처음이라 떨리네요

[@Chilhada]

어떤 종류의 도료를 사용하시는지 모르지만 최종색이 저먼그레이인가요? 저먼그레이의 경우는 불투명도가 좋기 때문에 여러번 색을 올리지 않아도 밑색이 잘 가려집니다. 좋은 결과가 있기를 바랍니다.

[@tlswoals]

Chilhada 칠하다. 타미야 에나멜이에용