His FIRST TIME Wrapping A Truck, RAM REBEL 1500 In Nardo Grey | Measuring 60 Feet To Fit Any Truck

[@jessminahan5037]

This looks wayyyy better than the purple Corolla. He did a much better job this time around! Good job my guy!

[@craig4926]

its good for only his second time. my first time took me 4 and 1/2 days. i spent 1 day taking everything off, handles, mirrors, bed caps, lights ect. was well worth a days work and made the process 100 times easier. and for reference i needed 90 feet of material for a crew cab truck because i had fender flares to cover and both bumpers.

[@dskim5848]

Grasshopper learning good. Trucks are a pain but lot of truck owners want to wrap. The pigs look so happy in their kiddie pool.

[@rsentes1975]

Seeing those door jams. I wanna get some wrap and try wrapping my jams.

[@RyanOder]

Paradox! Hey dude, Ryan here out of Evansville, IN area. Hey I watch your videos weekly. I’m a vehicle wrap installer myself (one man installer) I wrap ram trucks all the time. To answer your question about the gap between bedside lines and wrap around to rear window area…so I prep clean those areas very well first off, next I’ll run the 3M knifeless tape like your buddy did, if you don’t have the extra labor time involved to remove bed side and slide it back some to get full coverage. But if you follow your eyes at the bed side lines, it cast a slightly dark shadow on the wrap around edge and that’s where I run the knifeless tape is by following the shadow lines from top to bottom. The reason I do that is because our fingers can only go so far behind there before the vinyl starts to give out and want to wrinkle with such a crazy challenging wrap around edge. If you just follow the cast shadow lines closely, it will make your job way easier if you don’t take the bed side off. As for the back rear bed side by bumper area…again, I lay knifeless tape on that edge starting from tailgate and run it around and down to the bottom area off the body line and once installed , I zip and tuck for good quality. After a wrap is done, I recommend going the extra mile and running 3M 1inch clear tape strips around those bed side bumper wrap around edges and by the wrap around gap by front side bed line areas. It will protect those areas from pealing up and keep rain from getting on those edges.

[@ParadoxTheWrapper]

Yoo thanks for the tip my dude! But I think I’m just gona stick to cars for now lol. Unless there’s an offer I really can’t refuse I wouldn’t wanna do a truck until I get like a big ass wear house

[@arshaadcreighton5134]

Hey Ryan. I have experienced a small issue. I have wrapped the front fender of a w204 mercedes and the inner groove where the front fender meets the quarter panel pillar, the clear coat happens to have separated from the paint and is now stuck to the vinyl. I now have a small flapping piece of vinyl on an edge which is quite discrete and not in the eye but i was wondering, that 3M tape you mentioned. Would that in any way work to sort out that issue without having to redo the entire fender. If so, what specific 3M tape is it?

[@OaklynMediaLLC]

Trucks are nice because a lot of the car is flat panels I remember when I shot video for a wrap company for a while they'd wrap panel vans so quick because of the flat sides

[@sgreene2036]

Nice job! As far as your question about how to get between the bed and cab. As a painter my solution is just remove everything in your way. Awesome job guys!!

[@FrankA-973]

You can remove the bed bolts and slide it back a foot with enough room to wrap the back of the bed and the cab. You will have to remove the rear bumper first!

[@ParadoxTheWrapper]

Dang that sounds like a pain in the ass

[@OutdoorOdyssey]

@@ParadoxTheWrapper its not, if you have an impact drill it will take you 20 mins. only issue is youll need help to pick up bed and slide back.

[@CodyandCodyTV]

Without removing the bed slide the vinyl with backing paper between the bed and the cab. Once its as far back as you need it slowly remove backing paper while keeping tension and you shouldn’t have issues with coverage.

[@haynkokanut]

...Let's get dangerous!! Darkwing Duck!! Lol good times! great vid!

[@jeffirvin4969]

Hey Paradox. I been wrapping for about 3 yrs now out of my garage in CenCal and still not nearly as quick or efficient as you but I was wondering if you get many come-backs due to peeling since you don't take anything off most of the cars? I have to spend at least a whole day just removing bumpers, mirrors, handles, etc. I'm honestly wanting to know since that would save a ton of time in disassembly and reassembly. I just don't want a bunch of clients coming back because of peel back. Congrats on the new place and cant wait to see ya get that warehouse next. Also its getting real hard to find vinyl supply right now, no?

[@golfguy6071]

Love the dark wing duck.

[@brianneal9204]

I always cut the doors long ways so there are no seams. handles and mirrors off make the job so much easier

[@brainium4897]

Not bad for his second full wrap big ups to your buddy 🤔

[@TypicalToyReviews]

DACHIE?

[@SkywalkerOGK]

Lo Sean???

[@ericperaza8183]

Dark Wing Duck is Classic💯✌️

[@JoseRamirez-od4tb]

When there’s trouble you call D W!

[@IIIDemon]

LETS GET DANGEROUS!

[@scienzchic1]

Piggies in thier little pool are so darned cute!!!!

[@nickolassmaltz9546]

Thumbs up for the dark wing duck reference.

[@MarkCarr331]

Great work..I just got my roll of wrap.. time to get started on my first car

[@Mathewlarge]

I love that color on that truck!

[@chinito20fam]

So am going to save money and get things for my csr and wrap., Good News. I never painted my csr so judt a but of cleaning the csr and judt practice makes better progress.. and only con for me is i dont have a garage. Side of the house am able to go behind the house and work on it perfectly. But risk naild getting to the tire family member had a bad habit of not cleaning hia side. Going to try out the red darl Rose. Or as starters the old truck and get it for practice. Thanks for the tips.

[@Chris98346]

You have to take the truck bed off to get back there. Behind the bed. I believe it is 6 screws that hold the bed in place.

[@belcebu5907]

One question whats wrong if you put soap n water

[@tameshalalife]

Yooo!!!!😂😂😂😂 it is the color of darkwing duck!! Oooohh

[@DungeonProtoss]

Dark wing duck! Yas!!!!

[@Milehighsnake98]

I get the Darkwing Duck reference!

[@shanerobinson6776]

Nice colour 👍

[@formula7414]

Only way ive ever seen truck cabs done is when the bed is removed. You can pull it loose and slide it back on the frame a couple of inches to wrap between it and the cab.

[@balkee42]

How well do wraps like this hold up in the sun,rain,pollen etc.? Do they fade or anything also? I wanna do this to my tundra. This same color.

[@nickizcool20]

2:58 😂😂😂😂😂😂😂😂😂 HEY STOP THAT!!!!

[@madchild2389]

Guys rockin the kim jong cut ahah

[@skrapppy7814]

QUESTION . … ?? So after you finish wrapping the car you have to let it sit on the sun ?????

[@ParadoxTheWrapper]

Yes, the sun will show you if you did it correctly

[@paintmaster8843]

that is also a reason i dont buy from paradox because he doesnt sell 75 ft rolls or 81 ft

[@bluefeathercalnimptewa4307]

I'm still undecided on which color to get, but as you said get a couple of wraps and try it out first to make perfect"

[@chrisoliver5911]

Real shame this wasn't broken down into a series of 4-5 videos to really show the process and Matt's overall progress, right through to the final end product. I would love to have seen what it looked like finished and to know what Matt's story has been since his first 2 attempts on this channel. It feels like a story that has no ending. Did Matt complete the truck? Did Matt go on to wrap other vehicles? Is Matt making money from wrapping other people's vehicles now? Ya know . . . what happened to Matt in the end??!!!

[@Kevin_Yagoonie]

How much wrap did this truck use?

[@ryandriverhidatsawarrior3034]

I had a Tuff ass time on the lower cab corners that’s exactly how mine came out . But I will figure it out lol

[@MrAustin27]

R&i is tuff to learn

[@thetranclancan7690]

First! Always down to watch paradox

[@nitrous07me]

Matt graduated

[@bcdoll01]

How long does a wrap last

[@arshaadcreighton5134]

It can last for years dependant on two factors. The quality of install and the type of colour or brand you use. Eg a chrome or flourescent colour will be more vulnerable to outdoor conditions than a usual gloss or satin finish.

[@Jacob-ol6ex]

Shouldn't the paint be clean so the wrap adheres well?

[@AlexTurbo]

Yes, looks like they cleaned it before cutting the wrap sections

[@ModernDayProspector]

Where are you located ? @paradox

[@hondarider210]

do you have plans to wrap some bodies car in millennium jade? I really wanna see it on car before I buy it.

[@alexbui5361]

I heard that Cali temperature is super hot 🔥🥵 these days, maybe that's the reason Paradox hasn't got his t-shirt on ?

[@ParadoxTheWrapper]

Ya it’s like 105 here, paradox gets naked in the summers

[@wingitreview]

what to do is have bubbles

[@miyazagi]

A TITAN job un trabajo TITAN.

[@Scammerskull]

it took me 4 hour to work between the cab and the bed of the box

[@RCman9291]

A ext cab truck is normally a normal door in front and a suicide door in the back or on dodges it is half the size of the front door but opens like a normal door so i can get wrap and do my truck easy if he could do that truck with a roll 😋

[@johnnycashh7148]

Almost ready to be 🍽 😂

[@longowraps2095]

I’m on my 2nd vehicle 🚗 still not confident

[@phandnot]

Do the hood! Some cars are ok without, but that truck needs the hood and rood done! For the love of God, do the hood!

[@ParadoxTheWrapper]

It’s up to him to take the next step and finish

[@robertwarren4667]

my cousins truck was done bed was unbolted and slid back

[@Thee_Kevin_Vegas_Guerrero]

Paradox doesn't do trucks but does he do old SUVs ?? (just hood & sides , no roof) on a 2001 Ford Expedition 🤔🤔🤔

[@kumaboyy.7443]

What about the inside of the bed? I don't think it is worth wrapping a truck! It ain't easy to wrap like a pro, Paradox! Luna needs a pool!

[@SydeshowMO]

Beds are typically lined. But yeah if no liner your right, I wouldn't wrap it either.

[@trcythmpsn]

That chinese vinyl sounds thick as hell.

[@jaybasezoolander6365]

🔥🔥🔥

[@paintmaster8843]

if customer is not willing to pay to remove bed.. then ill do inlays on the pillars insteas of a full piece

[@DrivenMars]

“This own truck”? Is that a typo?

[@TypicalToyReviews]

Yeah my mans meant "his own truck"

[@ParadoxTheWrapper]

Fixed lol

[@justinfrench2529]

Just do the good last and if anything go black on the hood

[@abornrebel6792]

Legit this is what I plan to do with my truck. I just need the money first

[@Fxstneem]

is your pfp your truck? if so thats sick

[@abornrebel6792]

@@Fxstneem it is. Ram rebel, highly recommend to everyone!

[@icybaby210]

Already to be eaten 😂 poor piggies 😂

[@TypicalToyReviews]

"wrapping this own truck" HUH

[@ParadoxTheWrapper]

Fixed lol

[@TypicalToyReviews]

@@ParadoxTheWrapper all good bud lol

[@MINHTUANWRAPS]

bought a new house?

[@jeffswartz6495]

That front bumper is absolutely hideous

[@Bearded_Spectre]

You pay attention to details that others do not. Not bad for a first/second time, but definitely needs improvement.

[@dullc22]

Do you charge extra to wrap the cars topless? 😂

[@ParadoxTheWrapper]

About to start an onlyfans

[@wmdproduction6446]

Now I KNOW Y U DONT DO SUBURBANS

[@5.7ram93]

All this truck needed was a nice paint correction.brilliant black is such a beautiful color but not my truck my opinion that color is ugly as hell

[@darealmikeg]

Dang 2nd, but entertaining video!

[@SydeshowMO]

Trucks are a PIA. Mines lifted on 33s and I needed a ladder to do the cab. Got half way thru and fucked up. Wasted $400 in material SMH

[@kennyman338]

What's with the janky ass cuts with the vinyl.

[@ParadoxTheWrapper]

That’s what happens with new wrappers

[@vincentwebster8313]

SOOOOOO we arent showing anything but a 1/2 naked guy....

[@LockedDownJoeBiden]

Small trucks are easier than big trucks

[@littleredridinghood5622]

HAHAHAHHH ... You should have had a larger garage built..

[@benth162]

Why would anyone put Nardo Grey (what we used to battle ship or aircraft grey) That is one of the worst colors you can put on a car because it is so nondescript. IE: Blaze'

[@randylima6254]

About a feet over lmao