Parametric Architecture (Schüco Parametric System)

In this Parametric Architecture video we will take a look at the Schüco Parametric System and how it works. Then we will model the panels in Grasshopper by producing a base surface and then dividing the surface in to panels. We will also use a range of numbers combine by Graph mapper to produce a sine wave.
More info about the system👇
www.schueco.com/web2/parametr...
Download example file from👇
bit.ly/2M3VAZv
Want to learn Grasshopper step by step❓
Enroll in our Course👇
bit.ly/paracourse
👉 Subscribe to our KZbin channel 📹
kzbin.info...
Want to know more about us❓
Follow us on Twitter! 👁‍🗨
/ parametric3d
New to Grasshopper❓
• What is Grasshopper3d?
🗣 And hit that bell notification button! ⏰
👍 Like our videos to hear from us more often! 😊
Comment below to support us! 📝

[@hakimabdullah1965]

Basically I'm just a new learner in Rhino+Grasshopper...I don't have any mentor...but this channel 'Rhino Grasshopper' is my great mentor..thanks for sharing your valuable knowledge and may God bless you and people surrounding.

[@kuneyatheesh9084]

a very good tutorial that even shows the technical details of the facade system. Thank you so much Parametric 3d

[@ParametricHouse]

You're welcome glad that you liked it🙏

[@thirtysixzed]

Grasshopper is so damn complicated but when it works, its beautiful!!

[@ParametricHouse]

Exactly! The process takes time but the results are great!

[@silki_net1589]

@@ParametricHouse where from download remap +?

[@FlexEthos]

Lovely clear process - can't wait for more!

[@ParametricHouse]

🖐🙏

[@vladislavsmirnov2252]

Amazing tutorial, thank you so much~

[@parimalvala8742]

Thank you Very much. It simply Awesome...!!!

[@dileepprabha]

Great tutorial, thanks

[@martinliu6690]

Thanks for your tutorial！It helps me to understand the UV

[@ParametricHouse]

You're welcome

[@neerajpal8922]

Great video, especially to understand what various components do, and great explanation from you guys, keep it up

[@ParametricHouse]

Thanks Neeraj

[@rajkumar_gr]

Loved it!!!

[@porschepanamera92]

Really simply done. I immediately thought of connecting points and lines in separate cells and such, but this option is much easier. Just using lofts and end caps. I'm going to look more into isocurve and isotrim. Thanks!

[@ParametricHouse]

🙏 exactly this can be done in many ways

[@islandersean2213]

Amazing 👏

[@waelsoliman9815]

Perfect tutorial as usual

[@ParametricHouse]

:)

[@ozgurbulutgumrukcu746]

Looking forward to see that

[@ParametricHouse]

🙏

[@wwjj7105]

Very nice tutorial ! THX

[@ParametricHouse]

🙏

[@jingxu551]

That's so cool

[@anna-ff9uw]

Great video, can you show more about how to continue to do the window frame?

[@mohamedelabasery475]

good job sir .. its simple and great

[@ParametricHouse]

🙏

[@nickpunch9661]

super complicated!

[@lokezhiming]

Hi, thanks for the tutorials. Am actually curious about the Lunchbox Plugin that was used. Do Lunchbox components actually combine a series of operations that can be done with the original Grasshopper default components ? As in panelling can be done with default GH components but it is much more troublesome so Lunchbox makes paneling much easier and more efficient ?

[@ahmedkhamis3228]

THANKS FOR THE TUTORIAL BUT I HAVE A question how do you make the mullions ?

[@parastormlab4866]

Good job 👏

[@ParametricHouse]

Thanks

[@januarsutandi947]

Great tutorial. Can you inform me , from model in this rhino, what file we must export to, so it can produce to more detail join on facade aluminium profiles

[@interstellarart8432]

Great fun

[@ParametricHouse]

😃

[@cafier]

Bravo

[@ParametricHouse]

🙏😊

[@ilksenizleaboneol4456]

amazing channel

[@ParametricHouse]

Thanks😊

[@ilksenizleaboneol4456]

@@ParametricHouse could you add this facade profile mullion

[@thamerhossin]

woooooooow!!!

[@fafadviser7359]

Bold fantastic

[@ParametricHouse]

🙏

[@javizagala9770]

The process makes the window panes, but how do I make the window frames? any tips? thank you

[@KizHrgetic]

Hi! I was trying to do your tutorial but could not go further than minute 7 :( I havent got lunchbox and could not find the download for macbook. Instead of "quad panels" i've tried using isocurve and divide domain as youve stated, but the results are not the same as in the tutorial. The command is dividing all the series together in an awkward way. Any ideas?

[@adhamelsharqawy9964]

at the end, the loft done at the opposite direction, what should I do please to reverse the loft direction

[@izoyt]

what's the cost against your regular panel glass facade per m2 and how much additional on-site work? roughly.

[@BitaRostamiyar]

what needs to be changed if we want the middle lines, you refered in 10:17, to be rotated centered to one of the end of the line?

[@quangle-ke8nn]

hello brothers! where can i download this plugin .. i want to learn from you a lot . You are really good at planning and mastering this software.

[@zozoram759]

I have a question and I hope you help me with my project,, I did the same thing but in a flatten horizontal surface, and my question about the movement (Hight) in the minute (14:50), how do I make that rhythm of the movement? I mean I do not want them all at the same level of height. hope it is clear. and thank you.

[@anikan865]

12:57 hi there I connected the plane with the panel to see those green square grids(planes) but I don't see them on my screen😁. I'm new to rhino grasshopper help!

[@ioanaclaudia7906]

Hey! amazing tutorial! unfortunately, I can't seem to be able to join all the curves under one curve group. Any ideas why?

[@andrewblades6408]

Hi Ioana, if you hold the shift key when selecting the curves you can join them all to the new curve. I hope this helps! :)

[@hailzetan]

I was waiting for the scale or subcrv on the 3rd curve before lofting

[@ParametricHouse]

Yes! You can also add the scale to the algorithm

[@dawaadumasa1150]

how do you connect the surface to the plane then to the vector if we are using isotrim rather than lunchbox

[@ParametricHouse]

You have to go with evaluate surface to bring out the normal

[@jnoothan]

i got screwed trying this because i got problem with divide domain, because of the first step extrude u have done, i did extrusion from curve using extrude and surface using unit vector, that gave me problem later, anyway good tutorial :)

[@ParametricHouse]

Tanx Just a quick tip, remember to explode the surface when you extrude it in Rhino so u can be able to import in Grasshopper

[@eren0701]

I still can't get the remap+. ghuser file on my grasshopper canvas. Could you explain how I can add it. Because nothing happens...

[@ParametricHouse]

Download it from Bit.ly/remapplus And drag it on your canvas

[@alexandreroque8195]

@@ParametricHouse I know it should be simple.... but it simply doesnt work... Does this has to do with my Rhino/Grashopper version? I'm with Rhino 5, Grasshopper 0.9.76.0

[@ParametricHouse]

Try taking a look at the example file + Bit.ly/remapexample

[@eren0701]

@@ParametricHouse it actually worked thank you!

[@plataformabim9338]

Where may I find the Revit tool tutorial?

[@ParametricHouse]

What Tool do u mean?

[@plataformabim9338]

@@ParametricHouse The Revit free plugin from this page: www.schueco.com/web2/parametric_en

[@mohamedelabasery475]

how can i download remap

[@ParametricHouse]

You can go to parametrichouse.com and download it from the sidebar

[@xarwu1125]

maybe that the mid line need be scaled will be better

[@ParametricHouse]

Exactly a scale on the mid center can do the job

[@ParametricHouse]

In this Parametric Architecture video we will take a look at the Schüco Parametric System and how it works. Then we will model the panels in Grasshopper by producing a base surface and then dividing the surface in to panels. We will also use a range of numbers combine by Graph mapper to produce a sine wave. More info about the system👇 www.schueco.com/web2/parametr... Download example file from👇 parametric3d.com/schuco-param... Our free Tutorials👇 parametric3d.com/rhino-grassh... Enroll in our course and learn more!👇 paracourse.com Join Our Instagram👇 instagram.com/parametric.3d Facebook Page👇 facebook.com/parametrichouse 👉 Subscribe to our KZbin channel 📹 kzbin.info... 🗣 And hit that bell notification button! ⏰ 👍 Like our videos to hear from us more often! 😊

[@Siltrox]

Thanks for your tutorial !

[@surferboy198]

Grasshopper looks so easy compared to dynamo lol. It's much more intuitive then dynamo.

[@ParametricHouse]

It's definitely easier and more user friendly😉