Rhino Paneling Tools tutorial

[@merminotaur]

Holy moses, this guy's a wizard. Great tutorial.

[@ParametricHouse]

Glad you found it useful 👋

[@aaronpierce8836]

82,600 folks just upped their Rhino skills. Thanks!

[@info212011]

What an excelent tutorial, concrete, efficient, comprehensive and interesting, thank you so much!

[@wapo_t]

You are OUT OF THIS WORLD. So good! Thank you.

[@ParametricHouse]

Glad you like it!

[@garydawson8972]

Amazing, thank you. For me a classic example of Rhino's breadth and depth. I've been modeling for years and this is new for me. I'll be installing Paneling Tools for sure!

[@TheFlyingEpergne]

you done changed the game man

[@ParametricHouse]

🙌😊

[@edwinbohdan1011]

Firstly fantastic tutes, informative and easy to follow. Almost couldn't get the 'VariableOffsetSurface' to work but I changed the tolerance to '1'. I think because I'm working in millimetres and with large building scales.

[@honorendacyayisenga8290]

thank you for your sharing

[@puyakhalili]

Thank you very much. This was an incredible simple fast and clear tutorial. Super useful 👌🏽🙏🏽🙏🏽

[@ParametricHouse]

You're welcome glad to hear that

[@gabrielhernandez-do8qn]

geezy lousiesey, this guy's mans a magician. fabulous walkthrough. Why haven't you responded to me yet?

[@BPM28]

Simply the best tutorials. Many thnx!

[@ParametricHouse]

🙏

[@전은지-d8x]

Amazingly simple and informative tutorials! Thank you!

[@ParametricHouse]

You're welcome!

[@AnnaChase]

It would be huge if you could give a tutorial showing how to make chain mail...2D....and then show how to pattern it on complex surfaces....like a chain mail sleeping bag. Or, which videos have you already made that I can check out that would help me to do that? Thanks in advance. These videos are great!

[@jcu321]

Hello, trying this in Rhino 7 and hitting CRTL while adjusting gumball enables gumball relocation (does not isolate movement in z and perform extrusion) Ay advice would be appreciated!

[@kmjulkarnaieensajin4584]

how did you pressed ctrl and selected 'on surface' at 12:27 ?? mine just gives nothing

[@studio22a34]

How would you use the panneling tools if you wanted to panel a polysurface? For example a tower

[@itaca5352]

increíble tutorial! mil gracias! super claro y concreto :D

[@wesleyg2585]

Awesome tutorial, great work!

[@ParametricHouse]

🙏

[@R00ZBEH]

Thank you so much ❤️ this is exactly what I needed 🌹🌹🌹

[@ParametricHouse]

You are so welcome

[@harukai1429]

Amazing tutorial! Thank you so much!

[@ParametricHouse]

You're very welcome!

[@LlewynDaviesTheThird]

Great tutorial

[@ericadewitt1446]

incredible tutorial. thank you!

[@Argyll9846]

Very comprehensive.

[@lucaalessandrini]

Hi, can I ask you why you are not using the regular grasshopper interface???

[@giovannamilanicaparroz1857]

nice work!!! congrats!

[@molotoboets]

Fantastic stuff, just installed plug-in, thanks.

[@ParametricHouse]

🙏

[@ahmadkhaled28]

Is the plugin free? And where can i grt it

[@molotoboets]

@@ahmadkhaled28 It's free, www.food4rhino.com/app/panelingtools-rhino-and-grasshopper

[@tarakatanchi8490]

Hi, very useful tutorial. do you have the panelling tools link for rhino 7?

[@franzschaffer368]

Hi ! Great tutorial ! How did You get the "Paneling Tool" in the command line ? I can access the commands only by "WINDOW - Active Tool Palettes - ....... ". I find the way through pull down menu more intuitive. I have Rhino6 for Mac.

[@MadeInPoland182]

Hello, can you help me find the right functions in the newest version's interface? I think some options from the top toolbar disappeared and I cannot start with basics.

[@interstellarskunkworks8283]

Where is all this stuff in Rhino 7? They’ve replaced the “Panel Tools” option with just a “panels” option. And I can’t find any of the tools this video demonstrates. I typed in “ptSurfaceDomainNumber” in the command bar, but it doesn’t recognize it.

[@saracavalieri4540]

Really useful video! Thank you! :)

[@jonathanmchugh8698]

Thank you for the great video! I am not able to use the control key as you do. For example when you extrude the diamond curves it moves my gumball tool instead of extruding the curves. Another example, when you place the point on the surface by pressing control, more osnap options appear but that is not the case for me, I do not see the on surface option.

[@ParametricHouse]

You're welcome Jonathan. If you are using Rhino 6 simply use the little dot on the Gumball to extrude things.

[@jonathanmchugh8698]

Parametric House thank you! I am using rhino 6. Any idea why I do not see the “on surface” option?

[@byc6230]

@@jonathanmchugh8698 same here, can't see "on surface" and can't use control as he did.

[@anasbelahodod4682]

@@ParametricHouse same problem ?? :( what is control key

[@keisukematsushita3977]

Hello, thank you for the tutorial! Is it possible to leave empty space in between the panels?

[@ananasa3805]

let me know if you come to know

[@chinchan9]

Is there a Rhino for free or hobby use? looks like Rhino works allot more fluid for certain things.

[@alexfireblazeking]

how do you turn on control key(that red, green, blue coordinate system that appears when you click on an object) ?

[@ParametricHouse]

Be sure your Gumball is turned on (Down the working space in Rhino)

[@alexfireblazeking]

@@ParametricHouse thanks, i have just figured it out :D

[@kyokomogami3463]

I could not find paneling tools😢

[@edwinbohdan1011]

@@kyokomogami3463 it's a plugin you need to install. It's on the Rhino / McNeel website

[@KripaPanjari]

Im trying to make a grid and its going beyond the boundaries of the surface. What should I do?

[@AlanReyna13]

I have a problem with the offset faces border, any number i write in distance it does not offset any surface border nor make a hole, it just doesnt do anything. Any help?

[@usamacnc1]

THANK YOU

[@phaneendrab2789]

Hi, It is really helpful to understand the paneling tools. Although i have a few doubts while using paneling tool. I need a "custom 3D" pattern on a free form surface. I followed the basic steps to get the result. The end result is, I got the desired pattern i wanted. However there was a problem. After the pattern is finished it created many individual single elements. Even though i tried doing "Union operation" which are not combining with each other. . I tried to convert it into .STEP file and try in another software but still they are not combining. Is there any way to make them as a single body after paneling or Is there any option to do that while using paneling tools? Thank you and waiting for your feedback.

[@ParametricHouse]

Try to make a single module so you can boolean union them after the paneling

[@andreastangoni3373]

Hi! is it possible to do this starting from a scan? (Using MeshtoNURBS first)

[@하영-u5i]

thank you soo much!

[@aseelalmutairi3434]

Hello, I am using Rhino7 and i cant find the paneling tools

[@karlsonty]

Love it man!

[@khaled1saidi277]

Awesome 🤩

[@AsadAli-by9wh]

Sir plz tell how to project or flow and object to a particular surface perfectly. I use smash and flow on surface but object flowed not perfact.?? Just tell the command i will try plz.

[@B-water]

you are marvelous !!

[@valentinaramirez6032]

Hiii, I used your link to download the paneling tools but when I click on the "triangle" option i dont get all of the options that you do. Is there something I can do?

[@ParametricHouse]

Hi check out the Food4rhino.com website for the latest version

[@yaenemmauel3053]

Hi! truly amazing show of the panelling tools, with a trimmed surface like a planar surface how would be your aproach? Thanks Again. PD I´ve just 3d printed on a Prusa I3 Mk3s the camboo pavilion following your tutorial from parametric house, sadly can´t post any photo here where should I share it?

[@ParametricHouse]

Thanks Yaen For trimmed surfaces it depends on your model...if you can resconstruct it with pure Nurbs then you solved the problem if not see if you can convert it to multiple nurbs surfaces and start paneling

[@ParametricHouse]

Great 👍for the 3dprinting send it to our email [e-mail]

[@ahmadkhaled28]

Can u share with me too, wanna see the 3d print

[@vicky962012]

I can’t find in your website the “paneling tools plugin in” :(

[@Gothixprincess]

www.food4rhino.com/app/panelingtools-rhino-and-grasshopper

[@vicky962012]

@@Gothixprincess thank you!!

[@donghochoi8329]

Awesome!!

[@nazariodearaujo4780]

Hello, How to add patterns from library??

[@mariameshkati]

this is really helpful

[@ParametricHouse]

great :)

[@junhahwang3925]

Thannk youuu this is amazing!

[@Elle-xf8mw]

i have a box, fillet edges, when i wanna apply the grid it just get the top surface and gives me a flat grid! does anyone know why?!

[@Thrasher9294]

Any particular reason why the "Wave" option doesn't appear when creating the panels from the grid? I only have Box, Diamond, Triangle, and Hex.

[@SanathSamuel]

the updated the version

[@Thrasher9294]

Sam and removed that feature? Damn

[@EngEnte-wc8ub]

I cant found panelling tool in 6rhanio how can I get it

[@ParametricHouse]

You can download the latest version here: www.food4rhino.com/app/panelingtools-rhino-and-grasshopper

[@jamalmaquette7719]

Thank you

[@ParametricHouse]

You're welcome

[@johnashok8028]

Any one know how to size the one panel in the grid and set it through out?

[@erikzakharyan4313]

Its very much looks like FlowAlongSurface tool in Rhino

[@a.n.6084]

NIce tutorial. Thank you

[@ParametricHouse]

🙏

[@himanshuadnani7440]

i am not able to open paneling tool plugin link

[@ParametricHouse]

The link's been updated... You can also download the latest version here: www.food4rhino.com/app/panelingtools-rhino-and-grasshopper

[@edwest4402]

hey!! Has anyone out there followed this tut using mac vs5? I can't find how to create the grid onto a surface! looking through the tools using the pt command comes up blank..

[@sirankleknocker3122]

Awseome vid.

[@arsitekamatir9463]

good vidio...👍👍

[@ParametricHouse]

🙏

[@jeremydemarco8697]

Hi, I'm unable to install it on Rhino 7 ;(

[@savuthhorn3357]

the best

[@melihergene5406]

is it possible to get additional patterns?

[@ParametricHouse]

You can add the patterns to the library (end of the tutorial)

[@amizatulshayidah7055]

NICE TUTORIALL

[@ParametricHouse]

🙏

[@milotanga]

Is it possible to download Paneling tools for Mac?

[@Musicvibe881]

www.food4rhino.com/app/panelingtools-rhino-and-grasshopper#downloads_list

[@alexhu5696]

Thank you!

[@ParametricHouse]

👋

[@parsa.pm77]

This was so good tnx

[@ParametricHouse]

Thank u :)

[@shalsapielcarloss.6457]

Many Thanks very much... 1mac

[@ParametricHouse]

You're welcome!

[@rozategougianni]

thank you!!!!!!!!!! amazing video :D

[@ParametricHouse]

You're welcome

[@surf2553]

How would you do this with multiple surfaces?

[@ParametricHouse]

You can use twisted box sub category from Pufferfish plugin

[@surf2553]

Rhino Grasshopper if you wanted to put the pattern on multiple surfaces stitches together, this plugin would pattern uniformly across all stiched surfaces?? Thanks!!

[@ParametricHouse]

@@surf2553 No I thought you mean morph on multiple surfaces... but i guess you have a brep (polysurface) and you want to put the pattern on it. So in this case you don't have any however there is always a clever idea to change your brep to a single surface

[@surf2553]

@@ParametricHouse Yeah, i have been looking at how to do that. I havent found a good way yet. Because the type of work I do involves many patches (polysurf whatever), so it is always complex breps that I am looking to get uniform patterns on.

[@gary_creations]

Hi Tried to register on your site but get message "Verification code is incorrect". What do I do to register? The verification code is entered correctly

[@ParametricHouse]

Hi please check out the register link again

[@lameessadig8273]

can i make the shape here and export it to 3ds max??

[@ParametricHouse]

Yes simply export it as obj or stl

[@mohammeddokmak4542]

Hi is there is any solution to install paneling tools for free? I need help please Thanks very much

[@farukbozkurt7730]

There is a link in the description where you can get it for free. Download the file, extract it, drag and drop in Rhino, follow the upcoming instructions, finish the installation, restart Rhino and there you go.

[@mohammeddokmak4542]

@@farukbozkurt7730 thanks a lot I appreciate your help☺

[@sachingbari]

@@farukbozkurt7730 can you help me or show that video if i can do easily ...mr.Muster

[@jungchang-woo3487]

thank you man

[@ParametricHouse]

😊👋

[@depseafav9688]

Thank U!!

[@h3dlearningcambodia115]

Nice bro! !

[@ParametricHouse]

👋

[@caglargul7117]

Hey, I coulndt find the plugin can someone please help me ?

[@caglargul7117]

I got it! ty for the video awesome informations ^^

[@ParametricHouse]

Try this link www.food4rhino.com/app/panelingtools-rhino-and-grasshopper

[@sakthissd4471]

Where paneling tool is available??

[@ParametricHouse]

You have to download it from food4rhino.com

[@Pedozzi]

thanks a lot

[@ParametricHouse]

You're welcome :)

[@도토리-o4y]

how to download grasshopper lunchbox, paneling tools?

[@Musicvibe881]

www.food4rhino.com/app/panelingtools-rhino-and-grasshopper#downloads_list

[@kingtong9789]

So great video but if you slow down your speaking is more better. Some times is not easy to catch up what you said .I think you can separate it 4 parts will be more easy to understand

[@Oldest1980]

You can put Video Speed to 0.5 if its too fast for you but the speaker will now sound kind of drunk

[@kingtong9789]

thanks for your attention.It's quite hard for me because it'snot my mother language. but i will try your suggestion

[@ParametricHouse]

I will try 😁

[@BPM28]

Thanx!~

[@ParametricHouse]

🙏

[@smartwork9295]

wow

[@kenjayreyes6142]

can't install the Paneling Tools :(

[@Musicvibe881]

www.food4rhino.com/app/panelingtools-rhino-and-grasshopper#downloads_list

[@TharaMesseroux1]

My panelling tools button does not exist!

[@ParametricHouse]

You have to manually install paneling tools!

[@IvanCapitani]

subscribed

[@ParametricHouse]

👋

[@archzay5073]

🤘🏼

[@ParametricHouse]

👋

[@i_am_a_real_cat1443]

put speed up to 2x, thank me later

[@ParametricHouse]

😆😉

[@i_am_a_real_cat1443]

@@ParametricHouse no man, i'm just joking. I just discovered this channel and this video. THank you alot. People like you make this planet better!!! THANKS

[@ParametricHouse]

Thanks Marsellus👋

[@cristianarauz6492]

LIKEEEEEEEEEEEEEE THX BRO!

[@ParametricHouse]

🖐

[@hugoacherrera5998]

This plugin dont work anymore.

[@constantinosschinas4503]

*panelling tools for rhino is a waste of time.* better spend 10 minutes and use same tools or lunchbox etc. with full interactivity in grasshopper.

[@sachingbari]

Where it exactly ....mr.schinas