Parking Brake Failed BMW x5 x6

[@WorthyCorington]

This is a very professional and thorough repair. Keep up the good work!

[@basicmechanics4524]

Bravo! Cel mai bun electronist auto din Romania!!

[@oldgtstrokers]

Actually, in my opinion, one of your best videos, Ovi! It shows how deep understanding of matters can turn a unit that most people would regard as hopelessly broken, can be be turned into a fully useable unit that will last for a long time:) The trick with using car wax to avoid dust buildup is so simple, yet so clever:) Your workstation, equipment and store of parts is also highly impressive! Regards and respect from Tore, Norway. (Would have been interesting to see the rest of the job with change and adjustment of the Bowden cables, though):)

[@MOvidiu]

Glad you enjoyed and thanks for appreciation, I only did the repairing of tis module, the installation was made by the shop that have bring it to me

[@bobbadley8347]

Hello M.Ovidiu, You are the only one (of all the bund of available videos around) how mentioned in your video, in a small site sequence, to take care about the CABLES how shorten over the time an inside the module is not enough space to cover this extension. Top, that was it!!! Before ordering an new torque sensor I’ve ordered new cables for 35€ and …..it works again. ;-) But the handbrake didn’t work before error memory reset. In the moment the reset was done we could hear the motor running. Many thanks for your video, I like your videos. Very well done with deep knowledge back ground.

[@MOvidiu]

Hello Bob ! glad to hear that and thank you for the feadback

[@andrzejtajchman2372]

insane material. more please

[@virtual3d993]

Knowledgeable and patiently skilful. The mind-set to save money and save the planet.

[@mariuse3975]

Salutare ovidiu,la câte tutoriale m-am uitat atat de explicit ca la tine nu am văzut!! Bravo!!! La mine parcarea electronica funcționează dar când e mașina pornita și trag frâna electronica apoi se mai aud zgomote la modul stand mașina pe loc,dar funcționează….e un e70 ,sunt mecanic de profesie și ma gândeam să-l cumpăr nou dar e undeva la 700€ aici in Germania ,crezi ca ai avea o minima idee ce ar fi! Salutari și încă o data felicitări pt ceea ce faci !!!

[@MOvidiu]

Salut! cand motorul e pornit! frana de parcare e aplicata prin sistemul ABS lafel si Auto Hold , doar cand se opreste motorul modulul de sub masina va prelua frana de parcare , faptul ca se aude cand e motorul pornit si el totusi funcioneaza poti incerca sa ii faci o recalibrare ( ti tras sau apasat butonul 10 secunde sau ceva ge genul ...cauta pe Google) daca face lafel dupa recalibrare , va trebui diagnosticat....daca nu se gaseste nimic va trebui inlocuit si codat!

[@mariuse3975]

@@MOvidiu mulțumesc frumos

[@mariuse3975]

@@MOvidiu încă o data Salutare am Încercat sa resetez frâna electronica 10-12 sec ținuta in sus cu motorul pornit și nu se mai aude nici un zgomot când o activez având motorul pornit,mulțumesc pt. INFO!!!! Sănătate

[@stevetech5150]

great work. well executed craftsmanship.

[@MOvidiu]

Thank you very much!

[@piotrm_____y9457]

W końcu dowiedziałem co się psuje w tych modułach a już wymieniłem ich wiele :) dobra robota :) :)

[@leberkashunter9734]

You really have knack, great job, very nicely done!

[@MOvidiu]

Nice! Thanks.

[@MANJU1ANANTH]

You have amazing patience.

[@albertonunez851]

Outstanding work!

[@karloslosada7501]

MUCHAS GRACIAS EL PROCEDIMIENTO ESTUVO MUY ESPECIFICO. SALUDOS

[@npodrimaj]

Hello, Thanks for the very good video and perfect explanation. Do you know if the same applies on the X5 F15 parking actuator? I figured out that the relay is a different one: ACT212 12V, comparing to the one you used in this video. Thanks again.

[@MOvidiu]

It is different, and on that type, the relay is really failing .

[@npodrimaj]

Thank you for the fast answer.

[@SM-wy7wt]

On today, i have 3x e70 with park break defect on my work shop. Thansk for show us qhere can be problem 👍✌Cheers from Poland

[@MOvidiu]

Nice! Don't forget after repair brand new bowden cables and new parking brake shoes not negotiable!!

[@mikechappell-rm7cb]

What a great video probably one of the best of ever seen great stuff thankyou

[@MOvidiu]

Wow, thanks!

[@turki600]

I like your videos, it's very helpful and i excited for your new videos.

[@MOvidiu]

Happy to hear that!

[@RónánÓMaitiú]

this video is great, thank you so much .....is there any way to test the board or to test the relay ? the reason i ask is that my one of my cables broke, but after fixing that cable the parking brake could not reset .....

[@MOvidiu]

Hello! The only way to test it is with ista on the vehicle! You can build a bench test, but it is complicated

[@phr3ui559]

@@MOvidiui have ista, where do i go to test it?

[@danneale2790]

How much for you to repair one ?

[@barcorestudio]

thank you!

[@MOvidiu]

Welcome!

[@BionicSammich]

Should you not have clicked the force sensor into the thing on the end of the shaft next to the motor that one of the cables screws into? Or is this done when attaching new cables?

[@markflahaut3676]

What is the yellow grease used on the plastic gears please? I see mention of white grease below but i believe this is used for the sensor to slide against faces in its channel. Thank you

[@brucepeninsula2036]

You are tha man!!

[@zekidedecan600]

OMRON G8ND-2UK 12VDC

[@nedhirdouiri]

Do we need to change the brake bads to prevent the failure?!

[@MOvidiu]

Brake shoes, and ideally cables!

[@Auris_Tv]

nice and easy that's almost as easy as learning about universe

[@CalinGabriel100]

Genius !!

[@alinwv]

Ovidiu te rog frumos spunemi si mie caracteristicile releului de pe placuta. Multumesc

[@TheTec12]

well done man. great video

[@MOvidiu]

Appreciate it!

[@brucepeninsula2036]

Very nice!!

[@eddiemccabe2549]

What causes the cable to lock up like that if the cables are in good condition?

[@ericlawnotlowitz9789]

Hi sir I need your help please if I can ask what spray did you use at first

[@petervoros8221]

Hi, do you know the components next to the relay on the right side as my ones corroded . Thanks 👍

[@MOvidiu]

Hello, I'll recommend you to search fo another module. And replace the circuit board with one not affected by water .

[@jojoGeo]

Salut, unde te pot gasi? Am problema cu acest modul.

[@hutesfutes]

Hi! I also need to replace this part, but I was only able to get G8ND-2 (resistance 225). You used G8ND-2S (resistance 180) instead of the original G8ND-2UK (resistance 130). Do you think the G8ND-2 is suitable instead of the original one? Thanks!

[@christiansaiki5951]

Hello friend, I have this dtc 006031 (emergency release detected). would you have any solution?

[@persistencewins]

Hey Ovidiu, another great and clear video. By the way, would you please let me know where you got the ISTA/INPA software and which tablet/PC are you using it? thank you so much and take it ez.

[@MOvidiu]

Hey ! I use a HP 2760P a HP x2g4 and a lenovo x201T , the diagnosis software and the updates are installed by a friend who deals with such a thing.

[@persistencewins]

@@MOvidiu thank u so much.

[@МихаилГолубев-ю9я]

Thanks for the video!..What kind of lubricant do you use inside?

[@MOvidiu]

Hello ! when you buy the OEM cable they will be delivered with a bag with the special grease

[@МихаилГолубев-ю9я]

@@MOvidiu Probably the lubricant is a super secret development)

[@marcoenna5963]

Hi! Liked your video. Where do you recommend to buy this parts? Motor, cables? Thnx!

[@MOvidiu]

Hello, read the video description

[@alinwv]

Salut Ovidiu, mulțumesc pentru acest video, foarte tare felicitari. Am cateva intrebari daca poti sa imi raspunzi. Eu am desfacut motorasul si l-am probat cu o baterie de 12 v 3Ah , am observat ca iesea fum din motor, posibil sa il fi ars eu sau era buba lui? Altceva, ce vaselina sa folosesc la interior? E bună cea in spray pentru angrenaje? Mulțumesc anticipat.

[@MOvidiu]

Salut, daca a iesit fum din motoras nu e bine , ca vaselina vei putea folosi o vaselina nelipicioasa .

[@alinwv]

@@MOvidiu multumesc Ovidiu am schimbat motorasul cu unul nou am montat tot exact cum ai facut tu in video acum astept sa îmi ajunga cablurile si o montez. Daca o montez fara cabluri pot sa o incerc daca da semne cand apas pe butonul de parcare? Nu am avut cum sa verific condensatorul ala albastru, oricum nu parea umflat sau impuscat. Multumesc inca odată 🤝

[@alinwv]

@@MOvidiu Lasami un contact de al tau, vreau sa trec putin pe la tine .

[@madridband]

Salut Ovidiu super video. As avea o ontrebare dupa inlocuirea sctuatorului trebuie inregistrata, calibrata cu ISTA?? Mersi mult.

[@MOvidiu]

Salut . daca modulul e nou va trebui codat , daca e cel original si reparat poate sa functioneze din prima sau daca e bagat in avarie mai intai va trebui resetat/ scos din programul de avarie cu istaD si dupaia va functiona !

[@burnjack291]

@@MOvidiu Dar daca pui altul conditie uzat (used, good) dar bun tot trebuie codat? or numa acele noi trebuie codate? mersi

[@cosbyikaev2584]

👍

[@AMGmachine]

Many thanks for the detailed explanation. So the cause of this common error is a combination of age, high mileage and poor maintenance. Can it be prevented or will this eventually happen to every model?

[@MOvidiu]

Not quite, you can change the cables if it is still working but better rebuild it when changing the cables

[@kornelijusbalciunas9728]

Connect sensor to the screw which is turned by motor or it wont see a senso ant brake it

[@Bmw4Life88]

Salutare Ovidiu, am și eu o întrebare in legătura cu acest modul de epb la un e70, când mașina e pornita dar sta pe loc cu epb activ in acest timp se aude un zgomot ca și cum s-ar activa/dezactiva frâna electronica,dar frâna e trasa(activata) crezi ca ai avea idee ce ar putea fi?

[@MOvidiu]

Salut , va trebui sa faci o diagnosticare mai intai sa vezi daca totul e in regula ,dupa care sa faci o reinitializare !

[@luisceja8121]

Nice job are you Houston TX so can bring you my X5 😂

[@zekidedecan600]

süper

[@fitk700]

We need the f01 f02

[@joseteixeira-pj8if]

Bom dia. Sou de Portugal e precisa da reparação do módulo do travão elétrico BMW X5. Qual o país do Sr? Tenho algum contato via email? Cumprimentos José Teixeira

[@KH-xb6pd]

That’s a perfect job done by the book!! But a question remains: how to tighten the cable that is threaded without reopening the unit? Do you need to plug it and then let the motor turning until it grips the thread? 🤔

[@MOvidiu]

The cables will be mounted from outside , you can thread it up to 50% of its length

[@KH-xb6pd]

@@MOvidiu You’re the best 👍🏻😊 Respect from California 👏🏻

[@argus3234]

De ce s-a montat motarsul vechi și nu cel nou?

[@MOvidiu]

Pentru ca cel vechi era in stare foarte buna

[@sinmoto1220]

Renault scenic is similar in 2003....700 euros in renault...

[@lalispeedsparse4350]

Where is this guy!!! Wish we have this in USA... here is all about throw away and buy whole new parts...

[@BigBen0]

Ai profil de Instagram ? As vrea sa vb cu tine ceva

[@MOvidiu]

In descriere !

[@gabrielbognar7195]

Salut ! Cum pot lua legatura cu tine ?