PARKSIDE 20V DIY BATTERY HOLDER from work waste

[@MacStrange]

PDF in description

[@timiditta70]

non lo apre bisogna fare domanda?

[@MacStrange]

@@timiditta70 ho modificato, dovrebbe aprirsi ora. Mi dai un feedback?

[@timiditta70]

@@MacStrange si ma ce solo un foglio con 3 rettangoli senza misure comunque prendo idea dal video

[@FrankCreatorFC]

Ottima idea e con un po' di ingegno nulla e' impossibile !! Ottimo lavoro caro amico 👍

[@MacStrange]

Grazie di cuore amico mio

[@Balamut36.]

Привет Лео! Отличная работа, агрегат получился впечатляющий!👍👍🤝🤝

[@MacStrange]

Grazie di cuore amico mio, arriverà il video del test

[@EmiAgriDiY]

Grande idea 👍👍👍💯💯💯💯 Dovrebbero obbligigare a costituire Degli attacchi universali per le batterie costruite dalle varie case costruttrici.... Com'è successo ai telefonini

[@MacStrange]

Concordo l'ambiente sarebbe più sano e sicuro. Una sola batteria per tutti gli attrezzi di ogni marca. Un caro saluto

[@lastactionmaker]

Fighissimo!!!👏👏 Ps il download del pdf funziona 👍

[@MacStrange]

Grazie del feedback Andrea, un caro saluto amico mio

[@tihomirnovak9214]

Hello...one question, can you make a charger that will charge, say, six batteries at once?

[@tihomirnovak9214]

I would like to get or make such a charger and integrate it into the Parkside toolbox so that it is portable with six batteries ready for use...

[@MacStrange]

Hi, yes it is possible to build it and I would also know how to do it, but I don't think it is a convenient choice. It is always preferable to use certified chargers, there is no messing around with lithium batteries. Furthermore, I already have well over six magazines, one of which is in pairs. The cost of the magazines does not exceed that of a DIY production, it is not very convenient even economically. I am sorry. At the moment I'm focused on another big project that I'm carrying out together with other content. With two small children it is difficult to do more. Best regards

[@simofaidate]

Geniale!

[@MacStrange]

Grazie di cuore amico mio

[@127rally]

Ho capito il (bel) lavoro che hai fatto ma, non la funzione, cosa alimenti con quella batteria?

[@MacStrange]

Ciao rally, farò un separato video sul cannello (per brasatura con rame su acciaio) batteria, credo tra un paio di settimane

[@EmiAgriDiY]

​@@MacStrangeGrande 👍👍💯👍👍

[@lezbriddon]

BEWARE of using parkside batteries on other tools, all 20v parkside tools have a bms and cell balancing, BUT it does not test or prevent over discharge, if you over discharge a parkside battery, the protection chip in the battery will lock out the battery forever! it will not send 'handshake' to charger. its a safety feature of the bms IC to protect us from fire, not to increase company profit.. also recharging cells will not unlock it, I have tried many parkside boards etc

[@MacStrange]

Hi, I used this adapter for my mini compressor (which you can find here on the channel) together with a sub-threshold board with protection against overvoltage, overload and short circuit. Thank you for sharing this information, best regards