Parkside PMB 1100 Metal Band Saw + Milwaukee Bi-Metal blades Unboxing and Test PART 3

#Parkside
#BandSaw
#ForWorkAndFun
Info Facebook
/ forworkandfun
Support the Channel! PAY PAL DONATE
www.paypal.com/donate/?cmd=_s...
parkside.6f.sk/2019/10/24/paso...
Parkside PMB 1100 Metal Band Saw
stacionárne alebo ručné použitie
nastaviteľná rýchlosť pásu
zabudované LED pracovné svetlo
na rezanie kovových rúrok a profilov
prídavné držadlo nastaviteľné do viac polôh
plynulo výkyvný pílový oblúk s uhlovou stupnicou
jednoduché upevnenie k pracovnému stolu
1100 Watt
uhol šikmého rezu: 0 - 45°
otáčky: 0 - 290/min.
rýchlosť pílového pásu: 0 - 2,4 m/s
dĺžka sieťového kábla: cca 4 m
rozmery: cca 52 x 28 x 18 cm
pás: 1140×12.7×0.65
Milwaukee Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Includes three blades
Features:
12/14 TPI, bi-metal construction (3-Pack)
Matrix II high speed steel teeth with 8% cobalt
For cutting stock up to 5/32 in. thick
For use with portable band saws using 44-7/8 in. x 1/2 in. x 0.020 in. blades
Includes:
(3) 12/14T Band Saw Blades - 48-39-0661

[@JayAspetos]

When you cut angles like this you should put the part with the angle pointing upwards..the blade cuts more easier..

[@cristinamina3767]

I must be doing something wrong. I did same way and my blade is keeps sliding off when it’s spinning. Yes it’s locked and tightened but no idea why it’s starts sliding off from between small wheels?? It’s original blade so the no size issue..

[@2limbo]

I have the same issues. I ordered these Milwaukee blades too. I can't recommend them because these blades slip (and yes tightened well) and when running the blade moves up and down. The original blade works fine, just cut an 11 mm thick plate (10 cm wide) and did this fine at 90,1 degrees which is nit bad for this budget machine. I asked Lidl shop where I could order original blades. So far no reply.

[@irmaztamal21]

Do you provide website in English ?

[@gotzolones]

I bought about 1140 × 12.7 × 0.56 Milwaukee Bi-Metal for that Parkside saw and danced the saw blade. Cut less straight I think the reason is because it is 0.56 thinner

[@FORWORKANDFUN]

Even with me is 0.56 and feel that the weld joint is inaccurate

[@rockjano]

Hi. Is it better than the original??? I just bought this machine... I would also need some replacement cutting blades... Where did you get it from???

[@FORWORKANDFUN]

hello try order here www.cpomilwaukee.com/milwaukee-48-39-0561-44-7-8-in--14-18tpi-band-saw-blade--3-pack-/miln48-39-0561,default,pd.html?group=miln48-39-0551

[@SKYWALKER566]

what's the price of this Metal Band Saw?

[@FORWORKANDFUN]

100 euro

[@wykecastlewelding]

89 pounds in lidle yesterday March 2021

[@tomtomtom3656]

Nový pilový list sa zadrháva, keďže nebol: ad 1. zabehnutý na mäkšom materiály ad.2 kvapka oleja pre hladší chod a menšie trenie.

[@FORWORKANDFUN]

Ano jemne olejovanie nie je na skodu. S tym, suhlsim

[@imrichcsiba-csibasteel4890]

Tam nebude problém či bol zabehnutý, tam sú poškodené zuby, to niekedy voľným okom ani nieje vidno. Na pílové pásy je najlepší Imtechnik Hlohovec.

[@bricoricardo9132]

Why change the blade ? Seems not really better ?

[@FORWORKANDFUN]

Only to prevent people from buying a machine. Here you can see the blades are standard

[@carlalm6100]

@@FORWORKANDFUN So you do not recommend people buying this band saw?

[@shooter100300a]

Seams like for like blades can't be got, tried the Milwaukee and not the same, blade slips and drifting off angle.... Pity as it's a decent bit of kit for the money

[@ivannekic1722]

Are wheels made of plastic?

[@FORWORKANDFUN]

Yes

[@ivannekic1722]

Well thats bad

[@eniregnat]

@@ivannekic1722 They are metal (alu)

[@seaco33]

Personally I think the blade is travelling to fast, your blades won't last that way. I enjoyed the video though.

[@FORWORKANDFUN]

Here is the saw after 1 year of use. kzbin.info/www/bejne/b5qZaaFve917jdk

[@Lombardini490]

Original blade is not sliping

[@darkocorn1666]

as the saw blade can be leveled ravio and put in the cosp saw for angular sawing saw blade saw blade

[@trevortrent319]

i guess I'm pretty randomly asking but do anybody know of a good place to watch newly released tv shows online ?

[@zayndominick3842]

@Trevor Trent Flixportal

[@trevortrent319]

@Zayn Dominick Thanks, signed up and it seems like a nice service :D Appreciate it !!

[@zayndominick3842]

@Trevor Trent Glad I could help =)