PARKSIDE Wall Chaser / PMNF 1500 A1

Рет қаралды 73,785

i.g.

Күн бұрын

Пікірлер: 27

@chettiarsirusraj9501 11 ай бұрын

If you are lucky you only had the carbon brushes pair get burnt and can use the wall chaser after replacing them, worst case you have a blown motor. Tip for the Wall chaser of any kind you may try to use:- Your dust collector isn't strong enough to keep up with the wall chaser there is way too much dust for your dust collector to collect, so do your Wall chaser slot-cutting in two passes about half of your final intended depth for all the cuts you want on the walls. Then take a second final pass with the full depth that you want on all of your walls, this way you can get through your work faster without overwhelming your wall chasers motor your Dust Collectors dust collection. Taking two passes will also allow you to see where the Wall chaser slots will look like from one point to another and make any changes if you find necessary. The dust from the Wall chaser cutting might have gotten sucked into the motor causing it to burn up completely and blow itself up in flames. You can check both the brushes from the screwed black access covers on both sides of the wall chaser. Well if the wall chasher is a lost cause then hope you have your warranty on the product still claimable after your power cord cutting.

@raimondtracar8703 Жыл бұрын

Why did you cut the cord? You have a 3yr warranty on it.

@frankkante7850 Жыл бұрын

Habe sie 1 Tag genutzt. Habe sie sehr vorsichtig und zärtich behandelt. Sie hat 4x2m Schlitze in Rot Klinker gut geschlitzt. Eher was für den Privatgebrauch. würde sie wieder kaufenä.

@misterjoe974 6 ай бұрын

In the last part of video seems you push the wall chaser instead to pull like they say in the instruction. Maybe thats becauee broke?

@danielm.4359 9 ай бұрын

Why tf does it spins the other way? How can you work with that?

@semuda Жыл бұрын

same problem here after one wall chased :(

@DineshkumarDineshkumar-hk9ur 5 ай бұрын

इसका प्राइसक्या है

@zippis8984 Жыл бұрын

Ja meine hat sich auch mit weißen Funken verabschiedet 💥

@korbinianfischer1945 9 ай бұрын

Same Problem. Parkside send me new one. But i would not recommend this Wal Chaser.

@javiyanko4032 4 ай бұрын

Yo terminé mi trabajo con la radial más rápido y con mucho más polvito 😂😂😂😂

@Crysteps Жыл бұрын

most likely ball bearing fault. still unfortunate that it didn't last even for one full job.

@SuperMausje 7 ай бұрын

Parking side 😅

@javiyanko4032 Жыл бұрын

Eso lo hago más rápido con la radial

@pravinbutani4729 17 күн бұрын

Fon number appo

@fatmiremrulahi8955 6 ай бұрын

Sen yanlis kullandin kesmekleri ters yaptin onu zorladin

@frankkante7850 Жыл бұрын

nice

@geomal7285 Жыл бұрын

😂😂

@elleon5067 Жыл бұрын

Good

@elleon5067 Жыл бұрын

Parkside 😂😂😂

@Bolts2021 Ай бұрын

Electric tools from Parkside? They look good and feel good new but they are mostly inferior quality.I would not waste money on them! The quality is quite poor no doubt they are cheap to buy but won’t last long.I had in past years bought few electric tools as I thought they are good value for money but later found they never last long and in fact there was one already faulty new out of the box! So guys invest your hard earned cash on better quality tools which will give you a long trouble free service!