Part(1)2AZ-FE 2.4L Short Block Rebuild Of Toyota Camry 2004-2010

[@davelengerjr.4123]

Job well done my friend, very meticulous and clean PERFECT. It was well presented and you did a great job and pointing out the things to look for as the assembly goes together.

[@MayoCarsDR]

Thanks for coments sir

[@angralitux]

@@MayoCarsDR hey man, I want to get this done to the 2AZ of my highlander, I know there's a updated piston kit to fix the oil comsumption problem of this engine, as the Car care nut said, but I cant find this updated kit, are you using one of those? can you put out the part number? or in this case, the list of parts I have to get for this? thanks!

[@craigwilliams9623]

Good job

[@harrybean2129]

This is one of the first time I've seen someone who did it 👍 right and he didn't have to say a word . GREAT JOB

[@MayoCarsDR]

Thanks for comment

[@aungwin1013]

Nice job.... Keeping thing clean is every important when rebuilding engine or tran or anything .. along with all the OEM part with correct torque specifications. Love your work.

[@MayoCarsDR]

Thanks for comment

[@kennethpanimo9429]

My car engine block damage, I'm trying to buy empty engine block to replace please I need advice if ok to to that

[@MayoCarsDR]

Yes

[@xESPplayer500x]

Is it ok to use lucas assembly lube or is 5w-30 better? I thought new assemblies need certain metals added in assembly lube?

[@MayoCarsDR]

Both are fine, after that the engine has to run only with oil

[@sofyanlatrab2603]

I enjoyed every second watching , you're doing a great job , can we see how u do the camshaft position

[@MayoCarsDR]

Thanks for comment kzbin.info/www/bejne/bnjSgneQr9masNU

[@craigwilliams9623]

Thank u

[@chikaijita1597]

You make it seem so easy bro❣

[@MayoCarsDR]

Thanks for comment

[@craigwilliams9623]

Thanks

[@vicentevgarza]

You make it look very simple, great video. Question: I don’t see the Cylinder Block Spacer/Water Jacket. The reason I ask is because I was told by my mechanic as my car has been heating up in occasion that we need to remove and get rid of the water jacket/Spacer for good. That it’s not of important, can you shed some info on this. I have an 2002 Camry 4cyl. Thanks

[@MayoCarsDR]

Yes,It doesn't have to be, it's okay if the jacket is there, and if it's not, it's not a problem.

[@kramnull8962]

If you take it out it will only take longer for your engine to start to heat the coolant and in turn the air in your car. ie defrost That spacer simply displaces the amount of water allowed inside the water jacket. Like putting a quart jug of water in the back of your toilet at home. Essentially it saves you a quart of water that is used in each flush.

[@craigwilliams9623]

Blessings

[@oneday9283]

You are the best man thank you very much

[@MayoCarsDR]

Thanks for comment

[@oneday9283]

@@MayoCarsDR I want engine info 5sfe Camry

[@kevintran4273]

Did you oversize pistons and bearings due to machining?

[@MayoCarsDR]

0.50mm size

[@kevintran4273]

@@MayoCarsDR did you measure old bearing surface before buying new? Keen to know why you chose oversize and not standard size.

[@AnNguyen-qo4zt]

Are those Toyota new pistons install? If so, what the Toyota part#?

[@craigwilliams9623]

Good job

[@xandecampos2557]

Well done

[@MayoCarsDR]

Thanks for comment

[@dekonfrost7]

Nice job

[@sivucit]

hi, i have 2arfe engine, is it possible to change piston and rings in the car without taking engine out .. i do know how to change head gasket , so i am thinking if i want to change piston and rings i can still do it with engine in thee car. pls advise.

[@MayoCarsDR]

The engine must be pulled out without which you cannot replace the crankshaft bearings

[@sivucit]

@@MayoCarsDR hi, i am talking about rod bearing and piston rings not main or thurst beaering, do u stillneed to pullengine

[@deven6518]

Reused the connecting rod bolts?

[@MayoCarsDR]

No

[@kurdmap77]

what is iron part in cranckshaft is like flywheel?

[@MayoCarsDR]

The balance shaft on this section fits with the crank shaft.

[@COVID-cm4rn]

Nice vid but too bad you didnt ahow the removal from car process. That would be helpful also

[@MayoCarsDR]

Thanks for comment kzbin.info/www/bejne/h5urgpeCe5umlZo Engine removal

[@oreally8605]

What's the purpose of this build? More hp? Nothing insane but just 30hp 50hp?

[@mohammadtkhan5879]

Excellent

[@MayoCarsDR]

Thanks for comment

[@ositoelosito3424]

Excuse me how much you charge for that kind of work....I have that same engine and need work

[@MayoCarsDR]

Where are you located

[@Omar-xw7gn]

Hey there I just did all that and my engine is working fine but is leaking from the main seal oil I replaced 2 of them already and still leaking but they motor running good no smoke any infection can help me if I change the seal what should I check before replacing I don’t want happened the same thanks

[@MayoCarsDR]

Check 4:38 A cup will appear on the lift side of the seal, check it kzbin.info/www/bejne/aGe8m399qs9knpo

[@MayoCarsDR]

And when you open the engine, before you open it, check where the oil is coming from, maybe the oil is leaking from the crankshaft bolt.

[@Omar-xw7gn]

@@MayoCarsDR thanks for replying I will open the transmission tomorrow to see where is coming from

[@jeff1810]

Nice video. What did you use to get the block so clean?

[@MayoCarsDR]

Thanks for comment,I only use fuel to clean parts

[@craigwilliams9623]

Thanks

[@YourName-vh1nu]

What kind of oil do you use

[@MayoCarsDR]

Engine oil

[@YourName-vh1nu]

So you dump 5 30 right in the oil pump and spray

[@ctsportses4758]

Great

[@stevejette2329]

How long does that take once parts are all ready ? Thanks.

[@MayoCarsDR]

Thanks for coments,2 Hours

[@MissMagicD]

@@MayoCarsDR what's the typical total time?

[@percyboyd753]

I need a 07 Camry motor dome

[@guymann4016]

What’s a motor dome?

[@windhoekboer207]

How many kilometers does this toyota engine have?

[@MayoCarsDR]

300000km to 400000km

[@anselrothstein-dowden1181]

why not just give a torque spec instead of a torque spec plus a rotation in degrees?

[@MayoCarsDR]

2az engine rebuild repair manual 📚 kzbin.info/www/bejne/mny5ZK2EYq6VpsU

[@MuhammadJaweed-wu9fw]

Hi

[@uncleb8068]

Why no ring gap measurement .no bearing clearance measurement . check by hands and visual, that is Funny 🤣😂🤣

[@MayoCarsDR]

If you feel like checking you can check but I don't need to check

[@uncleb8068]

@@MayoCarsDR So why you use torque wrench? Don't need it

[@فيزمنكلهطربوازعاج]

😘😘😘😘😘😘😘😘👌👍

[@captainsledge7554]

You used oem pistons??? Yep... ur gonna burn oil still after it runs for a few thousand miles. The updated pistons arent that great. I used enginetech pistons. The rings were same width as sbc... the updated pistons and rings that are supposed to fix the oil burn , are still too thin and they burn lol