PART 1 450HP 12 Valve Cummins

[@jamesmarlar696]

Nice and he is fortunate to get to learn about his truck . No better way to appreciate what you have than to be responsible for building it.

[@73cjproject]

So much great content all in one video. Love it. Thanks for keeping us in good content.

[@horsetorquesdiesel]

Glad you enjoy it!

[@bernhard8540]

I wish some companies would give ARP some competition... its good for the buyer if they do.. i like arp bolts and etc but they are just so crazy expensive 💙💙💙

[@bert5003]

love this type of content and format. definitely learned a thing or two i may use in my own junk.

[@jimmungai1938]

I’m getting my old 12 valve for mine first GEN Rebuild a DNJ machine in Cambridge Ohio. Those guys seem like they really know what they’re doing down there all right this is six in a row.Jim from Kenner, Dale, Pennsylvania

[@bernhard8540]

I've come to use right stuff on both sides of some gaskets just to better guarantee no leaks. I dont gob it on but i do like you do and just do a bead to guarantee the gasket sticks and seals💙💙💙 right stuff is a diesels best friend, if you dont like stains in your driveway 😂😂

[@carlosmerino5547]

Good job on it, when you set you fiull pump l love to see how you explain step by step please , God bless you all in your bissnes and your family! I thank you very much ❤😂🎉😢😮

[@_astralxinfluenced_2799]

Do all Cummins have the wear ring from the rear main, or just the 12v's?

[@Bradzuzu]

Good stuff thanks for making the video !! I'm going to be going through my donor engine very soon an will set the engine up on my stand that way looks way safer ..

[@ppvfd121]

Love to see this ol 12 valve getting some TLC

[@fernandolouismiramontes2520]

Does the 5.9 need an ecu at this power level to run or is it possible to be all mechanical injection still?

[@N.A.J.]

“Promise I can. I got two trophies.” Put that on a shirt. Great video.

[@slowaf12v]

Great Build Content Josh!!!

[@horsetorquesdiesel]

Appreciate it!

[@matthewgarcia4081]

Hey justin I’m 24 just tryna learn what I can, want to do similar upgrade’s to my 12v Cummins,never done motor work before in that depth but I’m eager to learn, would you recommend a specific service manual to read and follow as a guideline? (Any tips or advice would help)

[@horsetorquesdiesel]

Honestly dig up the old comp d and Cummins forum threads! A lot of good info

[@Scott_Buchanan]

What’s the hp/tq limit on a ve pump 12 valve?

[@chandlerlofton6536]

Does the engine stand bolt right up on the side like that? I had mine mounted from the back before I sent it to the machine shop. It was a little sketchy.

[@horsetorquesdiesel]

It uses 3 bolts and it bolts to the holes in the block that use the engine mounts

[@chandlerlofton6536]

@@horsetorquesdiesel sweet! I’m going to do it that way when the block comes back. I think I have the exact same stand you are using.

[@brianpuff9021]

I checked out Manton new roller rockers,5 gran!!!thats crazy!!!!!

[@witcher71]

Everybody is off their rocker with prices.

[@OzIfeanyi]

Good job big boss 👍💯💯

[@t3dieselperformancerepair228]

Great stuff rtv the best!!

[@horsetorquesdiesel]

It sure is!

[@Oneleggedstallion]

Ole pockets showed up

[@JRasS14]

Just did this in the truck. Not a good time Definitely loctite guys, crazy how many bolts felt loose. My kdp was still sitting tight

[@jamesebanks5543]

New valve seals ?

[@horsetorquesdiesel]

Nope these looked perfect! But definitely check them!

[@hankclingingsmith8707]

The trick is to torque each one as you replace them. The order of replacement does not matter

[@Altekameraden79]

My 380,000 mile 12v has suddenly started blowing by and hazing regardless of rpm. I don't have a shop to do the work myself inside as I am in Wyoming. So I'm starting to price long block builds. Both with and without install.

[@baconcreek609]

If your being cheap on the tappet cover, super glue it to the cover and also to the block.

[@BCnAK]

Keep it up sir!!

[@horsetorquesdiesel]

We will

[@baconcreek609]

Daguum, you got me wanting to build another engine....

[@horsetorquesdiesel]

Do it

[@baconcreek609]

26° timing rattles the old 12v pretty good.

[@bwizzy9218]

“Who am I kidding” 😂😂

[@dbfabworks5320]

Awesome!!!!!!!!

[@fabianpendl3557]

Fun fact about xotic headstuds. They’re actually Canadian made not Chinese lol

[@TheProchargedmopar]

👍💪

[@melvinwilley3087]

I’ve used the xotic studs on 6.0 power stroke’s with great results

[@3am-421]

Does he have a insta?