From crusty 4 lug rear disk to super clean 5 lug trailing arms with new calipers, rotors, bushings & more.
Пікірлер: 42
@adrianwoods87702 жыл бұрын
Love that music in the end. I'm going to refresh my setup. This will be useful. Thanks Mike!
@Stateside_aristo2 жыл бұрын
Haha thanks bro! Glad it could be of some help!
@chrisehret2 жыл бұрын
Stopped caring what I look like or sound like also. Keep up the great work!! Can’t wait to see the end results
@Stateside_aristo2 жыл бұрын
Yup that’s the best man no fxcks lol. Thank you brother much appreciated!
@jonlyons3376 Жыл бұрын
Bro this is exactly what I've been looking for bow I got my parts list and I'm gunna head to the junkyards this weekend to start my 5 lug swap on my da.
@Stateside_aristo Жыл бұрын
Wooohooo awesome man!
@polishoskar20394 ай бұрын
Hi there, I have 260mm disc brake 4x100 rear trailing arms can I do this conversion and reuse the 260mm caliper since they originally bolted on? Thanks watched the video 3 times but rather make sure than ordering parts as usual
@15kkl4 ай бұрын
What brake hoses did you use for the rear ? Were you able to use the factory brake hose bracket located on the back of the trailing arm?
@rocky_top_deluxe2 жыл бұрын
Just give all the old school tricks away Mike 🤣
@Stateside_aristo2 жыл бұрын
Hahahahahaha I’m sorry bro 😆😆😆😆
@christopherchalmers25712 жыл бұрын
Awesome bro! Thanks for the shout out!
@Stateside_aristo2 жыл бұрын
No problem bro!!! Thanks again for everything!!! You’re the man!!
@96MustangBoy14 ай бұрын
Which rear rotors?
@salsa51159 күн бұрын
What did you use for the front?
@islandrsxboostedk24122 ай бұрын
Where did I get the emergency cables
@ibnboulware46285 ай бұрын
What rotors and calipers did you use . ? From what model
@Chopped93VX6 ай бұрын
Nice videos, you got a new sub. People like you and me prove you don’t necessarily need a full snap on box or a lift to do great things
@elmilamores76866 ай бұрын
Unless i missed it, ehat trailing arms ate these?
@adrianwoods87702 жыл бұрын
Yaaas been waiting for this!!!
@mikalsese2466 Жыл бұрын
Rsx rotor disc is fit to 5 lugs in rear
@sparvar1776 Жыл бұрын
What brake pads do you use with this set up?....you might of said it and I missed it
@jdsphynx36565 ай бұрын
The rotors are from what car
@LibertyGarage2 жыл бұрын
Awesome content Mike !! Making me want to redo my set up 😅😅
@Stateside_aristo2 жыл бұрын
Hahaha thanks bro!
@measy7ify Жыл бұрын
Hey what's up? Club I'd on the check in try Chuck and Eddie's junk yard they have Madd Hondas!!!! The junk yard I mentioned is located in CT keep up the good work and good luck with the swap!
@Stateside_aristo Жыл бұрын
An ok awesome thank you!!! The car is all back together check out my IG @ek3_mike to see pics
@Whitehatch_Checo Жыл бұрын
So integra type r caliper will bolt up to a 4 lug trailing arm? I was wondering why people was using rsx calipers
@Stateside_aristo Жыл бұрын
Yes, you can use RSX calipers because they are cheaper and easier to find but the bleeder is on the wrong side and when it comes to bleeding the brakes, you will have to flip the caliper, but tiebar is the way to go if you can find them
@Stateside_aristo Жыл бұрын
TypeR*
@essentiallites75362 жыл бұрын
are the calipers that originally came off the trailing arms close to the itr? im thinking they will bolt up to the bracket and keep the bleeder screw facing up. just wondering because im trying to help my buddies son do a poor mans conversion on his db7
@Stateside_aristo2 жыл бұрын
I honestly don’t think so. In all my research the two caliper options were ITR or RSX. The rotor is an RSX rotor. I know the ITR calipers the bleeder faces up but the RSX would mount with the bleeder down. I should have tried mounting up the calipers that came with the rear disc but they were super rusty and in bad shape I just tossed them. But yea I highly doubt they work. If so I’m sure they would have stated that you can reuse the calipers from rear disc conversion
@essentiallites75362 жыл бұрын
@@Stateside_aristo I did see one post by someone that said the original calipers would work but that was awhile back yours is the most recent so I was hoping you still had them. Thanks for the info
@Stateside_aristo2 жыл бұрын
@@essentiallites7536 anytime man
@brandonazevedo44942 жыл бұрын
do you have a link to which calipers you purchased off of rock auto?
@Stateside_aristo2 жыл бұрын
I forgot to mention that. Go to rockauto.com and search for Integra calipers. They typeR will be listed under those. Make sure you select the ones with brackets!
@evolee8949 Жыл бұрын
I’m building the exact same car but with a b series engine.
@franckabril2890 Жыл бұрын
What make and model are the rotors out of?
@puch7261 Жыл бұрын
can this same setup work on ef hb??? anybody?
@andypimentel4252 жыл бұрын
“Not building a show car”…then goes to car shows and wins everything 😩😩
@Stateside_aristo2 жыл бұрын
LMFAO yea right 😆😆😆 thank you bro 🙌🏽🙏🏽
@TwistedAutoGarage Жыл бұрын
Did u use crv from bearing or integra?
@cantstandpinks715310 ай бұрын
the bearing doesn’t change… you’ll be fine using the CRV one..