Part 5 HOW TO REDUCE THE RESISTANT OF THE 8S DESIGN LIFEPO4 CYLINDRICAL BATTERY PACK

[@villartaofficial]

Watching all support

[@stubanshuberi8793]

Excellent video, much needed video for anyone building a battery pack

[@pitikaron]

Thanks

[@s3rkanAGA]

Bro maybe you should consider making a copper sandwich. I often buy one meter of 0.1mm thickness of copper foil roll and cut it in appropriate size to make it.

[@pitikaron]

Thanks bro for your advice. However a 0.1mm copper is 10A if 0.1mm×10MM! Correct me if wrong?

[@ukinfamous]

Great series of videos, I have lots of these 32700 cells which came from smaller packs with faults but the cells are all good. Looking to build a larger pack for my DIY solar but know nothing about it 😂 what is the final voltage and ah of this pack? I assume both packs together are 24? and if just one it would be 12v? I have found the BMS from your earlier video and there is an option for both. Have you more videos to come showing the addition of BMS etc? Thanks for your videos, a great help!

[@pitikaron]

Thank you for your comments. BMS SPECIFICATION: 8S/24V 100A working current. 50A Charging current max, 8S 13P 104 32700 in total. Minimum voltage for 8S 24V and max voltage 27.2V 29.2V it's just for floating voltage.

[@ukinfamous]

@@pitikaron thanks, are you making another video completing the pack with fitting the BMS?

[@pitikaron]

@ukinfamous I've completed it already. Link below for the final set up. if you have another question you can email me through this. [e-mail] kzbin.info/www/bejne/Y6bYnpuvbraYgpIsi=VRi1HPeDmWaAmutN

[@jessiesalaniocabanero9681]

Sir pwede po ba palitan ko ng 32650 battery yung 24v na battery ng ups?

[@pitikaron]

Pwede boss basta parehas mo lang Voltage sa stock battery mo kahit mataas ang AH walang problema ang importante voltage boss

[@jessiesalaniocabanero9681]

@@pitikaron maraming salamat sir, natatakot pa kasi akong palitan ng 32650 baka sumabog 😅, Pero ngayon palitan ko na ng 32650. Bagong subscriber Nyo po ako sir