Part 6: H22 Prelude Engine Swap Into a 90-93 Honda Accord: Clutch, Flywheel & Transmission Install

  Рет қаралды 4,393

Random Rebuilds

Random Rebuilds

Күн бұрын

Пікірлер
@MAXAMMO.
@MAXAMMO. 3 жыл бұрын
Can’t wait for that first start up! Very clean H22!
@randomrebuilds
@randomrebuilds 3 жыл бұрын
Same here, I'm pretty nervous about that first key turn lol
@whitelamp13
@whitelamp13 3 жыл бұрын
Lots of great pointers. Demonstration of hoist points and transfer from crane to stand to ground. Good stuff dude. I would break up the video and add time stamps for individual tasks.
@suprafahrer6453
@suprafahrer6453 3 жыл бұрын
Always great information, explanation and well executed video. Thanks
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
I really appreciate your time. I have to do everything your doing and I’ve never done it before. So good
@cxshmoney._103
@cxshmoney._103 3 жыл бұрын
So excited for next episode !
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
Cool video
@jaydinhaskins4357
@jaydinhaskins4357 8 ай бұрын
Awesome video. Just got my second accord....a CB9! Also, what is the song that begins at 17:50?
@alfonzotorrez8611
@alfonzotorrez8611 3 жыл бұрын
Will the exhaust headers fit a 01Honda prelude sh 2.2 litter h22A4
@randomrebuilds
@randomrebuilds 3 жыл бұрын
An H22 header, yes. The OEM header from an F22, no.
@Amck1224
@Amck1224 3 жыл бұрын
Get a prelude transmission. It’s not going to stay in vtec because of the long gears of the Accord. I did this swap and ended up getting a prelude transmission. I wished I had done it to begin with.
@randomrebuilds
@randomrebuilds 3 жыл бұрын
I don't think I'll be taking this to the track, but need to the longer gears for highway. I'll keep a lookout for a Prelude transmission if it turns out to be boring.
@Amck1224
@Amck1224 3 жыл бұрын
@@randomrebuilds That’s fair
@excaliburO2
@excaliburO2 2 жыл бұрын
That or get the prelude transmission shave off the 5th gear CB/CG/CD to fit the prelude transmission. Then mate with a LSD.
@joshuachurch1923
@joshuachurch1923 Жыл бұрын
Did you use the stock accord transmission?
@jcv8371
@jcv8371 5 ай бұрын
Just get hondata and switch the vtech engagement to a kower rpm and aanother good header for the h22 was the highend header
@orlandomorales6565
@orlandomorales6565 2 жыл бұрын
Will the crank pulley of a 90-93 fit a h22
@randomrebuilds
@randomrebuilds 2 жыл бұрын
yes - thats what I did.
@orlandomorales6565
@orlandomorales6565 2 жыл бұрын
@@randomrebuilds ok last question I am wanting to connect my reverse light how you wire it up can I go from the pig tail wires harness from the auto shifter and wire it straight to the reverse switch on the transmission or how will it be thanks buddy really great videos
@jordanbuck4206
@jordanbuck4206 3 жыл бұрын
I hate to say this but I think you forgot to add the timing plate (correct me if I’m wrong lol). I made that mistake when manual swapping my 93 cb9 haha. Since you’re using the f22 harmonic balancer you don’t have the exterior timing marks. It’ll make timing the distributor MUCH easier with that plate. I never put mine in and had to make my own timing marks with the cam and crank.
@justinblanton6882
@justinblanton6882 3 жыл бұрын
What trans did you end up using im saving up now to do a 5 speed swap n im new to the Honda game. I umderstand it all just need to know what trans to swap.
@randomrebuilds
@randomrebuilds 3 жыл бұрын
The only Prelude timing plate is from the mid 80s models. Do you have a picture or link?
@jordanbuck4206
@jordanbuck4206 3 жыл бұрын
Yea I got a picture of mine for an f22a1
@jordanbuck4206
@jordanbuck4206 3 жыл бұрын
I could send a pic through email or something. Also for an f22a1 I used an “H2A5” tranny. I’ve heard you can use it with an h22 but the VTEC can be finicky with it. I’ve had mine mated to a non VTEC f22a1 for over a year and have had no issues it’s very minimal wiring too if you’re keeping the engine in the cb7/cb9
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
What trans are you using?
@randomrebuilds
@randomrebuilds 3 жыл бұрын
2002 Accord
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
@@randomrebuilds p2a8?
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
I think your really going to like that. I have a t2t4 and it’s great but sucks on the freeway. I love it but I wouldn’t drive it really far. It’s perfect daily commuter
@randomrebuilds
@randomrebuilds 3 жыл бұрын
@@cbdreamer1709 Thats the only reason I chose Accord as I knew the Prelude unit would be screaming down the highway which gets annoying. Ideally if you could take the Accord 5th gear and swap into the Prelude unit, that would be perfect - but that requires some machining I've heard.
@cbdreamer1709
@cbdreamer1709 3 жыл бұрын
Yeah. I’m trying to figure that out. I want to use accord final drive with accord main shaft with h23 gears and p2a8 5th. Just have more priorities right now. Someday. I don’t need it right away
Part 8: H22 Prelude Engine Swap Into a 90-93 Honda Accord CB7 CB9
21:00
Caleb Pressley Shows TSA How It’s Done
0:28
Barstool Sports
Рет қаралды 60 МЛН
БАБУШКА ШАРИТ #shorts
0:16
Паша Осадчий
Рет қаралды 4,1 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Marmok
Рет қаралды 2,8 МЛН
Junk yard H22 and K24a4 transmission haul
31:55
Hush Performance
Рет қаралды 2,6 М.
Prelude 450HP H23 Turbo Motor Install | It's Gonna be a Beast!
11:36
Rebuilding my Honda Prelude (H22A4)
18:43
LVI Garage
Рет қаралды 38 М.
Balance shaft installation. G23vtec episode #11
19:25
sagitt net2
Рет қаралды 5 М.
Bigger Engine.
2:03:51
SimonFordman
Рет қаралды 529 М.
How to Replace a Transmission (Full DIY Guide)
28:24
ChrisFix
Рет қаралды 8 МЛН
Part 9: H22 Prelude Engine Swap Into a 90-93 Honda Accord CB7 CB9
30:00
Random Rebuilds
Рет қаралды 4,9 М.
Caleb Pressley Shows TSA How It’s Done
0:28
Barstool Sports
Рет қаралды 60 МЛН