Is this on a Yamaha V-star 1100? And is that the Neural Start Switch unit? I'm looking for a video on how to remove or bypass the Neutral Start Only System so I can either just pull in the Clutch and start it, or if I need to push start it I can... Otherwise I could get run over or cause an accident if it stalls at a Red light at a Major intersection!! My brother had a 2007 V-star like the one I'm looking to buy and he had that happen to him and the sun was out and he couldn't see the Neutral light and the traffic lights changed to Green and he couldn't get it in Neutral!! He got rid of the bike! I heard that it can be bypassed, so I am interested in getting the bike because he said it was a great riding bike and very smooth on the back... I will just need to fix the 4 or 5 problems with that model and then it should be a Great bike... So Please let me know if this is that part and if not can you Please send me a link to the video of the removal or bypass of the Neutral Only Start Switch?? Thanks
@JensEskildsen6 жыл бұрын
Awesome, very simple and helpful. You got yourself a new subscriber =)
@marcusblue85523 жыл бұрын
would this keep it from starting? I lost the little spring for it when I rebuilt my 08 yz250f and im just wondering if it would keep the bike from starting...
@DM56fmxАй бұрын
What did you do with the wiring that was still on the bike?
@michaellouie50462 жыл бұрын
Thanks for the advice. Got to try this.
@branislavvatral5666 Жыл бұрын
Hi i know i am little Late but do you need to unplug the cable or just roll IT a tape it on motocycle
@warrenae17314 жыл бұрын
hey johnny what does eliminating the neutral switch do??? p.s great videos very helpful.
@johnsn104 ай бұрын
Mine leaks oil from behind it. Is oil supposed to be behind it?
@charliek24622 жыл бұрын
Would this work with all types of motobikes or just crossers?
@teenierpick65215 жыл бұрын
Just rebuilded my engine and saw that some cable had go off, so i wonder what that thing is for
@kevmanh00214 жыл бұрын
Hey, great video, but I was wondering if you could make a video changing or taking off and putting back on the brake and clutch levers, I got new ones, and I'd like to make sure I do evrything correctly. Thanks
@bradl455 жыл бұрын
Splitting cases, does the switch need to come off to split cases? I don't want to strip the screws, lol. I haven't tried to apply any heat, or locate my impact screwdriver(haven't seen since the last move)
@MxRacer24014 жыл бұрын
Yeah i noticed it had a little differance but i Just cut mine off yesterday and put a e3 plug up in er so iv noticed it runs way better. Thanks
@dash1111111114 жыл бұрын
Are the 250f motors reliable like will they last a long time if you just trail ride and not race but go to the track every so often
@stanleyswiatkowski57613 жыл бұрын
What atv are you working on?
@T28twinturbo14 жыл бұрын
I am thinking about capping my neutral switch, as well. Will doing so make it more difficult to start the bike in gear??
@mattb123414 жыл бұрын
Would that cause a bike not to start if it was bad
@xA18kND1x2 ай бұрын
Is this thing why I can't start my YZF450 in gear?
@joshkirby75089 жыл бұрын
can i just cut the wires and then tape it together with tape? because the bolts are stripped from the previous owner. and I can't get into the place to take it out.
@babylonhobbiesandfpv48623 жыл бұрын
Where did you get the carbon fibre covers
@MxRacer24014 жыл бұрын
please show a video of an example of what it dose when the bike is started.
@StretchTheFloor9 жыл бұрын
Hi I have a pit bike semi outo it is. It is very hard to start it up because it is very hard to find neutral would this help?
@Johnnysshop9 жыл бұрын
RoGu3k SS_Killer93zx Hmm.. I doubt it but it wouldn't hurt to try!
@Migknight265 жыл бұрын
Will this work for a 2007 Yz450f?
@gscalejake8 жыл бұрын
when you took this stock switch off, was there engine oil behind the switch?
@Johnnysshop8 жыл бұрын
I had the bike drained but if you're concerned, just lay it on it's side.
@gscalejake8 жыл бұрын
+Johnnysshop thank you! i dont mind draining it, no big deal!
@jenrei72948 жыл бұрын
Jake Little
@tpghl52254 жыл бұрын
Jake Littlefield For future readers... lay the bike on the side as he mentioned. That's what I did and no oil came out. Used the Tokyomods block off kit on mine.
@jdeaton1713 жыл бұрын
how would it help, if you took them off... i might consider it.
@snowfort6614 жыл бұрын
i have a ttr 225 electris start and i cant start mine in gear and it doesnt have a kick start would this work for me casue on the trail at times its annoying haveing to find neutral when ur stuckl on a hill stalled out
@mxguy62914 жыл бұрын
@tybill1 i got over 80 hrs on a piston and valves. you dont need to replace them at 30 hrs
@snomy456714 жыл бұрын
i have a ttr 125 and it breaks every time i ride it should i get a yz250f or a 450
@JensEskildsen6 жыл бұрын
And now you need to use the clutch even for starting en neutral?
@Johnnysshop6 жыл бұрын
No, nothing has changed there.
@BIGSHAGGYDOGG13 жыл бұрын
hey i have the same bike and same wire what exactly does the neutral switch do? the wire is annoying me if it has no real purpose i would like to just rip it off lol Thanks
@reddsmith79074 жыл бұрын
Love the Red lol
@gadog42013 жыл бұрын
@Johnnysshop how much dose the aftermarket cap u bought cause??
@cyberjack6 жыл бұрын
did your switch have oil behind it ?
@Johnnysshop6 жыл бұрын
I don't believe so.
@manuelpereyra93197 жыл бұрын
hola, por favor para que sirve eliminar el interruptor. como afecta a las rpm y al limitador? gracias Hello, please, what is the purpose of removing the switch? How does it affect rpm and limiter? Thank you
@Johnnysshop7 жыл бұрын
Helps the bike to start easier. You can over rev the bike in neutral without it.
@manuelpereyra93197 жыл бұрын
Johnnysshop Just disconnected and ready. The mapping of ignites does not affect it?
@chadterry52497 жыл бұрын
I have searched everywhere for this part but it comes up a totally different part. Is there another name for it other than neutral switch
I doesnt matter. You're not going to hold it WOT for a very long time until you notice you're in neutral. Happens quite often on my yz125.
@BIGSHAGGYDOGG13 жыл бұрын
@Johnnysshop Ok ill try it :D when i get it running ill see the diff ill probably just end up doing what you did.
@ManiaKDaMicMurderah7 жыл бұрын
What frame guards are those
@Johnnysshop7 жыл бұрын
Lightspeed
@3dwezzy7402 жыл бұрын
what does it do
@dilleo20009 жыл бұрын
What kind of education do u have for your knowledge of engines and such
@Johnnysshop9 жыл бұрын
Just lots of reading..
@03loser496 жыл бұрын
need help. yz250f only sparks when kill switch is engaged
@Johnnysshop6 жыл бұрын
You may have the wrong type of kill switch.
@MxRacer24014 жыл бұрын
Yup
@BIGSHAGGYDOGG13 жыл бұрын
@Johnnysshop ok thanks! im just gonna cut the wire at the plug.
@PanamaSticks5 жыл бұрын
When did you ever say how and why to eliminate the neutral switch? Better starting? WHY? And what was the reason YOU removed it? The audio was unintelligible. I played it six times. Something about water?
@tpghl52254 жыл бұрын
PanamaSticks Better starting because the neutral switch robs the spark plug of a few volts. You'll notice easier cold starting as I did on my yz250f. That's the reason I removed it. He said he removed his because he had the wire hanging and accidentally stepped on it ripping the wire off the switch.
@imbranato11113 жыл бұрын
the reverse light still on and flashing while im driving forward on my yamaha raptor 660, what i can do? please let me know!!!
@Mohapi_Tau4 жыл бұрын
First time I'm hearing that there's a reverse light on a motorcycle.
@tpghl52254 жыл бұрын
Mohapi Tau raptor 660 is a quad
@BIGSHAGGYDOGG13 жыл бұрын
@Johnnysshop it worked lol yay no more hanging annoying ugly wire xD as long as i dont let some idiot on my bike that hits the rev limiter in neutral now..
@Jsmooth69able9 жыл бұрын
Do you know if i can remove the pin and spring like this on my Redcat 110cc atv? It's a 2 wire switch/plug that has 2 metal moldings on the inside of the plug. It's not allowing my to start by the electronics so i have to jump the solenoid to start. I can't find a switch to replace the broken one so i need to bypass it..please help me...
@Johnnysshop9 жыл бұрын
+Johnny Winsett Unfortunately I don't have a lot of experience with the Chinese bikes :(
@MxRacer24014 жыл бұрын
@Johnnysshop lol yep but it is a noticeable difference
@shujahgillani93076 жыл бұрын
Mate i have ninja zx7r 2002model having problem to start some time it starts but some time it doesn't i changed foot stand censer also gear selctor censer it was working fine for few weeks then started to play up again im so fed up saw your video can i bypass the gear censer ? saw your video but you didn't mention about the wiring the two wires if i could join them with out censer would bike will start ?? I dont want to short circuit ECU I dont mind NUTRAL light on all the time as long bike will start Also bike wont start with out NUTRAL LIGHT ON Please any one guide me thanks
@Johnnysshop6 жыл бұрын
Hmm.. I haven't worked on too many street bikes so I'm unsure.
@50Stunt450r14 жыл бұрын
im sorry what does a neutral switch do?
@thestreetoutlaws61206 жыл бұрын
Uzi H prevents you going to fast in reverse but if its broke, it wont let the quad go high rpm in nutral
@JoelAvery68611 жыл бұрын
on my bike I did a jump once and the shifter shifted as I landed and broke the gear box
@crazydude774911 жыл бұрын
haha
@l2_shred2734 жыл бұрын
If this is off does it stop the engine from starting?