Particle board production line/ waste wood pb producing process/ 0086-139 5619 9239

Particle board production line ( particle board machines ), If interested in particle board production line ( chipboard production line ),
www.sumtointl.com/
Website: www.w-mkm.com/particle-board-p...
Whatsapp/ WeChat: 0086-139 5619 9239
E-mail: [e-mail] .
FaceBook: mjz239
Particle board is to use footpaths timber, branch wood, bagasse, bamboo, wood processing waste, sawdust, straw,cotton stalks and other wood as raw material, Urea-formaldehyde resin adhesive imposed after mixing, through hot press repression into density at 550-800kg/cubic meters of man-made sheet. Face plate for the graded structure, smooth surface, good processing performance, widely used for furniture, construction, packaging, vehicles and ship’s interior decoration. As particle board with abundant sources of raw materials, product wide range of uses, noise effects and anti-borers, good performance advantages. Therefor the product has broad market prospects.
Our factory has successfully developed the particle board production line with an annual capacity of 10000-100000 cubic meters. Equipped with PLC control system with man-machine interface of famous foreign brand names, the production line is easy to operate, stable to run, which makes production cost greatly reduced. With small investment in fixed assets, it is the optimum choice for the manufacturers of particle board.
More machines as followings:
Short Cycle Hot Press: www.sumtointl.com/short-cycle-...
Door Skin Hot Press: www.sumtointl.com/door-skin-ho...
MDF Production Line: www.sumtointl.com/mdf-hdf-prod...
OSB Production Line: www.sumtointl.com/osb-producti...

[@romlirosadi744]

Keren i like from Indonesian

[@shangangtan6242]

nice machine, proud of China Product

[@vinitmaliya4403]

Very supar

[@MuhmmadAkhtar-ki5uo]

جناب یہ پلانٹ کدر ہے

[@top-woodmachinery]

very good

[@israr568]

Zabr10

[@petrosteklewold8485]

Nice cost

[@anthonykeswani4125]

Can we make this at home? DIY?

[@knowall5792]

No. You can make a few 2 ft by 2 ft pieces a day at laboratory. But it will not be economically viable.

[@user-qo7yj3uo3s]

Wholesale rate Pr bord Lene mujhe Kaha milenge

[@woodbasedpanelmachinery4809]

for particle board machinery, welcome to visit: www.w-mkm.com/particle-board-production-line.html

[@woodmachineengineer3705]

Particle board production line, contact for more details, WhatsApp/ WeChat: 0086-139 5619 9239 , E-mail: [e-mail] . Particleboard Production Process(Brief) 1.Wood shavings preparation Section Short and long logs of small diameter are fed into long-log flaker by the feeding conveyor, which sliced into qualified shavings at once, then the flakes will be sent to wet flake bin. As for short branches and other materials, what will be sent to feeding belt conveyor of drum chipper. Raw material are whittled to qualified chips by chipper, then wind send these to wood bin as intermediate storage. Wood chips then pass the ring flakers to be qualified wood shavings, and will be sent to the wet flake bin by wind. 2.Drying and sieving section The flakes discharged from the wet flake bin are conveyed to the rotor dryer through screw conveyor. Qualified flakes are screened in screening machine. Screw conveyor of dryer is equipped with spark detection devices,once alarms, dry materials will be discharged outside the system automatically. Qualified core flakes are stored in core flake bin; oversize flakes will resent to mill to be re-crushed, and transported to surface flake bin. 3.Glue mixing and applying section This section includes the wax emulsion and hardener solvent’s preparation and transportation, additive storage and glue mixing and spreading system. After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively. 4. Forming and hot-pressing section The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of mental remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet. 5. Cooling and sizing section The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift. 6. Sanding section The storage board are sended into sanding system(include hydraulic lifters, roller conveyors, wide belt sander). Then sanded,checked and stored. 7. PLC system The main controlling room is set in this particle board production line, through this you can realize operating all machines automatically and manually from wood shavings measured, spreading, shaping, hot press to trimming processes. Besides, set controlling console (box) in the operating scene for each section(except hot press section) to control and monitor each machine’s operation. Tips:our factory can also product the different sizes of the particle board production line according to our customers' requirements. full automatic particle board production line, particle board making machines, chip board production line, chipboard making machines

[@skvlogs5710]

Ap ka nombor Dena to