Passat B6 2009 Headlight Range / Bixenon headlights Retrofit VCDS Coding and Basic Settings

[@lhosienouamou3940]

Thank you very much

[@nesko0000]

Hi, Have you also the coding for Sharan 7N 2012 with Xenon and AFS?

[@A-hb2if]

Hi what's the coding for xenon headlights with adapter for Audi TT MK2 8J??? Please

[@endlesscustomstyling2683]

Hi. I need the coding for VW golf 7 gti.. My lights are very low.. After I lowered the car

[@A-hb2if]

Coding for xenon headlights Audi TT MK2 8J please??!?

[@squadgoals4948]

Hi, I want to do xenon headlight retrofit on vw Passat b6 but don't have AFS will I still be able to code and make it work without level sensor

[@lavianeverything]

You need level sensor and afs for full function.

[@zilvinasrinkevicius5201]

Hi i nead help

[@prinyaw]

This adjustment is done when you change the bulb on xenon projector or what? The technician changed the brighter bulb to xenon projector for my VW Scirocco. There is no warning show in the dashboard, but when I run the VCDS, it shows malfunction on the headlight range..

[@lavianeverything]

What error you get? This video is made for people retrofitting xenons . If you just change a bulb should be ok, no error. If you get errors, post it here.

[@prinyaw]

Thanks, I cleared the fault code already…

[@zilvinasrinkevicius5201]

Are this coding is four europe headlights

[@lavianeverything]

Hi, yes.

[@cosmindraghici8241]

What is the code for golf 6?

[@lavianeverything]

I don’t have golf 6 , try to get the module from golf 6 gti that usually had it and will be just basic settings needed.

[@maco3711]

What’s the coding on b7?

[@lavianeverything]

I haven’t done that,mine has C version, I’ll work on a b7 shortly and update you. Code os different if car has DCC so don’t just put a code randomly.

[@carguysyndrome]

​@@lavianeverythinghi. Have u done b7 coding? Mine is fwd and no dcc

[@lavianeverything]

@@carguysyndrome b7 has actually coding helper , not sure i made a video but i can make one if you need. Just open the module in vcds and follow the helper. You will have to do basic settings as well. Let me know how you get on.

[@colintan9613]

@@lavianeverything I wonder if the F version will have the same code? Unless I retrieve the code from my faulty AFS and copy it to the new AFS module

[@lavianeverything]

@@colintan9613 it depends if your old Afs is still ok to get the code. This was a retrofit i did in the video and usually the module is fine unless water damage or some wires shorting. Dspends on the vehicle setup if you have DCC or not. Get same part number and copy code over. The F version can be coded as well, vcds and long coding but might need more involved. Try to match part numbers and is safe that way.