Can The CHEAP SHOT Wash A 2 Story House?

[@teampropowerwashing3531]

Going to build one this week! I have used that pump in the past to clean a roof but I batch mixed. I’m going to hook it up to my proportioner this time.

[@TheFreshRinse]

I’m interested in how well it works for you. Keep me posted please!

[@577buttfan]

I think that thing will hang with a 5.5 no?? Pretty cool man,I may build one!

[@eveliomartinez3255]

Can it be run with 1/2” proportioner?

[@rickybobby5046]

How long did the pump last when you were batch mixing?

[@KidExteriors]

Going to get one of these setups for the flatbed that we will be building.

[@TheFreshRinse]

@@KidExteriors I can’t say enough about it. The release will be soon.

[@justin95222]

I have had mine for a while but I finally hooked it up and played with it today, I hooked up my regular garden hose and a 3/16 tip and it was shooting about 50 ft, blows me away what an impressive little pump it is

[@TheFreshRinse]

@@justin95222 Too much fun

[@EliteWashServicesLLC]

Setup looks clean! We would love to have a setup like that for our small open trailer here in Indiana. Definitely needs a muffler upgrade lol. Good stuff though!

[@TheFreshRinse]

@@EliteWashServicesLLC It definitely has potential. I’m seriously going to look into the muffler upgrade

[@EliteWashServicesLLC]

@ look the proportional setup! Would love the details on that and if the machine shop would make me one.

[@clearwaterprowash]

What part of Indiana?

[@EliteWashServicesLLC]

@ we cover from Terre Haute indiana to Indianapolis Indiana currently

[@tedbettker2634]

I am definitely putting one of this on my training over the winter

[@TheFreshRinse]

@@tedbettker2634 I’m loving it so far

[@GlennBrightWash]

Thank for the info Mike. I've seen the video about this pump you referenced in your video but wasn't sure about it until you tried it. Going to give it a try it's not much more if any than a good 12 volt pump. Just bought the pump today from Harbor Freight, will install this winter.

[@TheFreshRinse]

@@GlennBrightWash Very cool. I’m very interested in what you come up with.

[@KuhnsPressureProsLLC]

I built one a couple of months ago and it works great. Only 2 problems I witnessed that I figured I'd let you know about. 1. It doesn't like to prime up in the air, I started it up and got up on a roof and it wouldn't pull anything through it, had to go down on the ground and start pulling solution then get on the roof. 2. In the whole process of getting up on the roof and it not pulling solution, after continuing to mess with it on the roof to try fix it it overheated and blew the bottom drain plug out. Threw 6% SH everywhere on everything!

[@TheFreshRinse]

@@KuhnsPressureProsLLC Well, that’s… a lot. I really appreciate the heads up. Thank you!!!

[@tedbettker2634]

This is act a really awesome idea Great job mike

[@TheFreshRinse]

@@tedbettker2634 Thank you Ted!

[@GreggthaChristian]

Yeah, you already know this... but, having different packages for the cheap shot would be suggested 🤷🏻‍♂️ one basic level : motor, mounting plate. One intermediate level: add hoses and fittings. One advanced level, remote mixer etc. You know what you're doing ! 👍🏻👍🏻 love you brother 🙏🏻 God bless

[@TheFreshRinse]

@@GreggthaChristian Thank you sir. I never dismiss quality information. I’m grateful!

[@JohnS1212]

For us Military types. Home Depot has a Special Buy of the same machine (rebranded ExtremePowerUS) for $204.41. 10% Military Discount brought the price down to $183.70 before tax. Also, Amazon has the same ExtremePowerUS system for $179.95. I chose Home Depot because of the local service if necessary.

[@TheFreshRinse]

@@JohnS1212 That’s quality information! Thank you sir!

[@joshhoward4735]

I’m using it and it works great

[@mudfrog76]

Any bypass on this system..how long can you let it sit off the trigger?

[@TheFreshRinse]

@@mudfrog76 Joseph says 10 minutes. No bypass.

[@GlennBrightWash]

One question did you change the direction of your discharge port? Mine is facing the other way.

[@TheFreshRinse]

@@GlennBrightWash Great question. Yes, it is interchangeable.

[@GlennBrightWash]

@@TheFreshRinse Thank you.

[@galaxyfederation5347]

I’ll bet there is a viable market for a Cheap Shot complete package. Would love to see it! Thanks Mike

[@TheFreshRinse]

@@galaxyfederation5347 I wish I had a shop. Thank you

[@UnclaimedStorageTreasures]

I would be interested

[@tomalley798]

If I can give you any advice it would be to lay off the AR45 and invest in Leon’s moflow pump. It’s the only pump you need for washing except for Concreat washing

[@TheFreshRinse]

@@tomalley798 I like the way you think!

[@fran73968]

Great job

[@TheFreshRinse]

@@fran73968 Thank you Fran

[@aaronbailey3640]

I'm really excited about this machine.

[@TheFreshRinse]

@@aaronbailey3640 I’m liking it a lot for a legitimate 12 volt replacement

[@paulsuli3581]

can you do a distance test. curious to see how far is shoots

[@TheFreshRinse]

@@paulsuli3581 Yes, I’m in Chicago for the we. When I get back in town I’ll do that. Thank you for your interest.

[@Sophieblair6934]

When you say 1% how much solution to water is it exactly?

[@TheFreshRinse]

@@Sophieblair6934 Literally 1%. It begins at 12.5 (we round down to 12 for easy math).

[@Sophieblair6934]

@100 gallons of water to I gallon of sodium hypochlorite?

[@Eric-t8v]

11 gallons to 1 gallon sh

[@nick32141]

How many gallons per minute is this? Also, where do you purchase this and what’s it called?

[@TheFreshRinse]

@@nick32141 lots of details coming very soon. It’s called the cheap shot. I will be manufacturing and selling them very soon. Stay tuned!

[@citruspressurewash]

I like this set up, you can put your manifold exit on a cam lock and switch between 12v if needed. Simple

[@TheFreshRinse]

@@citruspressurewash Very nice!

[@tonybersano2428]

What model water boss gun ate you using ?

[@TheFreshRinse]

That’s a great question. I use the 750

[@superblastpressurewashing.7256]

Nice little unit Mike works great. Get after it.

[@TheFreshRinse]

@@superblastpressurewashing.7256 Thank you Don!

[@Twista1300]

How long can you stay off of the trigger?

[@TheFreshRinse]

@@Twista1300 Joseph says he has been off the trigger 10 minutes.

[@Twista1300]

Ok I was curious about how it bypasses, or if it even did that. I appreciate the reply

[@xxdeadlocksxx]

Does the engine pump burn out? Say you left it on but not spraying for 10 minutes. would it burn the pump on the engine?

[@xxdeadlocksxx]

Never mind I see the answer in the comments!

[@AdvancedSoftwashLLC]

@@xxdeadlocksxxit would probably be fine even longer, I just wouldn’t recommend 😁

[@TheFreshRinse]

@@xxdeadlocksxx Thank you for watching!

[@MR.TOYBOX]

@@AdvancedSoftwashLLC Can you use 200ft of flexzilla hose or is 100ft the max for it to work well?

[@AdvancedSoftwashLLC]

@@MR.TOYBOXI have 250

[@northjerseykevin409]

I like it. Don’t forget to keep an eye on the oil and maybe it would be a good idea to change it more than you typically do. I’m assuming tolerances aren’t as tight and it’s definitely running at high RPM

[@TheFreshRinse]

@@northjerseykevin409 That’s a great pro tip. Absolutely!

[@WATER_WIZARDVB]

I use that same pump right now. The only problem with it is is that I can’t bypass it so it sounds like you figured out a way to bypass so that you can let off the gun or did you not?

[@TheFreshRinse]

@@WATER_WIZARDVB Great question. No bypass. Have you had any issues? How many gallons per minute have you gotten?

[@WATER_WIZARDVB]

i’m at about 8 to 9 gallons and yes I had it blew out the plastic plug on top and I have replaced that with the brass plugs and I mainly use it for rinsing because I noticed that it used a lot of surfactant running it on 1 inch inlet and three-quarter outlet

[@WATER_WIZARDVB]

I’m either going to figure out a way to bypass it or I’m going to add a remote shut off in it so if I’m away from the unit far away and I can’t get to it quick enough, I can shut it off remotely and that would be using the Killswitch that’s already there with the remote

[@noby5711]

What are the decibels on that thing haha. How does it compair to the gx690?

[@TheFreshRinse]

@@noby5711 It’s not as loud as it it high pitched. Still annoying.

[@youngexteriorservices]

So the thought is the turning off of the SH and rinsing will flush out the SH from the pump? I wonder how long the pump will last running SH through it...

[@TheFreshRinse]

The beautiful thing is, you can remove the cap on top of the pump (hand tight) and pour in neutralizer. And antifreeze in the winter

[@samsonitepaintingmorellc7383]

How long can you stay off the gun with the Cheap Shot running?

[@TheFreshRinse]

@@samsonitepaintingmorellc7383 Joseph has been off the trigger 10 minutes

[@MrSuperchargedv8]

Who made your shirts i need some done for my crew.

[@TheFreshRinse]

@@MrSuperchargedv8 www.fin-print.com

[@allveteranspressurewashing]

Hey Mike. Like I said finally got mine all built. No leaks all hooked up but I am not getting near the flow you're getting. Any ideas? 1" proportioner and 100ft 5/8 garden hose and red gun. Any thoughts would be appreciated.

[@TheFreshRinse]

@@allveteranspressurewashing Have you loosened the throttle set screw?

[@allveteranspressurewashing]

@@TheFreshRinse 😳 nope. Man TY totally forgot about that.

[@allveteranspressurewashing]

@@TheFreshRinse I did TY. Huge difference. I am using a firehose style garden hose for now till I get the connections. Man it's like a fire hydrant hose now lol. TY!! God bless you Mike

[@allveteranspressurewashing]

@@TheFreshRinse Mike do you know anyone that can fix my GMB page? It got suspended immediately for no reason. Ive tried everything and spent a few hours readying and trying to get it unsuspended'

[@ericmyers336]

Where’d you get the proportioner?

[@PearsonPressureWashing]

I bought that pump from harbor freight down here Tennessee I needed something stronger than a 12 volt for a tall concrete gymnasium I soft washed , I figured if it at least got me through that job it would be worth it. That was 8 month’s ago and I’ve used it on probably 25 others jobs mostly bigger jobs

[@TheFreshRinse]

@@PearsonPressureWashing That is great news. Do you know how many GPM you’re getting with yours? Also, does it look to be as strong (or stronger) than mine?

[@PearsonPressureWashing]

Mine says 35 gpm 😅😅 it’s a 79cc. I batch mix from 30 gallon barrels, it takes mine about 4 minutes to fill a 30 gallon barrel up

[@PearsonPressureWashing]

@@TheFreshRinse looks similar to your stream… I’m using my 1/2 inch hose I already have on a reel with 200ft length,I’m getting around 35-40 feet in height with no wind , compared to my 12 volt at 25ft ish reach

[@JamesStrickland-bi7vb]

No issue running sh through it yet?

[@PearsonPressureWashing]

@@JamesStrickland-bi7vb I flush about 15 or more gallons of water through it after each use it still spits out a lot of rust when I first use it after letting it sit a few weeks but have not had any issues of it breaking down yet and it is noisy unfortunately

[@JaysChannel24]

Also, do you just screw on that flex zilla hose? I’ve had bad experiences with leaks using that screw on for my Softwash hose, now I just cut it off and use barbs and clamps

[@TheFreshRinse]

@@JaysChannel24 Yes, but I plan to get cam locks

[@rustytownsend450]

Send it over the Ring camera! 😂 sweet lil setup Mike!

[@TheFreshRinse]

@@rustytownsend450 LOL Just water at tgat point. LOLOLOL. I considered editing that part out. LOL

[@rustytownsend450]

@ hahaha! Wash on!

[@mixedberries4937]

Do you have a breakdown on cost for the cheap shot

[@TheFreshRinse]

@@mixedberries4937 Not yet. Working on it

[@mixedberries4937]

@@TheFreshRinse thank you!

[@Free_American]

@@TheFreshRinseyeah I would definitely be interested as well, Sir

[@ThomasWeatherford-hd7dd]

How does it by pass when your not on the trigger?

[@TheFreshRinse]

@@ThomasWeatherford-hd7dd No bypass. Joseph has been off the trigger 10 minutes.

[@jeremymain6096]

Hi Mike great video I might have to try one of the pumps. What kind of tanks are you using on your truck? We are in Michigan

[@TheFreshRinse]

@@jeremymain6096 I’m not sure what kind of buffer tank it is. The SH tank is a 100 gallon Water Dragon

[@jd-it4on]

So does the pump shut off while u r not spraying or does it continue?and if so is that going to burn it out fast? Also r u selling those complete systems but I would want the surfactant option.

[@TheFreshRinse]

@@jd-it4on it does stop flowing, yes. It does not require a bypass, but being off the trigger for long period time is not advised. Joseph says he has been off the trigger for 10 minutes with no p. Still not advised. I’m unsure of the future, but yes, if I do, a surfactant valve is absolutely doable.

[@washprosplus]

That looked way better than the 12v. Good stuff

[@TheFreshRinse]

@@washprosplus Yes, way better

[@washprosplus]

@TheFreshRinse now I want one

[@americanpropertystars]

It’s weird watching you pull start a machine! You’ve earned that right!!!

[@TheFreshRinse]

@@americanpropertystars True! LOLOLOL I do it under my breath

[@JaysChannel24]

Cool product Mike! What pump is on that harbor freight motor? Edit- I saw the harbor freight one with the 35gpm pump if that’s it.

[@TheFreshRinse]

@@JaysChannel24 79 cc is all I know. I must have gotten the super loud version. LOL

[@440pressurewashing]

Are you going to be selling a system like that one

[@TheFreshRinse]

@@440pressurewashing That is yet to be seen. Thank you for your interest.

[@lukerestlessstudios]

So if this can get about 9 gallons per minute after the reductions. I wonder what the larger trash pumps can do.

[@TheFreshRinse]

@@lukerestlessstudios I’m really not sure. I think the problem with those larger pumps will be so much pressure/flow into the proportioner. I could be wrong

[@jamestribbitt9684]

Hey man, are you recording with an Insta360? I noticed the slight fisheye and how the shot seems to glide around. I just got one and was curious.

[@TheFreshRinse]

@@jamestribbitt9684 No sir. iPhone 14 Max

[@tomalley798]

You are definitely a salesman 😁

[@TheFreshRinse]

@@tomalley798 What do I have to do to put you in one of these beauties? LOL

[@brianaird2193]

Hi Mike! I SAID HI MIKE, GREAT JOB WITH THAT HOUSE WASH! 😂 HOW LONG CAN YOU STAY OFF THE TRIGGER? NO BYPASS?😂 Just having some fun here, I know you Get It. 👊🏼 1 P B 💥

[@TheFreshRinse]

@@brianaird2193 Thing is loud! NO BYPASS. JOSEPH HAS BEEN OFF THE TRIGGER 10 MINUTES!!!

[@I5ZQ8]

That little engine does not sound happy revving that high 😅

[@577buttfan]

Sure it does lol🎉

[@TheFreshRinse]

@@I5ZQ8 It’s hating life. LOL

[@HitmannPayne]

Why won’t it do more than 60psi?

[@TheFreshRinse]

@@HitmannPayne I’m thinking that’s all it’s rated for. Not really sure

[@HitmannPayne]

@ from the calculations with 95ft max head, it’s putting out about 41 psi.

[@tonycalabrese8438]

Very intrigued by this little unit. Wondering about longevity. Will it last longer than a 12v? I guess we're going to find out! I bet it sips fuel too!

[@TheFreshRinse]

@@tonycalabrese8438 I’m excited to find out too. Time will tell. Sadly, my season is coming to an end. Not sure yet about fuel.

[@colonialfiend]

It'll definitely need a fresh water rinse valve before the pump and be flushed for 5 or so minutes immediately after every use. I've watched videos of the guy who made it and I don't think his volume of work is the same as most. The internal parts of that pump will not last long with bleach.

[@AdvancedSoftwashLLC]

@@colonialfiendthey are holding up fine. My volume of work is on par with most in my area. The pump has held up fine to 6 months of roof mixes. Just flush it out well

[@colonialfiend]

My mind is on overdrive.... -It's not feasible without a reel. Is the flow so restricted through a reel that it's not better than a 12v? - it 1000% needs to be flushed immediately after every use I'm going to build one this winter and put a rinse valve on it and run it through a hose . However, this has been tried before and isn't new so I don't think longevity is there but I have to do it personally. My 12v pump that I transfer bleach from my drums to my tank is still working after 4 years and that's because I immediately flush it with water so perhaps this set up can do the same

[@AdvancedSoftwashLLC]

@@colonialfiendrunning through a 1/2 hose reel isn’t restricting mine at all. Flushing is definitely the deciding factor for how long the pump will last! But if for some reason it doesn’t last, it’s no cheaper than replacing a 12v pump

[@benderprofessionalservices9018]

How about now Mike its been 11 hours since someone asked. What’s the price? Hahahha. Definitely interested. Might just be able to put it in place of my 12v pump with quick connects and keep everything as it is.

[@TheFreshRinse]

@@benderprofessionalservices9018 The only difference is the 1” manifold. Perhaps a 3/4 would work?

[@TheDbell]

Well, now i gotta figure out where i went wrong when i tried to use that machine for soft washing 🤦‍♂️

[@TheFreshRinse]

@@TheDbell LOL It’s all trial and error. You’ll get it.

[@milanogolfer]

I'm hearing a minibike in the background.

[@TheFreshRinse]

@@milanogolfer LOLOLOL Exactly!

[@AdvancedSoftwashLLC]

Beautiful! It is obnoxiously loud unfortunately.😬 but hey, it’s good marketing!

[@TheFreshRinse]

@@AdvancedSoftwashLLC Yup! Like a small lawn mower.

[@leveragelifestyle8581]

First pull baby!

[@TheFreshRinse]

@@leveragelifestyle8581 Boom!

[@Jleonard1987]

Super Pump Killer

[@TheFreshRinse]

@@Jleonard1987 LOL Not hardly! LOL

[@LowkeyCatDaddy]

FIRST PULL 🎉

[@TheFreshRinse]

@@LowkeyCatDaddy LOL True

[@brians5633]

No thanks ill stick with my ar45 with honda. 60 psi is not enough unfortunately.

[@TheFreshRinse]

@@brians5633 Definitely not an AR45, as I stated in the videos. Still works perfectly fine for its intended use.

[@SJVA]

Thank you. Purchaseed that pump today from Harbor Freight.

[@TheFreshRinse]

@@SJVA Keep me posted on your results

[@Marty-zd2lm]

Kinda a shame these two companies pioneered this invention and it’s so basic enough for anyone to build and they won’t basically make money from it. Yes they have a site but….🤷🏼‍♂️hope people will buy from them.

[@TheFreshRinse]

@@Marty-zd2lm We shall see.

[@Marty-zd2lm]

Hope I didn’t take a cheap shot here…. I just want them to make money with their invention lol cheap shot haha

[@mixedberries4937]

Incredible

[@TheFreshRinse]

@@mixedberries4937 Thank you