Road and Pavement Diorama *Tutorial* EP16

A simple Road and Pavement diorama tutorial,
Hope this tutorial can help you.
Hit like if you liked this video and subscribe to see more budget diorama ideas i have to offer.
Items needed:
THP CFoam
Styrofoam
PVA Glue
Plastic Plates
Soldering Tool
Masking Tape
Black Spray Paint
Grey Spray Paint
Yellow Spray Paint
Black acrylic Paint
Previous video link:
• Water Pipes Diorama *T...
Action Figures used in this video:
Marvel Legends Cable | 2016 X-Men Juggernaut Wave BAF Action Figure
Adventures by A Himitsu / a-himitsu
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons.org/licenses/b...
Music released by Argofox • A Himitsu - Adventures...
Music provided by Audio Library • Adventures - A Himitsu...
#PatrickOhm #Diorama #Marvel
Sorry for bad English,
Subscribe if you wish to see more upcoming tutorials,
hit "LIKE" if you "LIKE" this video!
Thank you and see you again.

[@georgesmith8255]

The pink foam board you get at Home Depot is a much better foam to use... sometimes you can find blue foam board but that come from Lowe’s .. I always use the pink board cause I just like it better for some reason .. you can use white foam.. but it’s made with the little pellets and you can always see the texture of the pellets in your finished product.. plus it’s VERY messy to work with and it will break easier then he blue or pink foam ... the pink foam board comes in 2x2 squares for like 5 or 6 bucks ... plus you can get it cheaper is if you buy the 4x8 sheets and cut it down to size to store... plus the 4x8 sheets come in many different thicknesses... also I love how the pink foam takes paint... also I use big flats stones like for landscaping and push into the foam to get lots of different textures..aluminum foil rolled into huge balls hen flatten also makes great textures for foam ...

[@PatrickOhm]

Yes thank you for the info my friend, and yes I do wanna get blue/pink foam but it's hard for me to get them in Malaysia, in my area here, the best we can get is this THP foam and other blue foams requires shipping from outside of Malaysia and usually the shipping cost much much more than the product itself due to the size and weight, so I gotta work with what I have 😔

[@AZURAKAZ]

Thank you for dropping these indespensable gems.

[@PatrickOhm]

James Starrett wow thank you for your generous words 😂😂

[@drat1566]

Thanks for making this channel! This is just what I need. I checked out books on dioramas and 50% of each one was text about "asymmetrical warfare" and other military stuff that had nothing to do with techniques or processes.

[@PatrickOhm]

Hahahaha well thank you for watching and I'm so glad u found my channel, thank you and I am humbled my friend 🔥

[@preetisharma4381]

Awesome work !!! Thanks for this tutorial.

[@vilfheram]

Exactly the tutorial I was waiting for, to much appreciated

[@PatrickOhm]

Hey thank you for watching and your kind comment, 🖖🖖

[@lokiwartooth1138]

Man I wish I had seen your work earlier in time. But very glad I did at all.

[@nurabdul1436]

Lawa ni.. Terbaik!

[@PatrickOhm]

nur abdul Terima kasih bro, thank you for your kind words 😁🙏🏼

[@alvisjoubert664]

This is great dude! All the episodes of this project are very helpful! Amazing job and very original! 👊💪

[@PatrickOhm]

Hey really glad to hear your kind and humble words my friend, really appreciate you watching, thank you 🙏🙏🙏

[@djanoke-deepartberlin7076]

Great Work!! looks real REAL!

[@PatrickOhm]

Thank you for your humble words 🙏🙏

[@carolanneng4633]

Wow! Great work!

[@PatrickOhm]

Carol Anne Ng thank you for your humble words 😊

[@jcdebelen2344]

I always wondered how to make those yellow stripes on the pavements.. this is very good work!

[@PatrickOhm]

JC De Belen thanks alot bro, but however to make lines with spray painting is hard, as u need to cover up alot with newspaper and masking tape, a more faster method would be painting by hand, so less masking is required 😉✋thank you for watching

[@tankeatmunn5384]

Naiseeee macam real place brooo

[@PatrickOhm]

Tan Keat munn till you see the real thing then not too macam real, haha because video contrast maybe, hahaha

[@lawcreations6805]

Great techniques!! You have a steady hand, you rarely use a ruler to cut and you have straight lines. Love the texture stamp you made and the masking technique was very helpful. Thank you for sharing!!

[@PatrickOhm]

Law Creations as always you are welcome brother, and the best part about a damaged diorama is, sometimes not having a steady hand is even better, the whole point of having a damage look, hahaha, thanks again for your kind comments

[@lawcreations6805]

Mr Ohm, come join law creations and friends Facebook group. Share your channel and work. We'd love to have you.

[@PatrickOhm]

Wow sounds great, there is a group? I'm on my way, hitting up FB now

[@lawcreations6805]

Definitely honored to have you!! Please share your channel and work!!

[@PatrickOhm]

Law Creations already there!! 😂 🤘🏼🙏🏼

[@CSdiecasttuning]

Amazing work 👍🏻👍🏻👍🏻must have a go 😊

[@PatrickOhm]

CS.diecast tuning thank you for your humble words 🙏🏼🙏🏼🙏🏼😊😊😊

[@cardinal_polo]

Amazing ❤

[@sunchaserw1477]

That is such a great project! I always wanted to learn how to make lighting circuits in my diorama but just din know how to start. I never learnt building circuits before.

[@PatrickOhm]

Argh same here, always wanted to but never knew how, just get small torch and light devices, create a compartment and just slot them in individually to create lighting, hahaha

[@sunchaserw1477]

@@PatrickOhm But u did it so good, Patrick

[@PatrickOhm]

@@sunchaserw1477 oh thank you for your overwhelming comment, thank you very much, glad this video can help u 😊🙏🙏🙏

[@bruce7630]

great work. you're an architect!

[@PatrickOhm]

bill boin hahahaha you are overly kind with your words, wasn't expecting architect, hahaha but thank you very much 😂

[@Trendsetta68]

Fantastic!

[@PatrickOhm]

🙏🙏🙏🙏😁

[@GhostWolf141]

Awesome.

[@PatrickOhm]

Thank you 😁✌

[@evertonmaia63]

Muito bacana mesmo!

[@PatrickOhm]

obrigado irmão

[@TheMagoMedov200]

Nice tutorial Buddy👍🏻

[@PatrickOhm]

Thank you for your guidance

[@tinilestari209]

Amazing

[@PatrickOhm]

Tini Lestari thank you for watching 😁🙏🏼

[@markgriffith3076]

Absolutely awesome my friend, glad I found your channel and have subbed😊🙌

[@PatrickOhm]

Hey thank you so so much for watching, I really appreciate it alot 😁😁😁🤟

[@eduardolimoeiro1327]

amazing ! You rules man !

[@PatrickOhm]

EDUARDO LIMOEIRO thank you for your very kind words 😊😊🙏🏼🙏🏼

[@diecastchannelminiaturasde2357]

That’s awesome! I’ll try that myself! Congrats! You’ve got one more like and one more subscriber!

[@PatrickOhm]

Hey thank you very much for your kind and humble support 🙏🙏🙏

[@diecastchannelminiaturasde2357]

Any time, pal! I do thank you for sharing your awesome dioramas and techniques!

[@PatrickOhm]

@@diecastchannelminiaturasde2357 🙏🙏🙏 thank you and do stay tune for a huge update, im making some changes to the channel and should be back before January 2019 😁

[@eduardolimoeiro1327]

awesome man !!!

[@PatrickOhm]

Thank you very much for watching ☺🙏

[@emilflognoid1532]

Freaks me out algorithm reads my mind… was making breakfast and thinking “how do I do concrete effects for a miniature?” I didn’t even say it out loud… then I sit down and this pops up.

[@abenih3013]

thanks for answering my question!

[@PatrickOhm]

Danish Alim no problem bro, my next upcoming project, I will show you how I use pva glue and powder, that works for jungle types of ground or maybe Warzond types, stay tuned bro 😊🙏🏼

[@imansober6886]

13:06 there's Lee Chong Wei from Malaysia. Im proud to be Malaysian

[@PatrickOhm]

Malaysia boleh 🙏🙏🙏

[@filipedias6236]

Awesome video! Where do you get items such as the shutter door and the piping?

[@cadopotado8965]

What I’m gonna use for my dioramas is wood layered over with drywall mud.

[@PatrickOhm]

Not a bad idea at all, thanks for the tip

[@carlbosman825]

Fantastic work. Please can you tell me which tutorial covers the making of downpipes - thanks so much.

[@PatrickOhm]

Carl Bosman title is ep15 under tutorial section on my KZbin account page 😊😊🙏🏼🙏🏼thank you for watching bro

[@OmochaNerd]

Wow Great work man. Keep it coming. Question : What kind of spray paint do you use for the black wash for the pavement? Doesn't the normal spray paint dissolve (eat into) the foam? I tried spraying with it, that's what happened.

[@PatrickOhm]

Lee Cherh thanks alot for your encouraging words, anyway to answer your question, I actually use various types of spray paint, as long as they r cheap and simple to be honest, yes it will eat up the foam like acid, but: 1 : don't hit the nozzle and spray the whole thing, one-two second max, spray from left to right, count up to 2 seconds, quick swipe with spray paint. 2 : go light, for example, if you wanna spray black on white, follow method 1, and you will see a very thin layer, it will look grey at first, but just let it sit for 5 seconds maybe? Then another layer, and keep on going till its the color you desire. 3 : most important rule, don't spray too closely, the distance from your spray can to the foam should at least be 10-12cm away and it will all be okay.. Good luck 👌🏼 hope this helps 😀

[@katiehunter7313]

what a supple muffin~

[@PatrickOhm]

Thanks? 😂😊🙏 happy new year!!

[@AbelG8781]

NICE NICE NIIIICCCEEEE

[@PatrickOhm]

Thank you very much 😁😁🙏🙏

[@jitsroller]

Coolio!

[@PatrickOhm]

Thank you for watching

[@Elcaminotodeath]

Beautiful work! What materials did you use for that cool gate and the brick walls?

[@PatrickOhm]

I have the items listed down in my description, hope that helps 😁👍🏻 and all the materials used are listed on the video as well

[@botanicalcorneradmin397]

This is so awesome bro! Appreciate you for sharing your tricks! Also may I ask how you made the working light? I’m new to dio building and just curious as to how to pull the light part off. Thanks!

[@PatrickOhm]

Hey thank you for watching, really appreciate it, anyway that light is a mini table lamp, an LED prop, I just cut off the stands and use the top part😁🤟🏻 however I do not have any links to that light piece, I got mine from a dollar store near my location

[@botanicalcorneradmin397]

@@PatrickOhm welcome and thanks Patrick ! That’s a big help and I’ll check it out ! Love your work and keep creating !

[@PatrickOhm]

@@botanicalcorneradmin397 🤟🏻🤟🏻🤟🏻 thank you very very much

[@DIY4CFH]

Awesome video. Does the spray paint not melt the foam like insulation foam boards?

[@PatrickOhm]

Not if you spray it from a distance, but I can tell u this, it does create dust, so it is important to let it dry under the sun instead of under a fan, the finishing has a very big difference

[@DIY4CFH]

@@PatrickOhm thanks. Where do you normally get your foam from?

[@PatrickOhm]

@@DIY4CFH subjective question bro, depends on which country you are from, I got mine from Malaysia, many has asked me this question and I realized that different countries have different foams available to them but any how I only suggest THP or XPS, avoid styrofoam no matter what 🙏🤘

[@ngopi1385]

inspire me

[@eyalyurconi]

Amazing work!!! Do you happen to a link for where to buy the cfoam? Struggling to find it.

[@PatrickOhm]

Eyal Yurconi agh sorry bro no I don't as I do not know where to find them online, I found mine in a store but I would recommend u to buy foam online as it will risk breaking, anyway this foam is called a THP foam, or u can try XPS cream foam 😋👍🏻

[@Rogelio_007]

So cool. What is the top coat you were talking about covering it with? Thanks in advance :-)

[@PatrickOhm]

Just a normal top coat from the hard ware store, I use it to just make the color more flat and in a way to hold everything in place, the types of paints I use and etc, so top coat to me is like a shell, but do check our my later videos, I now use mod podge, they work better

[@kevinheffernan7105]

class

[@PatrickOhm]

😁🤟🏻

[@joecoz26]

Great tutorial but I don’t think the asphalt is shiny.

[@PatrickOhm]

Ah yes you are right, maybe because while I was filming, the paint is not fully cured, but after time, it gets much more flatter

[@kevlael2770]

Hi love your videos. Probably going to sound a silly question but what is a top coat? And yes I know it's not to keep it warm.

[@PatrickOhm]

no worries bro, feel free to ask anything, top coat is a spray type, there is a spraypaint called top coat. like a thin transparent layer of paint to lock everything in place =)

[@kevlael2770]

@@PatrickOhm ace thanks mate going to attempt to build one with my son

[@juliocortes6305]

Greta work. Does the spray paint "eat" up the foam??

[@PatrickOhm]

Ok now this is subjective, subjected to how far and close your spray can is to the foam surface, as long as you go light with the spray, then it would be fine, just dont spray on to the foam directly

[@juliocortes6305]

@@PatrickOhm thanks i would try it out

[@PatrickOhm]

@@juliocortes6305 yeah just remember to go light with the layers, dont let the colors show on the first attempt, for example if you are going black, just go light and get the grey first, let it rest for about 15mins then go with the second layer, then that way you can slowly build up to black, and that will avoid the foam to be eaten

[@arni7810]

Awesome video. Where can I get that garage lighting system.?

[@PatrickOhm]

That is actually a small 1/6 scale table lamp I got from the dollar store, sorry i do not have an online link for this 😔

[@arni7810]

@@PatrickOhm oh wow, no worries that is good info. I'll use that to find one. Thanks so much

[@officialmigueln8925]

Are you using a foam safe spray paint or are you spraying far enough so the spray paint doesn’t eat away at the foam.

[@PatrickOhm]

Official MiguelN nope my friend, literally just a typical cheap hardware store spray paint, as long as you spray it from a distance, the foam won't be eaten. So it's all good, it's all about the distance you spray from

[@officialmigueln8925]

Wow thank you so much for the reply in such short time as well

[@PatrickOhm]

Official MiguelN no probs at all bro, just glad I could help 😊🙏🏼

[@davidschweikhart459]

Nice job sir. A couple things. the cracks in the Asphalt, try not to make them so straight and smooth. Asphalt usually does not crack in smooth straight lines. The other thing. The vertical drain pipe and 90 degree ant the end over the grate, it looks way out of scale to me for some reason. Except for those two things it looks real good! Good Job!

[@PatrickOhm]

Thank you for your feedback my friend, and yes I have to agree the drain cover looks too huge, im also bad when it comes to scaling 🤣🤣 will try my best to avoid this problem in the future and yes the cracks I have to admit, it doesn't look good..I will try to remake another one soon with better proportions..thanks for watching brother 😁🙏

[@davidschweikhart459]

@@PatrickOhm You're welcome. I'm going to be trying out Diorama's in the very near future.

[@PatrickOhm]

@@davidschweikhart459 ah nice 😁🙏 looking forward to seeing them

[@abrahamflores4991]

I like what he did , the only thing I really felt that he over did was the cracks. To me he should of just left it out . Overall , I like the work please don’t get upset at my comment I am thinking of doing this project but without the cracks and I will post

[@PatrickOhm]

no dont worry my friend, i encourage constructive criticism, and thank you for your feedback, will help me alot for my upcoming videos, thank you very much for watching =)

[@yanivanchristian29]

Hi just want to ask, what spray paint that u use?i tried to spray with pylox spray and it made lots of holes on the foam

[@PatrickOhm]

I'm actually using for canned spray, no worries, I know what you are going thru, happened to me as well last time, the secret is to go with light layers, and dont spray too close to the foam, the chemical is eating the foam that's all, as long as your paint are light layers, then it would be find and always spray from a distance maybe 10-12 inches away

[@yanivanchristian29]

Thankss for the reply and advice, will try to do it so..love your channel n ur work

[@PatrickOhm]

@@yanivanchristian29 hey thank you for your kind words and thank you for watching 😊🙏🙏

[@KatRo13834]

Great work! What top coat do you prefer to use?

[@PatrickOhm]

Katji Romero to be honest no brands in particular, trying to go cheap and simple, anything cheap from the hardware store will do, I dont really use the same brand always, haha

[@KatRo13834]

Patrick Ohm I've heard some sealants eat the foam. I'm just starting to do this, so I'm trying to research but a lot of the info is contradictory. Any general examples you could give? I went and bought a couple different ones from a photo sealer to mod podge spray and now I'm scared to use either. Not that I can't tinker with them, but I hate being wasteful. Hehe

[@PatrickOhm]

Katji Romero hmmm I guess this matter is pretty subjective as we both are using different paints and foam, maybe before u damage your hard work with spray, maybe do like I do, cut out small pieces of foam and test out the paint before you paint it on your real work and damage it if paint doesn't work out

[@KatRo13834]

Patrick Ohm Thank you. Again, your work is amazing 😊

[@PatrickOhm]

Katji Romero hope my suggestion helps and thank you for watching, really appreciate it

[@dupacalypse9468]

Where did you buy the row of blue plastic fence material from?

[@PatrickOhm]

Used for gardening, you should be able to find them in the gardening isle ☺👌🏻

[@diorama_dad]

What did you use for the light fixture?

[@PatrickOhm]

Its just a mini table lamp then I modified, got it from a dollar store, more like key chain😁🙏

[@harleyquinn281]

How do u make that big wall? That u always use

[@PatrickOhm]

Basically did it with a blunt pencil and simply just scratch the foam 😁

[@jimniesinclair1898]

Good day Sir Patrick.. I want to ask some question.. Do u always paint the black first for the base everytime and then after that u add the shade.??

[@PatrickOhm]

Yes, well its so that I can make sure my colored layers would look darker later, if i were to paint on the white foam straight away, the colour would be too light and by layering a coat of black before you paint, you can actually make the cracks look more obvious

[@jimniesinclair1898]

@@PatrickOhm How about brick colour.?? Should I paint it black first.??

[@PatrickOhm]

@@jimniesinclair1898 depends on your brick color but I usually just paint black to balance it out and in a way, because your brick lines are sculpted in, so black first then dry brush the bricks later would be much easier, so you don't have to paint the lines later

[@jimniesinclair1898]

@@PatrickOhm Aahhh I see.. I get it now.. Thank a lot for ur advices.. Hope u will success with ur youtube and ur hobby..!! Stay healthy sir.. Gbu 😁🙏

[@PatrickOhm]

@@jimniesinclair1898 hey thank you so so much for your kind wishes, God bless you too my friend and pray this pandemic goes away soon 🤟

[@ahmedpeiro]

Can i ise the heat gun to bend the goam after glueing it?

[@PatrickOhm]

I am not sure if that works, anyways what are planning to bend? Maybe you can think of alternative ways to create what you have in plan? I never tried heating and bending and I doubt that works, never tried it, so sorry 🙏🙏

[@ahmadridzuan8371]

Subscribed cool malaysia boleh 😁

[@PatrickOhm]

hey terima kasih bro..yea malaysia boleh! hahaha so nice to meet another Malaysian subscriber, thank you for your kind support

[@Jindaime]

Have you ever done a dirt floor one like a desert?

[@PatrickOhm]

Tried it once, very hard to maintain and hard to store, very dusty

[@Jindaime]

@@PatrickOhm that didn't even crossed my mind that's why probably I don't see a lot of them thanks again 👍 💯

[@PatrickOhm]

@@Jindaime anytime my friend 😄👍🏻 stay safe and thank you for watching 😁

[@aljonjetroquinto5845]

What is the best acrylic paint for Styro foam? I am using Creation by Valiant. I also have KolorPlus and it says TEXTILE on it is that ideal for Styro? Hope I can show you pictures. I just started creating dioramas for my pokemon figures. Thanks in advance.

[@PatrickOhm]

Ok to be honest im not too such which fits which as I usually just use a standard cheap paint I get get access to, but I do know one thing, get modpodge, that would work well as a top coat to lock everything in place, sometimes I even use markers and pastel paints with hardware store spray paints, just make sure u cover a coat of modpodge after that, works like a charm

[@aljonjetroquinto5845]

@@PatrickOhm ooh will have to try that as well. im gonna go check a modpodge. thanks

[@PatrickOhm]

@@aljonjetroquinto5845 oh and one more thing, remember to get the matt one. Would help alot with making the bricks and ground stand out

[@aljonjetroquinto5845]

@@PatrickOhm noted. and I just finished watching this video: Polystyrene Foam Issue *Tutorial* EP22 I think the tissue roll technique is a great idea. and will also try the technique using baby powder.

[@PatrickOhm]

@@aljonjetroquinto5845 oh yes is useful for polystyrene type foam but again that is only suitable for rock surface, doesn't work well for brick texture type dios 🙏

[@glorius_adde5112]

How did you make the walls????????

[@PatrickOhm]

Oh that would be foam, and I just carved the foam, that's all, I do have another video similar to this, check out episode 32 of my dio videos, I have a wall tutorial there 😊🙏

[@shadowheart43]

should it be shiny like that?

[@PatrickOhm]

Probably because my light source is too bright, this is a very old video, before I had softbox lighting 🤣

[@royalfolkspark]

👍🏆

[@PatrickOhm]

🙏🙏🙏😊

[@douradobiscuit4374]

❤️❤️❤️💯🌷👏

[@bhanuwongnachiangmai4412]

What type of color do you use?

[@PatrickOhm]

I usually use spraypaint and poster color, i usually use any cheap paint, then i will cover it with a top coat to lock it all in

[@bhanuwongnachiangmai3191]

How to you put the light in?

[@PatrickOhm]

@@bhanuwongnachiangmai3191 the light is some sort of mini table light, i took that and attached it to the foam, search for "mini book reading light" online

[@yeothaichiet6689]

Hi bro Malaysia where can get this foam board?

[@PatrickOhm]

Yeo Thai Chiet oh great a Malaysian, hahaha you can try the curve or mid valley, "Art Friend"

[@yeothaichiet6689]

Ok bro glad to see Malaysia can doing diorama tutorials u are great !awesome!

[@PatrickOhm]

Yeo Thai Chiet hey thanks alot for your supporting words bro, thank you very much, anyway do stay tuned yea, lately I am busy rushing for a gundam competition this year end, will start doing more diorama videos soon when I have the time 😏👌🏼

[@aljonjetroquinto5845]

another thing may i know the Height of the whole diorama and the width and length of the base? Thanks again.

[@PatrickOhm]

I do not have the exact measurements as I usually just eyeball them, but usually a brick = shoe scale, width and height usually depends on your fig, its just an estimation 😁👌🏻

[@aljonjetroquinto5845]

@@PatrickOhm figure is about 6 inches... i really appreciate your reply thank you

[@PatrickOhm]

@@aljonjetroquinto5845 I usually use a standard height 1/12 figs as a reference, try to avoid using tall figs such as thanos as a reference, a Marvel Legends Spidey would be great, u can use those bucky body mold figures as a reference 😁👌🏻

[@aljonjetroquinto5845]

@@PatrickOhm will do.. btw have you tried creating diorama for pokemon??? Would love to see your own version 😊

[@PatrickOhm]

@@aljonjetroquinto5845 hmm pokemon, never thought of it actually but I do have tree and rocks diorama prop videos, not sure if those are useful, it would be hard to create an outdoor diorama, haha would require alot of space

[@thatdude5353]

What type of foam is that?

[@PatrickOhm]

I am using THP foam, but it all depends where u are located at, not all types of are available, but best preferred if you get blue/pink foam

[@thatdude5353]

Patrick Ohm oh gotcha, at first I thought it was packing Styrofoam but then I remembered how cheap and crappy that stuff is.

[@PatrickOhm]

@@thatdude5353 that one works as well, I do have another video that explains how I use that and how I cover up those nasty circles on the surface. Just not advisable but those are sort of okay as well, hahaha

[@surabayacustomwerks9229]

Can somebody tell me what is THP CFOAM?

[@PatrickOhm]

I have no idea what the acronym stands for but it is shown on the label, the reason why I got this foam is because this is the only accessible foam I can get, depends on which country you are from, in Malaysia I can only get those normal styrofoam, which is why I got this instead 😁👌🏻

[@Ac-np5rn]

Are there ways to harden it?

[@PatrickOhm]

The foam u mean?

[@Ac-np5rn]

@@PatrickOhm yes I'm scared not breaking it.

[@PatrickOhm]

@@Ac-np5rn okay maybe you can try stacking the layers, what I do is sometimes I use more than 1 layer to make it harder 😉

[@Ac-np5rn]

@@PatrickOhm I'm going to make the avengers tower

[@aziine]

Patrick: “...melt the puffy edges...” Me: and kill your brain cells... But really, thanks for this tutorial. It’s really helpful for the build in working on! Just, don’t melt anymore styrofoam.

[@PatrickOhm]

Hahahaha and it's bad to smell the fumes 🤣🤣🤣 thank you for your kind comment and advise, peace brother 🙏🙏

[@rolfsteppenwolf9020]

Your brain was melting before 👌🤣

[@rolfsteppenwolf9020]

1/12 scale?

[@PatrickOhm]

Yes for marvel legend / shf / mezco / mafex etc 😁👌🏻

[@paulalderson6920]

Lots of great ideas but I thought the road cracking didn't seem realistic. The edges were too sharp and the lines too straight. I loved the rock stamp and the drain cover though.

[@paulafgmalacarne]

Show

[@PatrickOhm]

Show? 🤣

[@CMC440]

You could wokr more on that cracks awfoul job, yeah dont tell me its just tutotial,,, its unacaptable

[@bkwilsey]

Looks good. But you really need to practice making those cracks. Thay don't look all that great.

[@PatrickOhm]

Yea i cant agree more, sorry and yes will try my best to be more patient with what i work with 😂 and thank you for watching and your feedback, appreciate it bro

[@capatainnemo]

nice but the drain pipe is too big

[@PatrickOhm]

😂 wanted to make sure it can be seen in pics 😂😂😂

[@dw9453]

Why Music

[@NECROMAGICIAN666]

are you italian?

[@PatrickOhm]

No I'm Malaysian 😊🙏

[@xIPoisonCobrax]

Nice.. except the cracks don't look real.

[@PatrickOhm]

Yeah that I have to work on, still not good at doing that all 😂 still struggling

[@xIPoisonCobrax]

@@PatrickOhm perhaps you Can lay a thin layer of plaster on top of the foam and make cracks by pushing on it in different parts you'll achieve realistic cracks.

[@PatrickOhm]

@@xIPoisonCobrax hmm not a bad idea, i once thought of using tempered glass for smartphones and crack em to trace the design , hahaha well i guess yours is better and easier hahaha

[@xIPoisonCobrax]

@@PatrickOhmlol yeah good luck and keep up the good work.

[@PatrickOhm]

@@xIPoisonCobrax hey thank you for watching, really appreciate it

[@ren4898]

I can't find that THC foam board anywhere=(

[@PatrickOhm]

Argh then maybe instead u can try XPS cream foam

[@vucristiano6711]

1sub for the amazing video :)))

[@PatrickOhm]

Wow thank you 😊😊

[@shrug53]

Good video but it would be 1000x better if you narrated and got rid of the ANNOYING music!

[@PatrickOhm]

😂😂 annoying music due to KZbin's terms and condition and it is hard to find a long unlicensed tune, and chose not to speak due to my thick malaysian accent 😂😂😂 thank you for watching brother 🙏🙏 much appreciated

[@westjr5085]

@@PatrickOhm - you can search for license free / royalty free music there are people who put songs up free or very cheap that may help. But great video!

[@PatrickOhm]

@@westjr5085 yes there is but not many that are able to loop without stopping for a 10 mins video, hahaha but I will try to search harder for better songs next time 🤣🤣

[@PatrickOhm]

@Righteous Dude wow thanks for the tip, will do 🙏😊

[@PatrickOhm]

@Righteous Dude hey thanks and will do, and I always do in the video descriptions, not to worry about that, and thank you again for the great tip, I did browse thru the music and most if them are really suitable, thanks alot

[@TodaysSpecialMinis]

Great tutorial, but couldn't finish watching. It's 2am here and I'm watching videos to fall asleep to and yours came on and I'm dealing with an injury - I had to jump out of bed to run and turn this off! Grr - I have my sound on 1/4 the volume and your video was still WAY TOO LOUD. Almost woke up the whole household! GRRR - please keep in mind that people may watch these videos at any place (work) and any time of day or night and super loud music is very jarring and annoying. But anyway - what little I was able to see before sprinting to mute pause this was nice.