Patron Series 3: Constructing a

Hey Folks, this is the first episode of the third Patron Series project, Constructing an #artdeco Dial Indicator. Each of the videos from this series will appear here on KZbin in due course as the project progresses. The plans for the project are available as part of the $1 tier on Patreon, and if you'd like to help me make these videos you can do so here: / about
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Robin Haerens
Charles Frodsham & Co.
Thomas Veilleux
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": amzn.to/2FObS1D
"Machinery's handbook": amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: amzn.to/2pnXM19
Sherline WW collets: amzn.to/2FYZ7F8
Optivisor Headband Magnifier: amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
Geevorks Spotting Drill Bit, M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Chamfering Tool - 3 4 5 6 8 10 12mm: amzn.to/48KiTO5
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Dialux Metal Polishing Compound White and Grey 4oz 1/4b: amzn.to/3vopCPo
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l

[@Clickspring]

Hey Folks, this is the first episode of the third Patron Series project, Constructing a Dial Indicator. Each of the videos from this series will appear here on KZbin in due course as the project progresses. The plans for the project are available as part of the $1 tier on Patreon, and if you'd like to help me make these videos you can do so here: www.patreon.com/clickspring/about - Cheers :)

[@TomSedgman]

The scale is always so hard to judge and it looks normal,until you see a gigantic thumb come into shot. Fantastic work as always Chris!

[@HangarQueen]

I'm pretty sure you've stumbled on the truth: that Chris is a giant using normal human-sized tools. That's how he makes it look so easy. It's clear that nobody could really make such intricate parts so small, so perfectly. Occam's razor: he's a giant.

[@Devorehardware]

A huge smile goes across my face any time I hear "G'day Chris here". Thanks for sharing your projects with us!

[@andersjjensen]

1) "G'day, Chris here" 2) Eyegasm after eyegasm after eyegasm, relentlessly for 20 minutes straight. 3) Chipper little "See'ya'layta" Never change, man. Never change.

[@AlsInd]

i have said this before but it cannot be over expressed. it is truly a pleasure for this old master clocksmith to watch your work. i am glad these techniques will survive for the next generations and lifts up the responsibility i have felt for being too lazy to pass on the skills myself. i have had apprentices in the past but this is a more durable and widely accessible way of passing on the skills. thank you 🙂

[@Clickspring]

Terrific to have you watching mate :)

[@adam6806]

This makes me feel good about humanity. Love you both.

[@EngineerRaisedInKingston]

Chris, your editing has always been absolutely top notch, but your recent videos, and this one in particular have taken that to a new level.. The CGI is absolutely mind blowing. That paired with the borderline insane attention to detail you have.. I'm really at a loss for words. Can't wait to see the series progress.

[@Clickspring]

Thank you mate, so pleased you enjoyed it :)

[@inund8]

My guy, that's not CGI, those are our future robot overlords. The footage was sent back in time obviously.

[@RNMSC]

@@inund8Pretty sure @ThisOldTony would simply declare that they were Brought back in time through the use of their combined lathe time machines.

[@chrisestill8825]

If Chris said it was all a series of hand drawn and painted animations, I would believe it. He is a man of many talents and is extraordinary at all of them.

[@user-yy8cs6bv1u]

Did he seriously do all the CGI in that? On top of the hundreds of hours he already put into editing? And not to mention the actual dial itself? Man...

[@miles11we]

Never thought I'd see an art deco dial indicator, looks awesome

[@1crazypj]

I'm at a loss for words, which is pretty unusual.

[@ahopkins62]

Who doesn't get excited when they hear the words, "G'day, Chris here and welcome back to Clickspring".

[@citizenrand0m]

I rarely comment but this is a special occasion indeed. Art deco and Clickspring, the mix I never knew I wanted so bad.

[@logannewman4532]

Oh. That CGI is fun! Wow!

[@hgghgguk]

I'm convinced the Antikythera mechanism was actually made by Chris and he has a working time machine that's how he knows so much about what tools were used to make it, that's probably why we don't see it anymore cos he had to go back in time an throw it into the sea so it could be found

[@musicmaneman38]

He used @ThisOldTony lathe time machine to do it.

[@serineaaskold8428]

He borrowed it from This Old Tony a few years ago

[@weilandcm]

I like the giant, automated tooling animations. Very Portal-esque.

[@andersjjensen]

And a humours contrast to the itty bitty gear wheel on the tip of his finger.

[@johnhepp]

Listening to Clickspring describe the inner workings of this dial indicator makes me believe he would make an outstanding 'Turbo Encabulator'!

[@thetrevor861]

If it wasn't already on the list, I guess it is now !

[@Bakers_Villa]

Its always insane to remeber you do all this in a broom closet

[@thetrevor861]

"G'day Chris here". Thanks for yet another stunning piece of work.

[@lorencarey7161]

I want to binge watch the whole series

[@mcseforsale]

Being from the area, I'm happy to let you know that you pronounced Waltham correctly! Growing up in New England, most dads in our neighborhoods were machinists in either the weapons or aeronautics industries. I, myself, was an apprentice machinist before jobs went to other countries in the late 80s. Yours is one of the best channels on YT, being the absolute best for machining in horology. Your Antikythera videos should be given awards for short film. Thanks for what you're doing.

[@Clickspring]

Thank you mate, I appreciate you watching :)

[@TheMatthewklos]

I live in Newburyport mass!

[@LanceMcCarthy]

The only disappointment is they turned that factory into overpriced condos

[@KingNast]

Now let's hear him try to pronounce Woburn 😂

[@mcseforsale]

@@KingNast I live in Georgia now. Try explaining Worchester to these folks! HAHAHAHA!

[@sgctactics]

Using a dial indicator to make a dial indicator... That's just straight up full circle poetry in action. I always love the concept of how those tools started. Such a repetitive process; to start with something crude and using the finished product to create the next better one, until they increasingly become as precise as the ones we're used to today. I just imagine the first true mill created that probably literally helped create the next one. I envision it being a janky, wobbly, accurate enough-ish thing that did exactly what it was designed to do: prove a concept

[@skivvy3565]

A new clickspring video? Ahh today is gonna be a good day. Let’s get the weekend started off right

[@Hubilicious90]

To further drive home the connection between horology and dial indicators: in German dial indicators are called „Messuhr“, which literally translates to „measuring clocks“.

[@TridentTrue101]

Loving the Against a Dark Background thumbnail! My favourite Ian M. Banks novel.

[@davekimball3610]

Using a dial indicator to construct a dial indicator, a wonderful paradox. Thanks for sharing!

[@christopherjones7191]

I also thought that on the test indicator. But I suppose you could use a very long lever held in a pivot since it was just to check runout and not measure.

[@BrittDurbrow]

OK, I now officially have tool envy. That thing is *cool* !!! 😎

[@Bob_Jones_]

I've been waiting for someone to build an indicator from scratch, so glad it was you, as your style and attention to detail is unmatched.

[@GordonWrigley]

Doing a dial indicator is genius, it's been a long time since I had that "wait I could make that?" reaction.

[@F0XD1E]

Very impressive on such a small scale. The little sci-fi cutscenes are a neat addition!

[@demos113]

I could never have done my old job without these, absolutely essential. 🙂👍

[@voodoochild1954]

I am in awe of such beautiful and precise work. You are truly a master craftsman.

[@Koushakur]

It gets me everytime a finger comes on screen and suddenly highlight how freaking tiny the parts are

[@damianrobinson422]

Between Chris and tony, i am never board

[@dcallan812]

Nice work. I did a 4 year apprentice to become an instrument artificer then moved to London and repaired and calibrated various bits of kit for years. We had an isolated room in springs with set temperature and humidity with an extensive set of Standards we used as references. So its almost back to work for me today. 2x 👍

[@jimsvideos7201]

I didn't need an Art Deco dial indicator yesterday, but I sure do today 😮🤩

[@TABE-O]

Excellent contribution to the world. Thankyou.

[@heighRick]

Get in, Chris made a video! Right, back when I've watched it :)

[@makebreakrepeat]

Ah, your videos are like a hot cup of tea on a frosty sunrise.

[@dietmarfinster3176]

During my apprenticeship, there were also precision mechanics at our vocational school who exhibited their work. Fascinating works As a carpenter, I could only be amazed Great work, and nice film!

[@gottfriedschuss5999]

Chris, what a fantastic project! Your workmanship, combined with the entirety of your videography, is unsurpassed in the KZbin videos I view! Thanks. I can’t wait for the next episode. Be well & Best regards.

[@gabrielmoreira7265]

I said it once and will say it again, your content and machining are absolutely gorgeous to watch

[@CheffBryan]

Fantastic to find out Waltham played such a major role, been collecting their 636 movements for years and greatly enjoy their work. Hope to make one of these some day too!

[@JW-uC]

It is always a good day when another clickspring drops :-)

[@kennethstaszak9990]

The art deco look of your indicator is outstanding!

[@Preso58]

Outstanding as always. Cannot wait to see how you've made the case. It must be the only art deco dial indicator in the world!

[@bulletproofpepper2]

As a fabricator I would not normally be interested Astro engineering precision, but that is art at it finest. Thanks for sharing.

[@bgdavenport]

Magnificent production in every aspect!

[@bendooley550]

Never ceases to amaze me the quality of both your machining, and your cinematography skills. Always a good day when one of your videos comes across my feed.

[@onegeekguy_yt]

The video is just astonishing - the quality, the editing, the music... Besides these aspects, the quality of the machining is also amazing - the precision, the explanations. I can only give it a 10/10.

[@wayneswonderarium]

I saw the illustration and I had to see this art deco build 🤤😍🤩

[@michaeltalaganis6518]

Babe wake up, new clickspring video just dropped!

[@iansmeath8674]

Chris, It would seem your design skills match or surpass your machining skills. I have always been attracted by the art deco period, that case design is spot on!

[@davidduffy9806]

Quite simply…. you’re an inspiration. First rate, first class.

[@baremetaltechtv]

Love your videos, The thought of how we go from stone tools to lathes and precision completely fascinates me, thanks for the inspiration and education. Your videos have made me commit to the idea of buying a small lathe like yours, I didn't think it would be possible for me to have a lathe at home because I'm used to much bigger larger machines at work, your approaches to solving different work holding problems shows me whats possible, so glad I found your channel!

[@Clickspring]

Awesome, so pleased to hear that!

[@jc13781]

Holy crap… I can’t believe what my eyes have just bore witness to. ❤ Between the amazing camera angles, cgi, excellent narration and pacing, and don’t even get me started on the concept and beautiful design… omg that art deco. This series is going to be a masterpiece to live in KZbin history.

[@dougmorgan6616]

I can hardly wait for the next episode.

[@tonomoto]

coffeezilla style graphics, i like it.

[@ralflisell3287]

Off the chart impressive. Thanks a lot!

[@skychaserthedragon2046]

Wooh, so art deco!

[@lohikarhu734]

Actually, as I watch, I feel that the video is lovely enough to watch, without knowing what is being done!

[@johnkelley9877]

I have used many dial indicators in the past so this is a vey interesting tutorial! Thanks for sharing this Chris.

[@howshafern420]

I find your content very calming as well as entertaining, Thank you.

[@TBJK07Jeep]

Man that indicator is going to be a work of art. I love it. It is going to have to go on my build list.

[@merlindraws3616]

ok so, i actually really like how you turned it into a space ship XP

[@ypaulbrown]

this was wonderful, learned some valuable techniques.....thank you very much, cheers from Florida, USA...Paul

[@J.C...]

Yes they can be used for many things. We, guitar players, technicians, and luthiers, use them, also. We used them to measure fret height. String height. Neck relief. All are small measurements. 1-2mm max. With neck relief being the smallest number from zero to 0.4 to 0.5mm

[@jackpijjin4088]

Most luthiers just use a feeler gauge or... business card or quarter. X)

[@624Dudley]

Thanks for another superb production, Chris 👍 I was unaware of the historical connection to Waltham, which is nearby; within the sprawling old Waltham watch factory there is nowadays an excellent technology museum, which includes displays of the former company’s many manufacturing innovations. On my next visit I’ll see whether dial indicator evolution is on display.

[@nickfosterxx]

8:05 Wait, what..? Ah. You've just given me an idea. Given that your videos are so ASMR-adjacent, even approaching an altered state of consciousness on occasion, I think that one of these days I might partake whilst enjoying some appropriately complementary substance(s). For now, a small dram of Wild Turkey 101 will suffice. Hope you don't mind. Respectfully yours etc.. PS been catching up on this project, and utterly blown away, goes without saying. And after a few years, there's some sort of cumulative ?mindfulness effect. Seriously, thank you Chris.

[@user-ky8ee4vd4o]

Magnum P.I. of KZbin! Thanks for what you do, Chris!

[@DavidR8]

Crazy good stuff Chris. Seriously.... awesome work as ever.

[@billchiasson2019]

Dittos on all the amazing comments!! Your work is amazing and impeccable!! Look forward to seeing more of this art in progress!! Thank you!

[@toomdog]

I love the foreshadowing of how monstrous the case will be after all these little parts

[@samdude1953]

Bravo, Chris. Awesome project!

[@satyris410]

Can't tell you how much I love these videos to watch in bed before I go to sleep

[@mrsmith8436]

One of the best KZbin channels on machining I have seen. Video production quality is outstanding. Keep them coming and I will keep watching and clicking like

[@jeffarmstrong1308]

Why not subscribe? ... if you have not already.

[@JoseSilveira-newhandleforYT]

Absolutely impressive precision work, as always! Not to mention editing, that is amazing :-)

[@NiftyMCD_Australia]

Absolutely amazing machining and precision, a joy to watch. Definitely way way over anything I could dream to make. i will follow with keen interest the progression of the manufacturing of the gauge.

[@mikemichelizzi2023]

I didn’t think it was possible to put more work into your videos, but you’ve gone and done it! Excellently done as usual!

[@LeMat_njx]

This'll probably sound weird, but I feel congratulations are in order? Making a dial indicator feels like a major milestone it developing one's machine shop skill. Great work, Chris, and congratulations!

[@bgdavenport]

I have a Taig tools lathe, also. I converted mine to a power feed using a geared motor and 12 volt power source...easy peasy!

[@teuth]

omg this is sooo much cooler than a ****** card press!!

[@andrewdolinskiatcarpathian]

Destined to be the most gorgeous dial indicator ever 😋

[@larrybud]

Think he'll melt his own silica to make the front glass? lol

[@WolfKenneth]

I'm so happy you are back! :)

[@aussiebloke609]

Hearing an Aussie accent talking about inches brings back memories. And yes, I'm that old. 👍

[@stoatystoat174]

Thanks again for the Antikythera Mechanism series :)

[@hansmuchler8088]

I think This Old Tony make a joke a few years ago about making your own dial indicator. Lovely video as always!

[@Tasarran]

I love that the watchmaker's lathe is so small you can use stock rods to wrench the chuck.

[@beachcomberbob3496]

I'm surprised that, as an Aussie, you aren't doing everything in metric. Good for you that you're sticking to the old ways.

[@baddonkey6876]

You really love the word "arbor"

[@divyajnana]

Sir, your videos are a work of art....making works of art, thank you.

[@MattBorgardt]

Another video that is just fun to watch ..

[@michaelrice500]

This is so absolutely cool. Steam punk robot mega factory!

[@simonhopkins3867]

You and your fellow youtube machinists are going to cost me a fortune. If you keep making content this good. I'll be begging for money to buy materials at this rate 😉. Great work mate.

[@greglaroche1753]

Enjoyable and informative video. Thanks!

[@WiscomptonBoys]

Superb! I love seeing how you bring these things to life one finely crafted part at a time. Really looking forward to the rest of this project.

[@MrFudgepump]

Saw a video with an interesting title so clicked. Heard "Gday Chris here and welcome back to Clickspring" and instantly smashed the like button 😂

[@samkeen]

Every time Chris says “120 tooth” a part of my brain goes “122th?” EVERY TIME!

[@ChillGuy511]

4 minutes in and I lit said "Wo" t a cool channel! Great quality!

[@leep_]

Wow, I just re-found your channel last night and caught an upload 16 minutes after, awesome!

[@PrinceAlhorian]

Why did I discover your channel just now!? I am a lover of the steampunk and dieselpunk esthetic, by extension i love mechanical mechanisms and machining, especially with art deco and victorian design. I'm subscribing for sure.

[@horsetowater]

12:22 phew! Well done!

[@jg00163206]

Doah! you really had me riveted. you are a very talented machinist. teach me obi-one. your my only hope. thanks for sharing.

[@daveys]

Now that’s a good looking dial indicator!