Thumbs up! Appreciate the helpful video. I was also running to the same issue with my Pavo 20 with the DJI setup. Remote control would not activate throttle, while the other channels worked. All was resolved when I removed the assigned flipped and followed your instructions to update the firmware via CLI and reload the configuration again.
@How-to-by-Lou8 ай бұрын
Glad this helped..and you were able to figure it out.. There is also a new trouble shooting video that may help down the line too.. kzbin.info/www/bejne/gnbaZnqelpaYiNE
@Juancholoco7108 ай бұрын
man it took me like 5 hours to be able to fly my drone. thanks to your videos. i crashed and the motherboard died and here i am again :)
@Juancholoco7108 ай бұрын
i was having issues flying it. i was trying to make it slow, after messing with only the throttle tunes i got it to fly how i wanted. hope that helps.
@How-to-by-Lou8 ай бұрын
@@Juancholoco710 Thanks a bunch. ..
@omenrecup Жыл бұрын
Hey there! Excellent video, really insightful! I noticed you expertly fitted a GPS module above the o3 frame - neat trick! But what caught my eye was the white component you placed in between. Is that to prevent heat transfer between the two? Would love to know what that piece is, I'm considering a similar set up. Thanks for the guidance!
@How-to-by-Lou Жыл бұрын
Thanks glad this was able to help you.. Here is what was used.. 3M hanging strips... www.amazon.com/3M-CAD17201ES-Strip-Picture-Hanging/dp/B004OKKVOC/ref=sr_1_16?keywords=3m%2Bhanging%2Bstrips&qid=1695490750&sr=8-16&th=1 Also here are some new rates that actually work for beginners thanks to fpvunknown, they actually shared these amazing rates.. A seasoned FPV Pilot who enjoys the channel.. ....kzbin.info/www/bejne/j2OumoKVprGknrc
@ersalbioldy33706 ай бұрын
ure life saver brooo, thank u so much
@How-to-by-Lou6 ай бұрын
Glad this was able to help you… Don’t forget the troubleshooting video too… kzbin.info/www/bejne/gnbaZnqelpaYiNEsi=olgJMZS2HKVKtdgY
@YonnBurgos9 ай бұрын
Great video and I appreciate you putting this together for your audience. Question: I just got a Pavo Pico, I'm a bit disappointed because it overheats, I have not been able to fly it yet, but now that I am ready to fly it, I find that the drone won't start. I think, I am ready to return it, but I wanted to get your opinion. Would you return your Pavo Pico, if so, what other drone similar to the Pavo Pico would you get?
@How-to-by-Lou9 ай бұрын
Depends... If you're an experienced pilot I'd return it and get the pavo 25v2, If you're crashing and are still learning - keep it.. It will make a great basher drone and get you ready for repairs, upgrades and custom builds when you are ready to level up. Just uploaded a new troubleshooting videokzbin.info/www/bejne/gnbaZnqelpaYiNE All in all I like it - try the new trouble shooting video.. Might help you with getting up and running..
@YonnBurgos9 ай бұрын
@@How-to-by-Lou Your last video gave me more info and clarification on how to get it set up correctly. My Pavo Pico is now up and running... your video and your words persuaded me to keep it. This thing is very sensitive with the control; I keep crashing each time I take off! I'm afraid now to break it... hahah
@How-to-by-Lou9 ай бұрын
@@YonnBurgos did you change the pid rates so that it is easy to fly indoors?
@YonnBurgos9 ай бұрын
@@How-to-by-LouHi! Yes, I got the rates. Actually, I got it from one of the viewers who commented on one of your clips. I set them 10/250/0.54. Someone also recommended adjusting the Throttle from Auto to Scale and setting it from 100 to 75, but adjusting the Throttle did not work for me, so I reversed it back to the default. What rates are you using?
@TeslaFPV4 ай бұрын
would love if you added chapters, the video is supper long with a lot ot neccessary parts, would have been more helpful if it was more to the point.
@djprimo853 ай бұрын
mine behaves the same way. but unfortunately this did not help. after i do this it does the same thing.
@How-to-by-Lou3 ай бұрын
Try the troubleshooting video that should do the trick kzbin.info/www/bejne/gnbaZnqelpaYiNEsi=NPZj7OgVojNecGoK
@mamashevalex Жыл бұрын
Я смотрю 👀 за этим мужичком с первого дня, то, как он дрон запускал и лупил его об стены вызывало подозрение что скоро будет видос, как починить паво Пико 🥲
@How-to-by-Lou Жыл бұрын
Да, вы абсолютно правы.. Следующее видео о том, как починить паво пико. Будет видео о том, как чинить моторы на паво пико и как фиксировать вал на гепрке... Но все изменилось, когда unknownfpv поделился новыми тарифами для новичков. kzbin.info/www/bejne/j2OumoKVprGknrc
@datatw Жыл бұрын
just turn of flip over and it should work properly
@How-to-by-Lou Жыл бұрын
sometimes it works and sometimes it doesn't - but folks should check and make sure they have an AUX key designated so the flip error can be turned off. good call.. thanks for charing..
@How-to-by-Lou Жыл бұрын
seems even with the latest fix it still happens. Drone will be finicky, but folks will won't know how to do the flip feature if they don't know how to add it. Thanks for the idea..
@RICO-BugkillerFPV Жыл бұрын
Still can't arm my pico. betaflight arming flag says "No valid receiver signal detected" I have the updated FC. Using DJI 03 / ELRS. Set the toggle for "arm without fix". Still can't arm. Both goggles and controller are paired to the 03 unit. Any ideas I can try or did I order the wrong tx?
@How-to-by-Lou Жыл бұрын
go into your email and check your order. it should read: Pavo Pico Brushless Whoop Quadcopter × 1 DJI O3 VTX / ExpressLRS 2.4G
@RICO-BugkillerFPV Жыл бұрын
@@How-to-by-Lou that's what was sent less than two weeks ago. New to fpv thought the Pico would be a good drone to get into Betaflight and FPV.
@How-to-by-Lou Жыл бұрын
@@RICO-BugkillerFPV did you remove flip and beeper ?
@RICO-BugkillerFPV Жыл бұрын
@@How-to-by-Lou I'll have to check. Don't remember activating it. Thank you for spending time on your Sunday with this.
@YonnBurgos9 ай бұрын
@@RICO-BugkillerFPVWould you return your Pavo Pico? I see not too many people are happy with it.