Been doing FPV quads for 8 years now. Still learning-appreciate you explaining the contrast between fixed wings and multirotors. Also, even if I’m not learning new points, I really appreciate the effort you’re putting into the channel and these clear and thorough informational videos. Cheers Pawel!
@plymouthrovadventures.6468 ай бұрын
Hey.. Its nice to have it all explained in plain language. . Slow down a little.
@cold-frontin_penguin79028 ай бұрын
You know they have a playback speed option on YT right?
@sa_med6 ай бұрын
Wdym he is talking really slowly i put it on ×1.25 speed lol
@jplo52998 ай бұрын
Great video and nice summary/break down of modern FC's. The CC3d board was a great FC. Would have liked to have seen the continuation of those boards as they were PWM plug and play..but everything changes.
@FPVUniversity8 ай бұрын
You can say whatever you want about CC3D, but no, it was not great :) In many ways it was an inferior to Naze32 for example
@andreasmuller50288 ай бұрын
Hallo ich möchte einen Copter bauen und habe noch einen Mateksts F722-hd meine frage wäre ob ich denn mit inav verwenden kann. Eine DJI O3 möchte ich auch noch verbauen
@joestubbs31388 ай бұрын
You have a unique knowledge of electronic flight control, great to listen to you ...joe
@FPVUniversity8 ай бұрын
thank you!
@seilvotezoolo45198 ай бұрын
Привіт. Чи можливо змінити "Output Mapping" для моторів? Якщо в мене S4 пін не працює на FC, я додаю 5й мотор, припаявши його до іншого піна "S5". Така сама ситуація з серво, я його припаяв до іншого піну, але FC веодно показує минуле налаштування.. Можливо прописати або якось поміняти в INAV піни, якщо припаяно по іншому? Дякую.
@TL_RC5 ай бұрын
Love your content! Always full of great information. Is there a way, or is there information available on converting a FC target from Betaflight to a target for iNav? Is it incredibly difficult to convert? I have a dozen F7 T-Motor and Hobbywing FC's and I'd love to try iNav with one of those. I currently use some old F4 Matek FC's, but they are getting pretty ancient.
@allrcflyingisfun8 ай бұрын
Morning Pavel I have been constructing quadcopters since the days of clean flight and kk 1.2 boards I'm having a problem with a speedy b f405 version 3 board where the elrs receiver connects to my tx16 transmitter and works and shows up in beta flight version 4.4.3 but as soon as you power up the quad with a battery you totally lose the control linkage this is something I've never come across in all my years of flight controllers and many quadcopters that I've made and I have no idea I have only four items connected to these flight controller the elrs receiver on txrx 2 a vista digital system on txrx1 and the GPS on txrx6 and a buzzer connected to the relevant buzzer points all seem to work fine when they quad is connected to the computer but when the quad is powered up still connected to the computer I totally lose receiver connectivity I'm hoping you can help me with this strange problem thanks again Pavel
@kjsj23048 ай бұрын
Hi Pawel Your videos are great Requesting you to make a video on INav 7 for VTOL plane with 4quad motors for vertical takeoff/landing and normal plane motor for Horizontal plane flight
@syros2188 ай бұрын
Cześć Paweł Fajny filmik i twój komentarz niestety nie znam angielskiego tłumaczenie na pl daje ogólne pojęcie. Głównie latam samolotami jaki poleciał byś kontroler do samolotu?👋
@richiemillet6978 ай бұрын
What is the target of the JHEF405PRO
@Crusader46336 ай бұрын
"We have to have a brain" - truer words have never been spoken! :D
@Sonic_Ox8 ай бұрын
Lots of great information here Pawel. Thank you.
@FPVUniversity8 ай бұрын
Glad it was helpful!
@vibrantfotoz51628 ай бұрын
Simply very clear presentation. Thanks a lot brother. Pls keep it up
@FPVUniversity8 ай бұрын
Thanks and welcome
@vibrantfotoz51628 ай бұрын
@@FPVUniversity Bro KINDLY help me regard dis pls 1. 6s or 8s charger to go right now I have 6s batt 2. Toolkitrc la lot of models which one to go pls seggest a model 3. Can I use 60W Mobile charger head to charge toolkitrc charger. If not means kindly suggest budget power supply Kindly guide me bro, Thanks in advance.
@nicholassmith23178 ай бұрын
Thanks! Well done!
@FPVUniversity8 ай бұрын
Glad you liked it!
@MCsCreations8 ай бұрын
Thanks for all the info, Pawel! 😊 Stay safe there with your family! 🖖😊
@FPVUniversity8 ай бұрын
My pleasure!!
@fklotaloi6 ай бұрын
Hello Zeleneski, thnx for uploading... Learned sme basic on FPV. 👍
@FPVUniversity6 ай бұрын
The "Zeleneski" part not that funny as I'm not Ukrainian. But thanks anyway
@fklotaloi6 ай бұрын
@@FPVUniversity Sorry i thought u as Ukrainian. Can u tell me that this FC can also be used for helicopter?? And if u let us knw abt ESC protocols would be great and thnx😊
@canadiangemstones76362 ай бұрын
@@fklotaloiHey orc, why aren’t you on RuTube, or at the front?