Pawnee Brave 20cc from Hangar 9

[@urbanairgunner6402]

I am in the middle of my Pawnee build. I use stinger engines on all of my planes. I thought of putting a twin on this build but had a new stinger 20cc single already so thats whats going on it. I can always go back later and change the engine out part of the fun of the hobby great video thanks for posting it

[@tropicairrl6121]

Good luck with your build. I am sure you will enjoy this one. Thanks for watching!

[@jorgemorales2583]

Richard recién mi saludo. Deseo felicitarte por el video. Una representación limpia y clara del vuelo. Las entradas y salidas de las tomas contribuyen a la delicadeza del vuelo. Y las tomas del lugar preciosas.

[@captainbob406]

Interesting.... I have a Pawnee and have been trying to decide if I want to use a DLE 20cc single or a Stinger 20cc twin for power. I see you were able to mount the twin without the heads sticking out the sides of the cowl. That is pretty cool. Couple questions for you.... Do you think the single would have given you more power than the twin? I noticed you mentioned it was scale like in performance. Also, I have heard with the DLE installed there is still a considerable amount of nose weight needed to be added to get to proper CoG. After installing the twin, how difficult was it to get the correct CoG? Did it require a ton of weight in the nose, tail? The plane appeared to be a good flyer. Appreciate your thoughts. Great video!

[@tropicairrl6121]

Thanks for watching! Use mostly twins as I do not like the vibrations of the singles, also videos with a wing mounted cam would not have been possible. Do not think that a 20cc single would have more power as the new Stinger twin. My setup is quite heavy but did not need any additional weight to balance using three 3000mAh battery packs. One just in front of the CG and two behind. The Pawnee flies very predictable and basic aerobatics can be flown quite clean but for knife edge the elevator corners have to be cut at the apropiate angel to get max rudder throw. Also reenforced the fuselage, at the bulkhead where the wing leading edge rests, with glass fiber mat and resin as suggested in one of the RCForums. It is actually a fun plane to fly and also well build. Now, after 70+ flights, I am happy that I used the 20cc Stinger for this type of plane, eventhough I wished to have some more power after the first few flights. Regards

[@tmeyer2022]

Great slack key guitar, but the video makes me air-sick.

[@DanielMigneault]

I'm getting ready to balance mine (CG) is the CG correct by instructions or you changed it? thanks fore your input.

[@felice661]

hola amigo, hoy arribó al muelle de Tallaboa el barco italiano Enrico Fermi. ¿Puedes hacerme otro vídeo sobre este barco? Te lo vuelvo a preguntar porque antes era azul, ahora es naranja ja. Gracias amigo

[@tropicairrl6121]

Hola Felice, espero que te encuentras bien. Estoy fuera de Puerto Rico regresando a mediados de noviembre sería en la proxima ocasión saludos